1552: 3x8mm Hex Cap Screws (6)/ Washers (6)/ Wrench (1)

1985: PTFE-coated Washers, 5x8x0.5mm (20) (use with ball bearings)

2065A: Servo, sub-micro, waterproof

2065R: Servo, sub-micro, waterproof, metal gear

2575: Screws, 3x6mm button-head machine (hex drive) (6)

2576: Screws, 3x8mm button-head machine (hex drive) (6)

2577: Screws, 3x10mm button-head machine (hex drive) (6)

2579: Screws, 3x15mm button-head machine (hex drive) (6)

2591: Screws, 3x23mm button-head machine (hex drive) (6)

2616: Screws, 3x27mm button-head machine (hex drive) (6)

3215: Screws, 2.5x6mm cap-head machine (hex drive) (6)

3965: Screws, 2.5x8mm cap-head machine (6)

3975R: Motor, Titan 550, reverse rotation (21-turns/ 14 volts) (1)

5114A: Ball bearings, black rubber sealed (5x8x2.5mm) (2)

5115A: Ball bearings, black rubber sealed (5x10x4mm) (2)

5116A: Ball bearings, black rubber sealed (5x11x4mm) (2)

5349: Rod ends, small, with hollow balls (6) (for Revo® steering linkage)

5669: Servo horn (with built-in spring and hardware) (for Summit locking differential)

6643: Screws, 1.6x5mm button-head machine (hex drive) (6)

6746: Gear, 10-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw

7792: Ring gear, differential, 35-tooth (heavy duty) (use with #7790, #7791 11-tooth differential pinion gears)

8052: Spur gear, 39-tooth (32-pitch)

8053: Spur gear, 45-tooth (32-pitch)

8150: Driveshaft extension kit, center (includes internal splined, x-long (2), internal splined, long (1) and internal splined, medium (1)) (for use with TRX-4® Long Arm Lift Kit)

8164: Center caps, wheel (chrome) (4)/ decal sheet (requires #8255A extended thread stub axle)

8164X: Center caps, wheel (chrome) (front (2), rear (2)) (requires #8255A extended stub axle)

8170: Tires, Canyon Trail 5.3x2.2"/ foam inserts (2)

8184: Tires & wheels, assembled, glued (2.2" classic chrome wheels, Canyon Trail 5.3x2.2" tires, foam inserts) (2)/ center caps (front (2), rear (2)) (requires #8255A extended thread stub axle)

8238: Skidplate/ lower gear cover

8240X: Servo mount, 2-speed/ servo mount, T-Lock/ wire clips

8250: Half shafts, center (internal splined, front (2) & internal splined, rear (2)/ external splined (2)/ pin retainer (4)) (plastic parts only)

8254: Rebuild kit, slipper clutch (steel disc (2)/ friction insert (2)/ 4.0mm NL (1)/ spring washers (2))

8274: Hollow ball set, complete, TRX-4® (aluminum, PTFE-coated)

8275: Rod end set, complete (standard (10), angled 10-degrees (8), offset (4))

8276: Rod ends (10)

8277: Rod ends, angled 10-degrees (8)

8278: Rod ends, offset (4)

8283: Cable, T-lock (front)

8284: Cable, T-lock (rear)

8285: Gears, transfer case (3)

8286: Output shafts (transfer case), front & rear

8289: Drive hub, 2-speed/ shift dog/ shift fork/ 2-speed linkage

8290: Plate, motor/ upper spur gear cover

8290A: Motor mount plate, 6061-T6 aluminum (charcoal gray-anodized)

8290G: Motor mount plate, 6061-T6 aluminum (green-anodized)

8290R: Motor mount plate, 6061-T6 aluminum (red-anodized)

8290X: Motor mount plate, 6061-T6 aluminum (blue-anodized)

8291: Gearbox housing (includes main housing, front housing, & cover)

8292: Input shaft/ output shaft (transmission)

8293X: Gear set, transmission, metal (includes 18T, 30T input gears, 36T output gear, 2x9.8 pins (5))

8294: Output gear, high range, 24T (metal)

8295: Output drive, transmission or differential (pin retainer (1)/ drive cup (1)/ drive ball (1)/ drive pin (1)/ 3x10 screw pin (1)/ cross pin (black) (1) 3x6 BCS with threadlock (1))

8347: Nuts, 4mm flanged nylon locking, serrated (black) (10)

9115: Door handles, left, right, and rear/ retainers (3)/ windshield wipers, left & right/ retainer (1)/ fuel cap/ fuel flange/ fuel cap mount/ 1.6x5 BCS (self-tapping) (7)/ 2.6x8 BCS (1)

9116: Marker light housing (4)/ marker light mount (4)/ marker light lens (red (2), amber (2))/ reverse lens (left & right)/ 1.6x5 BCS (self-tapping) (8)

9117: Side trim, Chevrolet Blazer (1972), left & right/ rear trim, upper & lower/ retainers, left, right & rear/ 2.6x8 BCS (23)/ 1.6x5 BCS (self-tapping) (5) (fits #9111 body)

9118: Mirrors, side, chrome (left & right)/ o-rings (4)/ body clips (4) (fits #9111 body)

9119: Tail light housing, chrome (2)/ lens (2)/ retainers (left & right)/ 2.6x8 BCS (self-tapping) (4)

9120: Grille, Chevrolet Blazer (1972)/ grille retainers (5)/ headlight housing (2)/ lens (2)/ 2.6x8 BCS (5)/ 2.5x6 BCS (4) (fits #9111 body)

9128: Body cage/ body mounts (front & rear)/ body mount latch (2)/ 3x8mm BCS (15) (fits #9111 or 9112 bodies)

9130: Body, Chevrolet Blazer (1972) (clear, requires painting)/ decals/ window masks (includes grille, side mirrors, door handles, windshield wipers, clipless mounting, hardware) (requires #8072X inner fenders)

9130-BLUE: Body, Chevrolet Blazer (1972), complete, blue (painted) (includes grille, side mirrors, door handles, windshield wipers, front & rear bumpers, clipless mounting) (requires #8072X inner fenders)

9130-BLWT: Body, Chevrolet Blazer (1972), complete, blue & white (painted) (includes grille, side mirrors, door handles, windshield wipers, front & rear bumpers, clipless mounting) (requires #8072X inner fenders)

9130-RED: Body, Chevrolet Blazer (1972), complete, red (painted) (includes grille, side mirrors, door handles, windshield wipers, front & rear bumpers, clipless mounting) (requires #8072X inner fenders)