TRX-4 Scale and Trail Crawler (82056-4) Chassis Assembly Exploded View

1552: 3x8mm Hex Cap Screws (6)/ Washers (6)/ Wrench (1)

$3.00

1985: PTFE-coated Washers, 5x8x0.5mm (20) (use with ball bearings)

$2.00

2065A: Servo, sub-micro, waterproof

$29.95

2065R: Servo, sub-micro, waterproof, metal gear

$44.95

2075R: Servo, digital high-speed, metal gear (ball bearing), waterproof

$49.95

2075X: Servo, digital high-torque, metal gear (ball bearing), waterproof

$49.95

2523: Screws, 2.5x10 countersunk machine (hex drive) (6)

$2.50

2551: Screws, 3x10mm countersunk machine (6) (hex drive)

$2.50

2564: Screws, 2x8mm cap-head machine (hex drive) (6)

$2.00

2575: Screws, 3x6mm button-head machine (hex drive) (6)

$2.50

2576: Screws, 3x8mm button-head machine (hex drive) (6)

$2.50

2577: Screws, 3x10mm button-head machine (hex drive) (6)

$2.50

2578: Screws, 3x12mm button-head machine (hex drive) (6)

$2.50

2579: Screws, 3x15mm button-head machine (hex drive) (6)

$2.50

2580: Screws, 3x20mm button-head machine (hex drive) (6)

$2.50

2582: Screws, 3x30mm button-head machine (hex drive) (6)

$2.50

2591: Screws, 3x23mm button-head machine (hex drive) (6)

$2.50

2616: Screws, 3x27mm button-head machine (hex drive) (6)

$2.00

2617: Screws, 2.5x8mm button-head machine (hex drive) (6)

$2.00

2618: Screws, 2.5x16mm cap-head machine (6)

$2.00

3025: XL-5HV 3s Electronic Speed Control, waterproof (low-voltage detection, fwd/rev/brake)

$69.95

3215: Screws, 2.5x6mm cap-head machine (hex drive) (6)

$2.00

3229: Screws, 2.5x10mm cap-head machine (hex drive) (6)

$2.50

3236: Screws, 2.5x12mm cap-head machine (6)

$2.50

3647: Nuts, 4mm flanged nylon locking (steel, serrated) (8)

$3.25

3931: Screws, 3x8mm flat-head machine (hex drive) (6)

$2.50

3965: Screws, 2.5x8mm cap-head machine (6)

$2.50

3975R: Motor, Titan 550, reverse rotation (21-turns/ 14 volts) (1)

$19.95

4859: CS 3x10 flathead (hex drive)

$1.75

5104A: Ball bearings, black rubber sealed (4x10x4mm) (2)

$4.00

5114A: Ball bearings, black rubber sealed (5x8x2.5mm) (2)

$3.00

5115A: Ball bearings, black rubber sealed (5x10x4mm) (2)

$3.50

5116A: Ball bearings, black rubber sealed (5x11x4mm) (2)

$3.50

5117A: Ball bearings, black rubber sealed (6x12x4mm) (2)

$4.00

5119A: Ball bearings, black rubber sealed (10x15x4mm) (2)

$7.00

5180A: Ball bearings, black rubber sealed (6x13x5mm) (2)

$4.00

5349: Rod ends, small, with hollow balls (6) (for Revo® steering linkage)

$4.00

5669: Servo horn (with built-in spring and hardware) (for Summit locking differential)

$3.50

6747: Gear, 11-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw

$3.50

7792: Ring gear, differential, 35-tooth (heavy duty) (use with #7790, #7791 11-tooth differential pinion gears)

$10.00

8011A: Body, Land Rover® Defender®, adventure orange (complete with ExoCage, inner fenders, fuel canisters, and jack)

$159.95

8011T: Body, Land Rover® Defender®, blue (painted)/ decals

$69.95

8011X: Body, Land Rover® Defender®, graphite silver (painted)/ decals

$69.95

8013: Grille, Land Rover® Defender®/ grille mount (3)/ headlight housing (2)/ lens (2)/ headlight mount (2) (fits #8011 series bodies)

$10.00

8014: Tail light housing (2)/ lens (2)/ decals (left & right) (fits #8011 series bodies)

$4.00

8015: Roof basket (requires #8216 ExoCage) (fits #8011 series bodies)

$12.00

8016: ExoCage (complete with assembly hardware; #8015 roof basket sold separately) (fits #8011 series bodies)

$20.00

8017: Fender flares, front & rear (2 each) (fits #8011 or #8211 series bodies)

$8.00

8018: Fenders, inner, front & rear (2 each)/ rock light covers (8)

$12.00

8019: Fender brace, inner, front & rear

$5.00

8020: Mirrors, side (left & right)/ snorkel/ mounting hardware (fits #8011 series bodies)

$5.00

8021: Spare tire mount/ mounting bracket/ screw pins (2)

$6.00

8022: Fuel canisters (red) (2)/ screw pin

$3.50

8022A: Fuel canisters (yellow) (2)/ screw pin

$3.50

8022R: Fuel canisters (blue) (2)/ screw pin

$3.50

8022T: Fuel canisters (black) (2)/ screw pin

$3.50

8022X: Fuel canisters (white) (2)/ screw pin

$3.50

8023: Jack (1)/ 2x8 BCS (1)

$3.00

8040: Springs, shock (GTS) (rear) (0.54 rate) (2)

$6.00

8041: Springs, shock (GTS) (front) (0.45 rate) (2)

$6.00

8042: Springs, shock (natural finish) (GTS) (0.22 rate, yellow stripe) (2)

$6.00

8043: Springs, shock (natural finish) (GTS) (0.30 rate, white stripe) (2)

$6.00

8044: Springs, shock (natural finish) (GTS) (0.39 rate, orange stripe) (2)

$6.00

8045: Springs, shock (natural finish) (GTS) (0.61 rate, blue stripe) (2)

$6.00

8052: Spur gear, 39-tooth (32-pitch)

$3.00

8053: Spur gear, 45-tooth (32-pitch)

$3.00

8061: Axle shaft, rear, heavy duty (left & right)/ portal drive input gear, rear (machined) (2) (assembled)

$39.95

8063: Axle shaft, rear, heavy duty (left & right) (requires #8065 rear portal drive input gear)

$16.95

8065: Portal drive input gear, rear (machined) (left or right) (requires #8063 rear axle)

$11.95

8215: Body mounts & posts, front & rear (complete set)

$8.00

8216: Shock towers, front & rear (left & right)

$8.00

8218: Floor pans, left & right

$8.00

8219: Rock sliders, left & right

$6.50

8220: Chassis rails, 448mm (steel) (left & right)

$35.00

8224: Box, receiver (sealed)/ wire cover/ foam pads/ silicone grease/ 3x8 BCS (5)/ 2.5x8 CS (2)

$12.00

8224X: Receiver box cover (for use only with #8224 receiver box & #2260 BEC)/ foam pads/ seals/ silicone grease

$12.00

8225: Seal kit, receiver box (includes o-ring, seals, and silicone grease)

$4.00

8226: Tray, battery

$6.00

8227: Axle mount set (complete) (front & rear) (for suspension links)

$4.00

8230: Axle shaft, rear (left)

$6.00

8231: Axle shaft, rear (right)

$6.00

8234: Bumper D-Rings, grey (front or rear)/ 2.0x12 CS (4)

$3.00

8235: Bumper, front/ winch/ 2.6x8 BCS (1)

$8.00

8236: Bumper, rear

$6.00

8237: Bumper mounts, front & rear/ screw pins (4)

$7.00

8238: Skidplate/ lower gear cover

$8.00

8239: Servo mount, steering/ chassis crossmember

$6.00

8240X: Servo mount, 2-speed/ servo mount, T-Lock/ wire clips

$6.00

8242: Axle housing, intermediate (TRX-6™) or rear (TRX-4®)

$10.00

8245: Suspension link, rear, 5x121mm (upper or lower) (steel) (2)

$7.00

8246: Steering link, 5x60mm (1)/ draglink, 5x117mm (1) (steel)

$7.00

8247X: Servo horn, steering, metal/ 3x14 BCS (1)

$6.00

8250: Half shafts, center (internal splined, front (2) & internal splined, rear (2)/ external splined (2)/ pin retainer (4)) (plastic parts only)

$8.00

8251: Portal drive housing, outer (front or rear) (2)

$4.00

8251A: Portal housings, outer, 6061-T6 aluminum (charcoal gray-anodized) (2)/ 2.5x10 CS (12)

$39.95

8251G: Portal housings, outer, 6061-T6 aluminum (green-anodized) (2)/ 2.5x10 CS (12)

$39.95

8251R: Portal housings, outer, 6061-T6 aluminum (red-anodized) (2)/ 2.5x10 CS (12)

$39.95

8251X: Portal housings, outer, 6061-T6 aluminum (blue-anodized) (2)/ 2.5x10 CS (12)

$39.95

8253: Portal drive housing, inner, rear (left or right) (2)

$4.00

8253A: Portal housings, inner (rear), 6061-T6 aluminum (charcoal gray-anodized) (2)/ 2.5x10 CS (2)

$44.95

8254: Rebuild kit, slipper clutch (steel disc (2)/ friction insert (2)/ 4.0mm NL (1)/ spring washers (2))

$12.00

8255: Stub axle (portal drive) (2)

$6.00

8256: Portal drive axle mount, rear (left & right)

$5.00

8256A: Portal drive axle mount, rear, 6061-T6 aluminum (charcoal gray-anodized) (left and right)/ 2.5x16 CS (4)

$49.95

8256R: Portal drive axle mount, rear, 6061-T6 aluminum (red-anodized) (left and right)/ 2.5x16 CS (4)

$49.95

8256X: Portal drive axle mount, rear, 6061-T6 aluminum (blue-anodized) (left and right)/ 2.5x16 CS (4)

$49.95

8258: Portal drive output gear, front or rear

$5.00

8259: Portal drive input gear, rear

$6.50

8260: Shocks, GTS, silver aluminum (assembled with spring retainers) (2)

$39.95

8260A: Shocks, GTS, blue-anodized (assembled with spring retainers) (2)

$39.95

8260G: Shocks, GTS, green-anodized (assembled with spring retainers) (2)

$39.95

8260R: Shocks, GTS, red-anodized (assembled with spring retainers) (2)

$39.95

8260X: Shocks, GTS hard-anodized, PTFE-coated aluminum bodies with TiN shafts (assembled with spring retainers) (2)

$49.95

8262: Rebuild kit, TRX-4® shocks (x-rings, o-rings, pistons, bushings, e clips, rod ends, and travel limiters)

$5.00

8263: Shock shaft, 3x47mm (GTS) (2)

$4.00

8263T: Shock shaft, 3x47mm (GTS) (titanium nitride-coated) (2)

$10.00

8264: Caps & spring retainers, GTS shocks (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2))

$5.00

8266: Body, GTS shock (aluminum, silver-anodized) (1)

$12.00

8266X: Body, GTS shock (hard-anodized, PTFE-coated aluminum) (1)

$15.00

8269: Wheel hubs, 12mm hex (2)/ stub axle pins (2) (steel)

$5.00

8269A: Wheel hubs, 12mm hex, 6061-T6 aluminum (charcoal gray-anodized) (4)/ 3x10 screw pin (4)

$19.95

8269G: Wheel hubs, 12mm hex, 6061-T6 aluminum (green-anodized) (4)/ 3x10 screw pin (4)

$19.95

8269R: Wheel hubs, 12mm hex, 6061-T6 aluminum (red-anodized) (4)/ 3x10 screw pin (4)

$19.95

8269X: Wheel hubs, 12mm hex, 6061-T6 aluminum (blue-anodized) (4)/ 3x10 screw pin (4)

$19.95

8270: Tires, Canyon Trail 4.6x1.9" (S1 compound)/ foam inserts (2)

$24.00

8271: Wheels, TRX-4® 1.9 (2)

$8.00

8271X: Wheels, TRX-4® 1.9 (satin beadlock) (2)

$11.00

8272: Tires & wheels, assembled, glued (TRX-4® 1.9" wheels, Canyon Trail 4.6x1.9" tires) (2)

$36.00

8272X: Tires & wheels, assembled, glued (TRX-4® 1.9" satin beadlock wheels, Canyon Trail 4.6x1.9" tires) (2)

$39.00

8274: Hollow ball set, complete, TRX-4® (aluminum, PTFE-coated)

$39.95

8275: Rod end set, complete (standard (10), angled 10-degrees (8), offset (4))

$15.00

8276: Rod ends (10)

$7.00

8277: Rod ends, angled 10-degrees (8)

$5.00

8278: Rod ends, offset (4)

$4.00

8279: Ring gear, differential/ pinion gear, differential

$15.00

8279R: Ring gear, differential/ pinion gear, differential (machined)

$39.95

8280: Differential cover, front or rear (grey)

$4.00

8280X: Differential cover, front or rear (chrome plated)

$5.00

8283: Cable, T-lock (front)

$12.00

8284: Cable, T-lock (rear)

$12.00

8285: Gears, transfer case (3)

$10.00

8286: Output shafts (transfer case), front & rear

$6.00

8288: Ring gear, differential/ pinion gear, differential (underdrive, machined)

$39.95

8289: Drive hub, 2-speed/ shift dog/ shift fork/ 2-speed linkage

$10.00

8290: Plate, motor/ upper spur gear cover

$3.00

8290A: Motor mount plate, 6061-T6 aluminum (charcoal gray-anodized)

$24.95

8290G: Motor mount plate, 6061-T6 aluminum (green-anodized)

$24.95

8290R: Motor mount plate, 6061-T6 aluminum (red-anodized)

$24.95

8290X: Motor mount plate, 6061-T6 aluminum (blue-anodized)

$24.95

8291: Gearbox housing (includes main housing, front housing, & cover)

$12.00

8292: Input shaft/ output shaft (transmission)

$12.00

8293X: Gear set, transmission, metal (includes 18T, 30T input gears, 36T output gear, 2x9.8 pins (5))

$6.50

8294: Output gear, high range, 24T (metal)

$14.00

8295: Output drive, transmission or differential (pin retainer (1)/ drive cup (1)/ drive ball (1)/ drive pin (1)/ 3x10 screw pin (1)/ cross pin (black) (1) 3x6 BCS with threadlock (1))

$15.00

8327: Battery hold-down/ battery clip/ hold-down post/screw pin (for 256mm wheelbase)

$6.50

8347: Nuts, 4mm flanged nylon locking, serrated (black) (10)

$4.00

TRX-4 Scale and Trail Crawler (82056-4) Chassis Assembly Exploded View

TRX-4 Scale and Trail Crawler (82056-4) Body Assembly Exploded View

TRX-4 Scale and Trail Crawler (82056-4) Chassis Assembly Exploded View

TRX-4 Scale and Trail Crawler (82056-4) Front Assembly Exploded View

TRX-4 Scale and Trail Crawler (82056-4) Modular Assembly Exploded View

TRX-4 Scale and Trail Crawler (82056-4) Rear Assembly Exploded View

TRX-4 Scale and Trail Crawler (82056-4) Transmission Assembly Exploded View

View PDF

Enter your email address to Subscribe.