X-Maxx 8s (77086-4) Front Assembly Exploded View

1726: Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)

$1.00

2535: Screws, 4x10mm countersunk machine (hex drive) (6)

$2.50

2546: Screws, 4x15mm countersunk machine (hex drive) (6)

$2.50

2551: Screws, 3x10mm countersunk machine (6) (hex drive)

$2.50

2575: Screws, 3x6mm button-head machine (hex drive) (6)

$2.50

2576: Screws, 3x8mm button-head machine (hex drive) (6)

$2.50

2577: Screws, 3x10mm button-head machine (hex drive) (6)

$2.50

2578: Screws, 3x12mm button-head machine (hex drive) (6)

$2.50

2579: Screws, 3x15mm button-head machine (hex drive) (6)

$2.50

2581: Screws, 3x25mm button-head machine (hex drive) (6)

$2.50

2584: Head screws, 3x12mm cap-head machine (hex drive) (6) (TRX® 2.5, 2.5R, 3.3)

$2.50

2585: Screws, 3x20mm cap-head machine (hex drive) (6)

$2.50

2586: Screws, 3x15mm cap-head machine (hex drive) (6)

$2.50

2587: Screws, 3x10mm caphead machine (6) (no washer)

$2.50

2589: Screws, 4x20mm button-head machine (hex drive) (6)

$2.50

2594: Screws, 4x15mm button-head machine (hex drive) (6)

$3.00

2595: Screws, 4x35mm button-head machine (hex drive) (6)

$3.00

2596: Screws, 4x25mm button-head machine (hex drive) (6)

$3.00

2597: Screws, 4x22mm button-head machine (hex drive) (6)

$3.00

2598X: Screws, 4x30mm button-head machine (hex drive) (6)

$3.00

2743: Set (grub) screws, 3mm hardened (12)

$3.00

3234: Screws, 2.5x14mm cap-head machine (hex drive) (6)

$3.00

3362: Heat sink, Velineon® 1200XL

$20.00

3474: Dual cooling fan kit (with shroud), Velineon® 1200XL motor

$39.95

3475: Cooling fan, Velineon® VXL ESC (fits VXL-6s & VXL-8s)

$19.95

3491: Motor, Velineon® 1200XL, brushless

$249.95

3496T: Velineon® VXL-8s Electronic Speed Control, waterproof (brushless) (fwd/rev/brake)

$249.95

3642X: Shoulder screws, Ultra Shocks (3x12 hex drive) (6)

$3.00

3646: Screws, 3x15mm flat-head machine (hex drive) (6)

$2.50

3931: Screws, 3x8mm flat-head machine (hex drive) (6)

$2.50

3933: Screws, 4x16mm button-head machine (hex drive) (6)

$2.50

3937: Screws, 4x12mm button-head machine (hex drive) (6)

$2.50

3938: Screws, 4x14mm button-head machine (hex drive) (6)

$2.50

4859: CS 3x10 flathead (hex drive)

$1.75

4897X: Screws, set (grub), 4mm (with heavy duty threadlock) (6)

$3.50

4955: Pins, axle (2.5x12mm) (4)

$1.00

5106: Ball Bearing, blue rubber sealed (15x24x5) (2)

$8.00

5106A: Ball bearing, black rubber sealed (15x24x5mm) (2)

$8.00

5107A: Ball Bearing, black rubber sealed (17x26x5) (2)

$8.00

5116: Ball bearings, blue rubber sealed (5x11x4mm) (2)

$3.50

5119: Ball bearings, blue rubber sealed (10x15x4mm) (2)

$7.00

5120A: Ball bearings, black rubber sealed (12x18x4mm) (2)

$8.00

5180A: Ball bearings, black rubber sealed (6x13x5mm) (2)

$4.00

5182A: Ball bearing, black rubber sealed (20x27x4mm) (2)

$10.00

5196A: Ball bearing, black rubber sealed (20x32x7mm) (2)

$10.00

5525: Rod ends (12)/ hollow balls (12)

$9.00

6447R: Spur gear, 46-tooth, steel (wide-face, 1.0 metric pitch)

$18.00

6448R: Spur gear, 50-tooth, steel (wide-face, 1.0 metric pitch)

$18.00

6449R: Spur gear, 54-tooth, steel (wide-face, 1.0 metric pitch)

$18.00

6449X: Spur gear, 54-tooth, steel (1.0 metric pitch)

$18.00

6484X: Gear, 11-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

$4.00

6485X: Gear, 12-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

$4.00

6486X: Gear, 13-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

$4.00

6487X: Gear, 15-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

$4.00

6488X: Gear, 14-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

$4.00

6489X: Gear, 16-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

$4.00

6490X: Gear, 17-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

$4.00

6491R: Gear, 18-T pinion (machined) (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

$10.00

6491X: Gear, 18-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

$5.00

7710: Body reinforcement set (fits #7711 body)

$6.00

7711: Body, X-Maxx® (clear, trimmed, requires painting)/ window masks/ decal sheet

$69.95

7711T: Body, X-Maxx®, Rock n' Roll (painted, decals applied) (assembled with tailgate protector)

$99.95

7711X: Body, X-Maxx®, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheet

$84.95

7712: Tailgate protector/ 3x8mm flathead screw (4)

$6.00

7713X: Body support, rear/ 3x15mm CS (2) / 3x15mm flat-head machine (2) (fits X-Maxx®)

$15.00

7714X: Chassis top brace

$8.00

7715: Body mounts, front & rear/ 3x15mm BCS (1)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (6)/ 3x15mm flat-head machine screw (2)

$22.00

7716: Mount, tie bar, front (1)/ rear (1)

$6.00

7717X: Spacer, battery compartment (2)/ foam blocks (4)/ foam pad (2)

$8.00

7718: Battery hold-down mounts, left (2)/ right (2)/ 3x18mm CS (4)

$8.00

7719: Battery hold-down (2)/ foam pad (2)

$7.00

7720X: Bulkhead, front (upper)

$5.00

7721: Bulkhead, front (lower)

$15.00

7722: Chassis

$22.00

7723: Nerf bars, chassis (2)

$6.00

7724: Box, receiver (sealed)/ wire cover/ foam pads/ silicone grease/ 3x15 CS (4)

$6.00

7726: Bulkhead tie bar, upper (1)/ lower (2) (steel)

$10.00

7727X: Bulkhead, rear (upper & lower), center differential (replacing #7727 & #7728 requires #5108 ball bearings (2))

$20.00

7729: Suspension arm, upper (left or right, front or rear) (2)

$8.00

7730: Suspension arm, lower (right, front or rear) (1)

$10.00

7731: Suspension arm, lower (left, front or rear) (1)

$10.00

7732: Caster blocks (c-hubs), left & right

$6.00

7733: Bumper mount, front/ bumper support

$7.00

7734: Bumper mount, rear/ bumper support

7737X: Steering blocks, left & right (requires 20x32x7 ball bearings)

$6.00

7738: Shock tower, rear (left & right halves)

$10.00

7739: Shock tower, front (left & right halves)

$10.00

7740: Suspension pin set, front or rear corner (hardened steel), 4x85mm (1), 4x47mm (3), 4x33mm (2) (qty 4, #7740 required for complete set)

$8.00

7741: Suspension pins, 4x85mm (hardened steel) (2)

$4.00

7742: Suspension pin set, shock mount (front or rear, hardened steel), 4x25mm (2), 4x38mm (2)

$4.50

7743: Suspension pin retainer (4)

$2.50

7744: Skidplate, front (1), rear (1)/ rubber impact cushion (2)

$10.00

7745: Skidplate, center

$10.00

7746: Steering bellcranks/ bellcrank support/servo saver/ servo saver spring/ draglink/ 3x20mm shoulder screws (2)

$12.00

7747: Servo horn, steering/ linkage, steering (46mm, assembled with pivot balls)

$4.00

7748: Toe links, molded composite, 173mm (158mm center to center) (black) (2)

$8.50

7748G: Toe links, X-Maxx® (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 10mm (1)

$49.95

7748R: Toe links, X-Maxx® (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 10mm (1)

$49.95

7748X: Toe links, X-Maxx® (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 10mm (1)

$49.95

7750X: Driveshaft, steel constant-velocity (heavy duty, shaft only, 160mm) (1) (replacing #7750 also requires #7751X, #7754X and #7768 or #7768R)

$16.00

7751X: Rebuild kit, steel constant-velocity driveshaft (includes pins for 2 driveshaft assemblies (for use only with #7750X driveshaft)

$4.00

7752X: Carriers, stub axle (left & right) (requires 20x32x7 ball bearings)

$6.00

7754X: Drive cup (1)/ 3x8mm CS (for use only with #7750X driveshaft)

$12.00

7755: Driveshaft assembly, center, aluminum

$12.00

7756: Wheel hubs, hex (2)/ hex clips (2)

$3.00

7756G: Wheel hubs, hex, aluminum (green-anodized) (4)

$20.00

7756R: Wheel hubs, hex, aluminum (red-anodized) (4)

$20.00

7756X: Wheel hubs, hex, aluminum (blue-anodized) (4)

$20.00

7757: Wheel hex clips (6)

$3.00

7758: Wheel nuts, splined, 17mm, serrated (blue-anodized) (4)

$12.00

7758A: Wheel nuts, splined, 17mm, serrated (black-anodized) (4)

$12.00

7758G: Wheel nuts, splined, 17mm, serrated (green-anodized) (4)

$12.00

7758R: Wheel nuts, splined, 17mm, serrated (red-anodized) (4)

$12.00

7758T: Wheel nuts, splined, 17mm, serrated (orange-anodized) (4)

$12.00

7760: Motor mounts (front and rear)/ pins (2)

$5.00

7761: Shocks, GTX, aluminum, blue-anodized (fully assembled w/o springs) (2)

$69.95

7761A: Shocks, GTX, aluminum (black-anodized) (fully assembled w/o springs) (2)

$69.95

7761G: Shocks, GTX, aluminum, green-anodized (fully assembled w/o springs) (2)

$69.95

7761R: Shocks, GTX, aluminum, red-anodized (fully assembled w/o springs) (2)

$69.95

7761T: Shocks, GTX, aluminum, orange-anodized (fully assembled w/o springs) (2)

$69.95

7763: Shock shafts, GTX, 110mm (assembled with rod ends & hollow balls) (steel, chrome finish) (2)

$18.00

7763T: Shaft, GTX shock TiN-coated (2) (assembled with rod ends and steel hollow balls)

$25.95

7764: Shock caps, GTX shocks/ spring perch/ adjusters/ 2.5x14 CS (2) (for 2 shocks)

$6.00

7764A: Shock caps, aluminum (blue-anodized), GTX shocks (4)/ spacers (8)

$52.95

7764G: Shock caps, aluminum (green-anodized), GTX shocks (4)/ spacers (8)

$52.95

7764R: Shock caps, aluminum (red-anodized), GTX shocks (4)/ spacers (8)

$52.95

7764X: Shock caps, aluminum (hard anodized, PTFE-coated), GTX shocks (4)/ spacers (8)

$54.95

7765: Body, GTX shock (aluminum, blue-anodized) (1)

$20.00

7765G: Body, GTX shock (aluminum, green-anodized) (1)

$20.00

7765R: Body, GTX shock (aluminum, red-anodized) (1)

$20.00

7765T: Body, GTX shock (aluminum, orange-anodized) (1)

$20.00

7765X: Body, GTX shock (aluminum, hard-anodized, PTFE-coated) (1)

$24.00

7766: Springs, shock (natural finish) (GTX) (1.055 rate) (2)

$14.00

7767: Spring retainer (adjuster), blue-anodized aluminum, GTX shocks (4) (assembled with o-ring)

$22.95

7767G: Spring retainer (adjuster), green-anodized aluminum, GTX shocks (4) (assembled with o-ring)

$25.00

7767R: Spring retainer (adjuster), red-anodized aluminum, GTX shocks (4) (assembled with o-ring)

$25.00

7767X: Spring retainer (adjuster), PTFE-coated aluminum, GTX shocks (4) (assembled with o-ring)

$22.95

7768: Stub axle, aluminum, (blue-anodized) (1) (for use only with #7750X or 7896 driveshaft)

$15.00

7768A: Stub axle, aluminum (black-anodized) (1) (for use only with #7750X or 7896 driveshaft)

$15.00

7768G: Stub axle, aluminum, (green-anodized) (1) (for use only with #7750X or 7896 driveshaft)

$15.00

7768R: Stub axle, aluminum, (red-anodized) (1) (for use only with #7750X or 7896 driveshaft)

$15.00

7768T: Stub axle, aluminum, (orange-anodized) (1) (for use only with #7750X or 7896 driveshaft)

$15.00

7770X: Tires, Maxx® AT (left & right) (2)/ foam inserts (2)

$43.95

7771: Wheels, X-Maxx®, black (left and right)

$15.00

7772A: Tires & wheels, assembled, glued (X-Maxx® black chrome wheels, Maxx® AT tires, foam inserts) (left & right) (2)

$69.95

7772G: Tires & wheels, assembled, glued (X-Maxx® green wheels, Maxx® AT tires, foam inserts) (left & right) (2)

$62.95

7772R: Tires & wheels, assembled, glued (X-Maxx® satin chrome wheels, Maxx® AT tires, foam inserts) (left & right) (2)

$69.95

7772T: Tires & wheels, assembled, glued (X-Maxx® orange wheels, Maxx® AT tires, foam inserts) (left & right) (2)

$62.95

7772X: Tires & wheels, assembled, glued (X-Maxx® black wheels, Maxx® AT tires, foam inserts) (left & right) (2)

$62.95

7775: Wheels, wheelie bar (2)/ axles, wheelie bar (2)/ 10x15x4 plastic bushings (4) (for #7776, 8976, or 9576 wheelie bar)

$6.00

7776: Wheelie bar, black (assembled)

$28.00

7780: Housing, differential (front/rear)

$3.00

7781: Carrier, differential/ x-ring gaskets (2)/ ring gear gasket/ 16X23.5X.5 TW

$4.00

7781X: Carrier, differential (aluminum)/ (requires #7783X spider gear shaft)

$20.00

7782: Gear set, differential (output gears (2)/ spider gears (4)/16X23.5X.5 TW(2))

$20.00

7783: Spider gear shaft (2)/ spacers (4)/16X23.5X.5 TW (2)

$8.00

7783X: Spider gear shaft (2)/ spacers (4)/16x23.5x.5 stainless washer (2) (for #7781X aluminum differential carrier)

$10.00

7784X: Output gear, 51-tooth, metal (requires #7785X input gear)

$12.00

7785X: Input gear, transmission, 20-tooth/ 2.5x12mm pin

$4.00

7786X: Input shaft, transmission (cush drive)

$6.00

7787-BLUE: Cover, gear (blue-anodized 6061-T6 aluminum)

$29.95

7787-GRAY: Cover, gear (gray-anodized 6061-T6 aluminum)

$29.95

7787-GRN: Cover, gear (green-anodized 6061-T6 aluminum)

$29.95

7787-ORNG: Cover, gear (orange-anodized 6061-T6 aluminum)

$29.95

7787-RED: Cover, gear (red-anodized 6061-T6 aluminum)

$29.95

7790: Pinion gear, differential, 11-tooth (front) (heavy duty) (use with #7792 35-tooth differential ring gear)

$10.00

7791: Pinion gear, differential, 11-tooth (rear) (heavy duty) (use with #7792 35-tooth differential ring gear)

$8.00

7792: Ring gear, differential, 35-tooth (heavy duty) (use with #7790, #7791 11-tooth differential pinion gears)

$10.00

7793X: Housing, cush drive (front & rear halves)

$3.00

7794: Cush drive key/ pin/ elastomer damper

$3.00

7811: Body, X-Maxx®, orange (painted, decals applied) (assembled with front & rear body mounts, rear body support, roof skid plate, and tailgate protector)

$99.95

7811G: Body, X-Maxx®, green (painted, decals applied) (assembled with front & rear body mounts, rear body support, roof skid plate, and tailgate protector)

$99.95

7811R: Body, X-Maxx®, red (painted, decals applied) (assembled with front & rear body mounts, rear body support, roof skid plate, and tailgate protector)

$99.95

7817: Skid plate, roof (body) (black)/ 3x15mm CS (4) (requires #7713X to mount)

$10.00

7817G: Skid plate, roof (body) (green)/ 3x15mm CS (4) (requires #7713X to mount)

$10.00

7817R: Skid plate, roof (body) (red)/ 3x15mm CS (4) (requires #7713X to mount)

$10.00

7817T: Skid plate, roof (body) (orange)/ 3x15mm CS (4) (requires #7713X to mount)

$10.00

7817X: Skid plate, roof (body) (blue)/ 3x15mm CS (4) (requires #7713X to mount)

$10.00

7832: Caster blocks (c-hubs), left & right

$8.00

7836: Steering blocks, left & right

$8.00

7836X: Steering blocks, left & right/ caster blocks (c-hubs), left & right/ 20x32x7mm bearings (2)/ 15x24x5mm bearings (2)

$24.95

7852: Carriers, stub axle (rear) (left & right)

$9.00

7852X: Carriers, stub axle (rear) (left & right)/ 20x32x7mm bearings (2)/ 15x24x5mm bearings (2)

$24.95

7853: Springs, shock (natural finish) (GTX) (0.824 rate, white stripe) (2)

$16.00

7854: Springs, shock (natural finish) (GTX) (0.929 rate, orange stripe) (2)

$16.00

7855: Springs, shock (natural finish) (GTX) (1.199 rate, green stripe) (2)

$16.00

7856: Springs, shock (natural finish) (GTX) (1.346 rate, blue stripe) (2)

$17.00

7857: Springs, shock (natural finish) (GTX) (1.450 rate, black stripe) (2)

$17.00

7858: Springs, shock (natural finish) (GTX) (1.538 rate, red stripe) (2)

$17.00

7878X: Spacer, motor shaft (steel)/ e-clip (1)

$2.00

7880: Differential, front, complete (fits X-Maxx® 8s or XRT®)

$59.95

7881: Differential, rear, complete (fits X-Maxx® 8s or XRT®)

$49.95

7887: Covers, gear (3)

$10.00

X-Maxx 8s (77086-4) Front Assembly Exploded View

X-Maxx 8s (77086-4) Body Assembly Exploded View

X-Maxx 8s (77086-4) Chassis Assembly Exploded View

X-Maxx 8s (77086-4) Front Assembly Exploded View

X-Maxx 8s (77086-4) Modular Assembly Exploded View

X-Maxx 8s (77086-4) Rear Assembly Exploded View

View PDF

Enter your email address to Subscribe.