Traxxas Maxx® (89076-4) Transmission Assembly Exploded View

2550: Screws, 3x8mm countersunk machine (6) (hex drive)

$2.50

2551: Screws, 3x10mm countersunk machine (6) (hex drive)

$2.50

2577: Screws, 3x10mm button-head machine (hex drive) (6)

$2.50

2578: Screws, 3x12mm button-head machine (hex drive) (6)

$2.50

2584: Head screws, 3x12mm cap-head machine (hex drive) (6) (TRX® 2.5, 2.5R, 3.3)

$2.50

2587: Screws, 3x10mm caphead machine (6) (no washer)

$2.50

2597: Screws, 4x22mm button-head machine (hex drive) (6)

$3.00

3461: Motor, Velineon® 540XL, 2400Kv 70mm, brushless (assembled with 6.5mm gold-plated bullet connectors) (for Maxx®/Hoss®) (not for use in marine models)

$119.95

3462: Heat sink, Velineon® 540XL motor

$10.00

3463: Cooling fan kit (with shroud), Velineon® 540XL motor

$24.95

3475: Cooling fan, Velineon® VXL ESC (fits VXL-6s & VXL-8s)

$19.95

3642: Attachment screws, shock (3x12mm shoulder screws) (6)

$3.00

3646: Screws, 3x15mm flat-head machine (hex drive) (6)

$2.50

3937: Screws, 4x12mm button-head machine (hex drive) (6)

$2.50

4859: CS 3x10 flathead (hex drive)

$1.75

4955: Pins, axle (2.5x12mm) (4)

$1.00

5101: Ball bearings, blue rubber sealed (12x21x5mm) (2)

$8.00

5106: Ball Bearing, blue rubber sealed (15x24x5) (2)

$8.00

5106A: Ball bearing, black rubber sealed (15x24x5mm) (2)

$8.00

5120A: Ball bearings, black rubber sealed (12x18x4mm) (2)

$8.00

5180A: Ball bearings, black rubber sealed (6x13x5mm) (2)

$4.00

5677R: Cover, gear/ 3x8mm CS (1) (for single motor installation, use with motor plate #5690X)

$3.50

6447: Spur Gear, 46-tooth (1.0 metric pitch)

$3.00

6447R: Spur gear, 46-tooth, steel (wide-face, 1.0 metric pitch)

$18.00

6448: Spur Gear, 50-tooth (1.0 metric pitch)

$3.00

6448R: Spur gear, 50-tooth, steel (wide-face, 1.0 metric pitch)

$18.00

6449: Spur Gear, 54-tooth (1.0 metric pitch)

$3.00

6449R: Spur gear, 54-tooth, steel (wide-face, 1.0 metric pitch)

$18.00

6465: Cush drive key/ pin/ elastomer damper

$2.50

6496X: Gear, 24-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

$6.00

7793X: Housing, cush drive (front & rear halves)

$3.00

8690: Plate, motor

$12.00

8910: Body reinforcement set, Maxx® (fits #8911 body)

$6.00

8911: Body, Maxx® (clear, requires painting)/ window masks/ decal sheet

$29.95

8911G: Body, Maxx®, green (painted)/ decal sheet

$69.95

8911P: Body, Maxx®, red (painted)/ decal sheet

$69.95

8911T: Body, Maxx®, orange (painted)/ decal sheet

$69.95

8911X: Body, Maxx®, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheet

$39.95

8912: Tailgate protector/ 3x10mm flat-head screw (3)

$4.00

8912G: Tailgate protector, green/ 3x10mm flat-head screw (3)

$4.00

8912R: Tailgate protector, red/ 3x10mm flat-head screw (3)

$4.00

8912T: Tailgate protector, orange/ 3x10mm flat-head screw (3)

$4.00

8912X: Tailgate protector, blue/ 3x10mm flat-head screw (3

$4.00

8913: Body support, rear/ 3x10mm CS (4) (fits Maxx®)

$7.00

8914: Body, Maxx®, heavy duty (clear, 1.5mm, requires painting)/ window masks/ decal sheet

$39.95

8915: Body mounts, front & rear/ 3x12mm BCS (1)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (9)

$18.00

8917: Skid plate, roof (body) (black)/ 3x10mm CS (4)

$6.00

8917G: Skid plate, roof (body) (green)/ 3x10mm CS (4)

$6.00

8917R: Skid plate, roof (body) (red)/ 3x10mm CS (4)

$6.00

8917T: Skid plate, roof (body) (orange)/ 3x10mm CS (4)

$6.00

8917X: Skid plate, roof (body) (blue)/ 3x10mm CS (4)

$6.00

8928: Bulkhead, rear (upper and lower)

$12.00

8939: Shock tower, rear (left & right halves)

$8.00

8945: Skidplate, center/ 4x20 CCS (4)/ 3x10 CS (4)

$8.00

8949: Differential output yoke assembly, front or rear (assembled with external-splined half shaft)

$7.00

8953: Stub axle assembly, outer (front or rear) (assembled with internal-splined half shaft)

$7.00

8954: Drive hub, front (1)/ 3x10 screw pin (1)

$6.00

8955: Driveshaft, center, aluminum

$10.00

8960: Motor mounts (front and rear)/ 4x10 BCS with split and flat washers (1)/ pin (1)

$10.00

8960X: Motor mounts (front and rear)/ 4x10 BCS with split and flat washers (1)/ pin (1) (for installation of #3481 or #3483 motor into Maxx® or Maxx® Slash®)

$8.00

8981: Carrier, differential/ x-ring gasket/ o-ring (2)/ 10x19.5x0.5 TW

$4.00

8982: Gear set, differential (output gears (2)/ spider gears (4)/ spider gear shaft (2)/ output shaft (2)/ 2.5x13.8 pin (2))

$18.00

8983: Gear shaft, fixed/ driveshaft adapter (requires #8950X or 8996X steel constant-velocity driveshafts and #8984 transmission output gear)

$4.00

8984: Output gear, transmission, 44-tooth (1) (requires #8950X or 8996X steel constant-velocity driveshafts and #8983 driveshaft adapter)

$4.00

8985: Input gear, transmission, 22-tooth/ 2.5x12mm pin

$4.00

8986: Input shaft, transmission

$3.00

8987: Covers, gear (2)

$4.00

8988: Gear, center differential, 44-tooth

$11.00

Traxxas Maxx® (89076-4) Transmission Assembly Exploded View

View PDF

Enter your email address to Subscribe.