TRX-4 1972 Chevrolet K5 Blazer High Trail Edition (92086-4) Rear Assembly Exploded View

1552: 3x8mm Hex Cap Screws (6)/ Washers (6)/ Wrench (1)

$3.00

1985: PTFE-coated Washers, 5x8x0.5mm (20) (use with ball bearings)

$2.00

2065A: Servo, sub-micro, waterproof

$29.95

2065R: Servo, sub-micro, waterproof, metal gear

$44.95

2523: Screws, 2.5x10 countersunk machine (hex drive) (6)

$2.50

2575: Screws, 3x6mm button-head machine (hex drive) (6)

$2.50

2576: Screws, 3x8mm button-head machine (hex drive) (6)

$2.50

2577: Screws, 3x10mm button-head machine (hex drive) (6)

$2.50

2579: Screws, 3x15mm button-head machine (hex drive) (6)

$2.50

2582: Screws, 3x30mm button-head machine (hex drive) (6)

$2.50

2591: Screws, 3x23mm button-head machine (hex drive) (6)

$2.50

2616: Screws, 3x27mm button-head machine (hex drive) (6)

$2.00

2618: Screws, 2.5x16mm cap-head machine (6)

$2.00

3215: Screws, 2.5x6mm cap-head machine (hex drive) (6)

$2.00

3229: Screws, 2.5x10mm cap-head machine (hex drive) (6)

$2.50

3965: Screws, 2.5x8mm cap-head machine (6)

$2.50

3975R: Motor, Titan 550, reverse rotation (21-turns/ 14 volts) (1)

$19.95

5104A: Ball bearings, black rubber sealed (4x10x4mm) (2)

$4.00

5114A: Ball bearings, black rubber sealed (5x8x2.5mm) (2)

$3.00

5115A: Ball bearings, black rubber sealed (5x10x4mm) (2)

$3.50

5116A: Ball bearings, black rubber sealed (5x11x4mm) (2)

$3.50

5117A: Ball bearings, black rubber sealed (6x12x4mm) (2)

$4.00

5119A: Ball bearings, black rubber sealed (10x15x4mm) (2)

$7.00

5180A: Ball bearings, black rubber sealed (6x13x5mm) (2)

$4.00

5349: Rod ends, small, with hollow balls (6) (for Revo® steering linkage)

$4.00

5669: Servo horn (with built-in spring and hardware) (for Summit locking differential)

$3.50

6643: Screws, 1.6x5mm button-head machine (hex drive) (6)

$1.50

6746: Gear, 10-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw

$3.50

7792: Ring gear, differential, 35-tooth (heavy duty) (use with #7790, #7791 11-tooth differential pinion gears)

$10.00

8052: Spur gear, 39-tooth (32-pitch)

$3.00

8053: Spur gear, 45-tooth (32-pitch)

$3.00

8061: Axle shaft, rear, heavy duty (left & right)/ portal drive input gear, rear (machined) (2) (assembled)

$39.95

8063: Axle shaft, rear, heavy duty (left & right) (requires #8065 rear portal drive input gear)

$16.95

8065: Portal drive input gear, rear (machined) (left or right) (requires #8063 rear axle)

$11.95

8142: Suspension links, rear upper (2) (5x115mm, steel) (assembled with hollow balls) (for use with #8140 TRX-4® Long Arm Lift Kit)

$10.00

8142R: Suspension links, rear upper, red (2) (5x115mm, powder coated steel) (assembled with hollow balls) (for use with #8140R TRX-4® Long Arm Lift Kit)

$17.00

8145: Suspension links, rear lower (2) (5x115mm, steel) (assembled with hollow balls) (for use with #8140 TRX-4® Long Arm Lift Kit)

$10.00

8145R: Suspension links, rear lower, red (2) (5x115mm, powder coated steel) (assembled with hollow balls) (for use with #8140R TRX-4® Long Arm Lift Kit)

$17.00

8145X: Suspension links, rear lower, blue (2) (5x115mm, powder coated steel) (assembled with hollow balls) (for use with #8140X TRX-4® Long Arm Lift Kit)

$17.00

8148: Cable, T-lock, extra long (193mm) (for use with TRX-4® Long Arm Lift Kit)

$12.00

8150: Driveshaft extension kit, center (includes internal splined, x-long (2), internal splined, long (1) and internal splined, medium (1)) (for use with TRX-4® Long Arm Lift Kit)

$4.00

8155: Springs, shock, long (natural finish) (GTS) (0.47 rate) (included with TRX-4® Long Arm Lift Kit)

$6.00

8156: Springs, shock, long (natural finish) (GTS) (0.54 rate, green stripe) (for use with TRX-4® Long Arm Lift Kit)

$6.00

8157: Springs, shock, long (natural finish) (GTS) (0.62 rate, blue stripe) (for use with TRX-4® Long Arm Lift Kit)

$6.00

8160: Shocks, GTS, silver aluminum (assembled without springs) (4) (for use with #8140 TRX-4® Long Arm Lift Kit)

$89.95

8160R: Shocks, GTS, aluminum (red-anodized) (assembled without springs) (4) (for use with #8140R TRX-4® Long Arm Lift Kit)

$89.95

8160X: Shocks, GTS, aluminum (blue-anodized) (assembled without springs) (4) (for use with #8140X TRX-4® Long Arm Lift Kit)

$89.95

8161: Shock shaft, 3x57mm (GTS) (2) (includes bump stops) (for use with TRX-4® Long Arm Lift Kit)

$5.00

8162: Body, GTS shock, long (silver aluminum) (1) (for use with #8140 TRX-4® Long Arm Lift Kit)

$14.00

8162R: Body, GTS shock, long (aluminum, red-anodized) (1) (for use with #8140R TRX-4® Long Arm Lift Kit)

$14.00

8164: Center caps, wheel (chrome) (4)/ decal sheet (requires #8255A extended thread stub axle)

$10.00

8164X: Center caps, wheel (chrome) (front (2), rear (2)) (requires #8255A extended stub axle)

$12.00

8170: Tires, Canyon Trail 5.3x2.2"/ foam inserts (2)

$28.00

8184: Tires & wheels, assembled, glued (2.2" classic chrome wheels, Canyon Trail 5.3x2.2" tires, foam inserts) (2)/ center caps (front (2), rear (2)) (requires #8255A extended thread stub axle)

$49.95

8227: Axle mount set (complete) (front & rear) (for suspension links)

$4.00

8230: Axle shaft, rear (left)

$6.00

8231: Axle shaft, rear (right)

$6.00

8238: Skidplate/ lower gear cover

$8.00

8240X: Servo mount, 2-speed/ servo mount, T-Lock/ wire clips

$6.00

8242: Axle housing, intermediate (TRX-6™) or rear (TRX-4®)

$10.00

8250: Half shafts, center (internal splined, front (2) & internal splined, rear (2)/ external splined (2)/ pin retainer (4)) (plastic parts only)

$8.00

8251: Portal drive housing, outer (front or rear) (2)

$4.00

8251A: Portal housings, outer, 6061-T6 aluminum (charcoal gray-anodized) (2)/ 2.5x10 CS (12)

$39.95

8251G: Portal housings, outer, 6061-T6 aluminum (green-anodized) (2)/ 2.5x10 CS (12)

$39.95

8251R: Portal housings, outer, 6061-T6 aluminum (red-anodized) (2)/ 2.5x10 CS (12)

$39.95

8251X: Portal housings, outer, 6061-T6 aluminum (blue-anodized) (2)/ 2.5x10 CS (12)

$39.95

8253: Portal drive housing, inner, rear (left or right) (2)

$4.00

8253A: Portal housings, inner (rear), 6061-T6 aluminum (charcoal gray-anodized) (2)/ 2.5x10 CS (2)

$44.95

8254: Rebuild kit, slipper clutch (steel disc (2)/ friction insert (2)/ 4.0mm NL (1)/ spring washers (2))

$12.00

8255A: Stub axle, extended thread (portal drive) (2)

$6.50

8256: Portal drive axle mount, rear (left & right)

$5.00

8256A: Portal drive axle mount, rear, 6061-T6 aluminum (charcoal gray-anodized) (left and right)/ 2.5x16 CS (4)

$49.95

8256R: Portal drive axle mount, rear, 6061-T6 aluminum (red-anodized) (left and right)/ 2.5x16 CS (4)

$49.95

8256X: Portal drive axle mount, rear, 6061-T6 aluminum (blue-anodized) (left and right)/ 2.5x16 CS (4)

$49.95

8258: Portal drive output gear, front or rear

$5.00

8259: Portal drive input gear, rear

$6.50

8262: Rebuild kit, TRX-4® shocks (x-rings, o-rings, pistons, bushings, e clips, rod ends, and travel limiters)

$5.00

8264: Caps & spring retainers, GTS shocks (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2))

$5.00

8269: Wheel hubs, 12mm hex (2)/ stub axle pins (2) (steel)

$5.00

8269A: Wheel hubs, 12mm hex, 6061-T6 aluminum (charcoal gray-anodized) (4)/ 3x10 screw pin (4)

$19.95

8269G: Wheel hubs, 12mm hex, 6061-T6 aluminum (green-anodized) (4)/ 3x10 screw pin (4)

$19.95

8269R: Wheel hubs, 12mm hex, 6061-T6 aluminum (red-anodized) (4)/ 3x10 screw pin (4)

$19.95

8269X: Wheel hubs, 12mm hex, 6061-T6 aluminum (blue-anodized) (4)/ 3x10 screw pin (4)

$19.95

8274: Hollow ball set, complete, TRX-4® (aluminum, PTFE-coated)

$39.95

8275: Rod end set, complete (standard (10), angled 10-degrees (8), offset (4))

$15.00

8276: Rod ends (10)

$7.00

8277: Rod ends, angled 10-degrees (8)

$5.00

8278: Rod ends, offset (4)

$4.00

8279: Ring gear, differential/ pinion gear, differential

$15.00

8279R: Ring gear, differential/ pinion gear, differential (machined)

$39.95

8280: Differential cover, front or rear (grey)

$4.00

8280A: Differential cover, front or rear (black)

$4.00

8280R: Differential cover, front or rear (red)

$4.00

8280X: Differential cover, front or rear (chrome plated)

$5.00

8283: Cable, T-lock (front)

$12.00

8284: Cable, T-lock (rear)

$12.00

8285: Gears, transfer case (3)

$10.00

8286: Output shafts (transfer case), front & rear

$6.00

8288: Ring gear, differential/ pinion gear, differential (underdrive, machined)

$39.95

8289: Drive hub, 2-speed/ shift dog/ shift fork/ 2-speed linkage

$10.00

8290: Plate, motor/ upper spur gear cover

$3.00

8290A: Motor mount plate, 6061-T6 aluminum (charcoal gray-anodized)

$24.95

8290G: Motor mount plate, 6061-T6 aluminum (green-anodized)

$24.95

8290R: Motor mount plate, 6061-T6 aluminum (red-anodized)

$24.95

8290X: Motor mount plate, 6061-T6 aluminum (blue-anodized)

$24.95

8291: Gearbox housing (includes main housing, front housing, & cover)

$12.00

8292: Input shaft/ output shaft (transmission)

$12.00

8293X: Gear set, transmission, metal (includes 18T, 30T input gears, 36T output gear, 2x9.8 pins (5))

$6.50

8294: Output gear, high range, 24T (metal)

$14.00

8295: Output drive, transmission or differential (pin retainer (1)/ drive cup (1)/ drive ball (1)/ drive pin (1)/ 3x10 screw pin (1)/ cross pin (black) (1) 3x6 BCS with threadlock (1))

$15.00

8347: Nuts, 4mm flanged nylon locking, serrated (black) (10)

$4.00

9115: Door handles, left, right, and rear/ retainers (3)/ windshield wipers, left & right/ retainer (1)/ fuel cap/ fuel flange/ fuel cap mount/ 1.6x5 BCS (self-tapping) (7)/ 2.6x8 BCS (1)

$10.00

9116: Marker light housing (4)/ marker light mount (4)/ marker light lens (red (2), amber (2))/ reverse lens (left & right)/ 1.6x5 BCS (self-tapping) (8)

$8.00

9117: Side trim, Chevrolet Blazer (1972), left & right/ rear trim, upper & lower/ retainers, left, right & rear/ 2.6x8 BCS (23)/ 1.6x5 BCS (self-tapping) (5) (fits #9111 body)

$25.00

9118: Mirrors, side, chrome (left & right)/ o-rings (4)/ body clips (4) (fits #9111 body)

$7.00

9119: Tail light housing, chrome (2)/ lens (2)/ retainers (left & right)/ 2.6x8 BCS (self-tapping) (4)

$10.00

9120: Grille, Chevrolet Blazer (1972)/ grille retainers (5)/ headlight housing (2)/ lens (2)/ 2.6x8 BCS (5)/ 2.5x6 BCS (4) (fits #9111 body)

$15.00

9128: Body cage/ body mounts (front & rear)/ body mount latch (2)/ 3x8mm BCS (15) (fits #9111 or 9112 bodies)

$20.00

9130: Body, Chevrolet Blazer (1972) (clear, requires painting)/ decals/ window masks (includes grille, side mirrors, door handles, windshield wipers, clipless mounting, hardware) (requires #8072X inner fenders)

$139.95

9130-BLUE: Body, Chevrolet Blazer (1972), complete, blue (painted) (includes grille, side mirrors, door handles, windshield wipers, front & rear bumpers, clipless mounting) (requires #8072X inner fenders)

$159.95

9130-BLWT: Body, Chevrolet Blazer (1972), complete, blue & white (painted) (includes grille, side mirrors, door handles, windshield wipers, front & rear bumpers, clipless mounting) (requires #8072X inner fenders)

$199.95

9130-RED: Body, Chevrolet Blazer (1972), complete, red (painted) (includes grille, side mirrors, door handles, windshield wipers, front & rear bumpers, clipless mounting) (requires #8072X inner fenders)

$159.95

TRX-4 1972 Chevrolet K5 Blazer High Trail Edition (92086-4) Rear Assembly Exploded View

TRX-4 1972 Chevrolet K5 Blazer High Trail Edition (92086-4) Body Assembly Exploded View

TRX-4 1972 Chevrolet K5 Blazer High Trail Edition (92086-4) Body Cage Assembly Exploded View

TRX-4 1972 Chevrolet K5 Blazer High Trail Edition (92086-4) Chassis Assembly Exploded View

TRX-4 1972 Chevrolet K5 Blazer High Trail Edition (92086-4) Front Assembly Exploded View

TRX-4 1972 Chevrolet K5 Blazer High Trail Edition (92086-4) Modular Assembly Exploded View

TRX-4 1972 Chevrolet K5 Blazer High Trail Edition (92086-4) Rear Assembly Exploded View

TRX-4 1972 Chevrolet K5 Blazer High Trail Edition (92086-4) Transmission Assembly Exploded View

View PDF

Enter your email address to Subscribe.