Summit (56076-4) Rear Assembly Exploded View

1552: 3x8mm Hex Cap Screws (6)/ Washers (6)/ Wrench (1)

$3.00

1747: Nuts, 4mm nylon locking (10)

$2.00

2065A: Servo, sub-micro, waterproof

$27.95

2065R: Servo, sub-micro, waterproof, metal gear

$44.95

2535: Screws, 4x10mm countersunk machine (hex drive) (6)

$2.50

2552: Screws, 3x12mm countersunk machine (6) (hex drive)

$2.50

2554: Screws, 3x6mm caphead machine (hex drive) (6)

$2.50

2557: Screws, 3x30mm cap-head machine (hex drive) (6)

$2.50

2562: Screws, 2.6x8mm roundhead machine (6)

$1.50

2575: Screws, 3x6mm button-head machine (hex drive) (6)

$2.50

2576: Screws, 3x8mm button-head machine (hex drive) (6)

$2.50

2577: Screws, 3x10mm button-head machine (hex drive) (6)

$2.50

2577X: Screws, 3x10 button-head machine (hex drive) (stainless steel) (6)

$3.00

2579: Screws, 3x15mm button-head machine (hex drive) (6)

$2.50

2580: Screws, 3x20mm button-head machine (hex drive) (6)

$2.50

2581: Screws, 3x25mm button-head machine (hex drive) (6)

$2.50

2582: Screws, 3x30mm button-head machine (hex drive) (6)

$2.50

2587: Screws, 3x10mm caphead machine (6) (no washer)

$2.50

3215: Screws, 2.5x6mm cap-head machine (hex drive) (6)

$2.00

3236: Screws, 2.5x12mm cap-head machine (6)

$2.50

3932: Screws, 3x6mm flat-head machine (hex drive) (6)

$2.50

3936: Screws, 4x10mm button-head machine (hex drive) (6)

$2.50

3937: Screws, 4x12mm button-head machine (hex drive) (6)

$2.50

3938: Screws, 4x14mm button-head machine (hex drive) (6)

$2.50

3939: Screws, 4x6mm button-head machine (hex drive) (with threadlock) (6)

$3.00

3959: Spur gear, 62-tooth (0.8 metric pitch, compatible with 32-pitch)

$3.00

3960: Spur gear, 65-tooth (0.8 metric pitch, compatible with 32-pitch)

$3.00

3961: Spur gear, 68-tooth (0.8 metric pitch, compatible with 32-pitch)

$3.00

3964: Screws, 3x32mm cap-head machine (hex drive) (6)

$2.50

3965: Screws, 2.5x8mm cap-head machine (6)

$2.50

3966: Shoulder screws, 3x10mm (6) (with threadlock)

$3.50

3969: Output shaft, transmission

$7.50

3973: Gear set, close ratio (1st speed gear 21T, 18T input gear)

$6.00

3974: Gear set, wide ratio (1st speed gear 26T, 13T input gear)

$6.00

3976: Idler gear, 13T (1st speed gear)

$6.00

3985X: Output gears, 33T (2)/ drive dog carrier/ output shaft spacer

$6.00

3989X: Shift fork/ shaft

$8.00

3991X: Gearbox halves (front & rear)/ shift detent ball/ spring/ 4mm GS/ shift shaft seal, glued/ 2.5x8mm CS (2)

$10.00

3992: Input shaft/ drive gear assembly (18-tooth steel top gear)

$10.00

3996X: Idler gear, 20-tooth/ idler gear shaft

$5.50

4933: Pivot balls (4)/ pivot ball cap bushings (4)

$6.00

4933X: Pivot balls, hard anodized 7075 T-6 aluminum (4)/ pivot ball cap (4)

$20.00

5114: Ball bearings, blue rubber shield (5x8x2.5mm) (2)

$4.00

5116: Ball bearings, blue rubber sealed (5x11x4mm) (2)

$3.50

5117: Ball bearings, blue rubber sealed (6x12x4mm) (2)

$4.00

5118: Ball bearings, blue rubber sealed (8x16x5mm) (2)

$6.00

5120: Ball bearings, blue rubber sealed (12x18x4mm) (2)

$8.00

5133: Spacer, pushrod (aluminum, red) (use with 5318 or 5318X pushrod and 5358 progressive 2 rockers) (8)

$5.00

5133A: Spacer, pushrod (aluminum, blue) (use with 5318 or 5318X pushrod and 5358 progressive 2 rockers) (8)

$5.00

5144: Screw pin, 2.5x18mm (6)

$1.50

5145: Screw pin, 4x15mm (6)

$3.50

5154: Driveshaft, steel constant-velocity, Revo®/E-Revo® (first generation)/T-Maxx®/E-Maxx (shaft only, 128.5mm)/ drive cup pin (1)

$10.00

5157: Cover plates and seals, forward only conversion (Revo®) (Optidrive® blank-out plate, Optidrive® sensor cover, shift fork cover)

$2.50

5180: Ball bearings, blue rubber sealed (6x13x5mm) (2)

$4.00

5182: Ball bearings, blue rubber sealed (20x27x4mm) (2)

$10.00

5189: Screw pins, 4x13mm (with threadlock) (4)

$3.50

5314: Body mounts, front & rear/ body mount posts, front & rear/ 2.5x18mm screw pins (4)/ 4x10mm BCS (1)

$11.00

5317: Shock mounts (front & rear)/ wire clip (1)/ chassis wire clips (4)/ 3x32mm CS (4)/ 3x6mm BCS (1)

$6.00

5318: Push rod (steel) (assembled with rod ends) (2) (use with long travel or #5357 progressive-1 rockers)

$7.00

5318X: Push rod (aluminum) (assembled with rod ends) (2) (use with long travel or #5357 progressive-1 rockers)

$12.50

5319: Push rod (steel) (assembled with rod ends) (2) (black) (use with #5359 progressive 3 rockers)

$7.00

5319X: Push rod (aluminum) (assembled with rod ends) (2) (red) (use with #5359 progressive 3 rockers)

$12.50

5321: Suspension pin set (front or rear, hardened steel), 3x20mm (4), 3x40mm (2)

$4.75

5323: Bulkhead tie bars, front & rear (blue anodized aluminum)

$9.50

5327: Suspension arms, adjustable wheelbase right side (upper arm (1)/ lower arm (1))

$7.50

5328: Suspension arms, adjustable wheelbase left side (upper arm (1)/ lower arm (1))

$7.50

5330: Bulkhead, front (L&R halves)/ diff retainer/ 4x14mm BCS (4)

$15.00

5333R: Suspension arm set, adjustable wheelbase (lengthens wheelbase 10mm or 19mm) (suspension arm upper (2)/ suspension arm lower (2)/ bumper mount spacers (2)/ 4x16BCS (2))

$16.00

5334: Axle carriers, left & right (1 each)

$8.00

5334R: Axle carriers, left & right (1 each) (use with larger 6x13mm ball bearings)/ bearing adapters (for 6x12mm ball bearings) (2)/ dust boot retainers (4)

$10.00

5336A: Bumper, rear (chrome)/ bumper mount, rear/ 4x10mm BCS (2)/ 3x25mm BCS (2)

$7.50

5337: Skid plate set, front (2 pieces, plastic)/ skid plate, rear (1 piece, plastic)

$8.00

5338: Toe link, 5.0mm steel (front or rear) (2)

$10.00

5338A: Toe links, Revo® (Tubes™ 7075-T6 aluminum, black) (128mm, fits front or rear) (2)/ rod ends, rear (4)/ rod ends, front (4)/ wrench (1)

$22.95

5338R: Toe links, Revo® (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (128mm, fits front or rear) (2)/ rod ends, rear (4)/ rod ends, front (4)/ aluminum wrench (1)

$25.00

5347: Rod ends, Revo® (large) with hollow balls (12)

$9.00

5348: Rod ends, Revo® (large, for rear toe link only) (4)

$2.00

5351: Slipper pressure plate and hub (alloy)

$8.00

5352R: Rebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))

$9.50

5352X: Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))

$7.50

5353: Wheel nuts, splined, 17mm (blue-anodized) (4)

$10.00

5353A: Wheel nuts, splined, 17mm (green-anodized) (4)

$10.00

5353G: Wheel hubs, splined, 17mm (green-anodized) (4)/ wheel nuts, splined, 17mm (green-anodized) (4)/ screw pins, 4x13mm (with threadlock) (4)

$21.95

5353R: Wheel hubs, splined, 17mm (red-anodized) (4)/ wheel nuts, splined, 17mm (red-anodized) (4)/ screw pins, 4x13mm (with threadlock) (4)

$21.95

5353X: Wheel hubs, splined, 17mm (blue-anodized) (4)/ wheel nuts, splined, 17mm (blue-anodized) (4)/ screw pins, 4x13mm (with threadlock) (4)

$21.95

5354: Rocker Arm Stud

$3.25

5354X: Rocker Arm Stud Aluminum

$12.50

5356: Rocker arm set, long travel (120-T) (use with #5318 or #5318X pushrod)

$8.00

5357: Rocker arm set, progressive-1 (90-T) (use with #5318 or #5318X pushrod)

$8.00

5358: Rocker arm set, progressive-2 (90-T)/ spacers (red aluminum) (8)

$11.00

5359: Rocker arm set, progressive-3 (90-T) (requires pushrods part #5319 or 5319X)

$8.00

5378X: Pivot ball caps (4)/ dust boots, rubber (4)/ dust plugs, rubber (4)/ dust boot retainers, black (4), blue (4) (2 pkgs. req. to complete truck)

$6.75

5379R: Ring gear, differential/ pinion gear, differential (machined, spiral cut) (front)

$39.95

5379X: Ring gear, differential/ pinion gear, differential

$15.00

5382X: Gear set, differential (output gears (2)/ spider gears (2)/ spider gear shaft/ diff carrier support)

$14.00

5452: U-joints, driveshaft (carrier (4)/ 4.5mm cross pin (4)/ 3mm cross pin (4)/ e-clips (20)) (metal parts for 2 driveshafts)

$10.00

5458X: Yokes, differential and transmission (2)/ 4x15mm screw pins (2)

$4.00

5460X: Shocks, GTR hard-anodized, PTFE-coated aluminum bodies with TiN shafts (fully assembled w/o springs) (4)

$69.95

5616: Body mount posts, front & rear (tall, for Summit)

$6.00

5617: Fender flares, front & rear (4)/ fender flare retainers, front & rear (4)/ 2.5x6mm CS (22)

$14.00

5618: ExoCage, cross braces/ 3x6mm BCS (12)

$8.00

5631: Bulkhead, rear (left & right halves)

$15.00

5634: Lightbar, front bumper (chrome) (1)/ roof (chrome) (1)

$6.75

5636: Bumper, rear/ bumper mount, rear/ 4x10mm BCS (2)/ 3x25mm BCS (2)

$7.50

5640: Gear, 14-T pinion (0.8 metric pitch, compatible with 32-pitch) (hardened steel) (fits 5mm shaft)/ set screw

$5.00

5650: Half shafts, center (internal splined (3)/ external splined (2)) (plastic parts only)

$6.00

5653: Differential CV output drive (machined steel) (1)/ screw pin (with threadlock) (1)/ cross pin (1)/ drive pin (1)/ set screw (1)

$10.00

5654: Stub axle, CV style (machined steel) (1)/ cross pin (1)/ drive pin (1)

$10.00

5655: Half shaft set, short (plastic parts only) (internal splined half shaft/ external splined half shaft/ rubber boot) (assembled with glued boot) (2 assemblies)

$8.00

5656: Half shaft set, long (plastic parts only) (internal splined half shaft/ external splined half shaft/ rubber boot) (assembled with glued boot) (2 assemblies)

$8.00

5657: Cross pin (4)/ drive pin (4)/ set screw (4) (to rebuild 2 driveshafts)

$10.00

5660: Motor mount, finned aluminum

$12.00

5661: Motor mount hinge post/ 4x12mm BCS (1)/ 4x10mm CS with split and flat washer (1)

$2.50

5665: Sidewall protector, beadlock-style (yellow) (2)/ 2.5x8mm CS (24)

$6.95

5666: Sidewall protector, beadlock-style (blue) (2)/ 2.5x8mm CS (24)

$7.00

5667: Sidewall protector, beadlock-style (red) (2)/ 2.5x8mm CS (24)

$6.95

5668: Linkage, shift (includes: ball collar, spring, ball cup, servo horn, linkage wire)/ shift servo mount/ 3x8mm BCS (2), 3x6 flat-head

$5.00

5669: Servo horn (with built-in spring and hardware) (for Summit locking differential)

$3.50

5670: Tires, Canyon AT 3.8" (2)/ foam inserts (2)

$34.95

5671: Wheels, Geode 3.8" (chrome) (2) (use with 17mm splined wheel hubs & nuts, part #5353X & beadlock-style sidewall protectors, part #5665, 5666, 5667)

$11.95

5673: Tires & wheels, assembled, glued (Geode chrome wheels, Canyon AT tires, foam inserts) (2) (use with 17mm splined wheel hubs & nuts, part #5353X & beadlock-style sidewall protectors #5665, #5666, #5667)

$44.95

5675: Motor, Titan® 775 (10-turn/16.8 volts) (1)

$40.95

5677R: Cover, gear/ 3x8mm CS (1) (for single motor installation, use with motor plate #5690X)

$3.50

5678: Gear, locking differential output/ differential slider/ 3x12mm screwpin

$12.00

5679: Linkage, locking differential (includes ball cup, linkage wires)/ bellcrank/ bellcrank mount/ 3x10mm SS

$7.50

5680: Housing, differential (front & rear)

$4.00

5681: Carrier, differential (heavy duty)/ differential fork/ linkage arms (front & rear)/x-ring gaskets (2)/ ring gear gasket/ bushings (2)/ 6.5x10x0.5 TW

$6.00

5684: LED Lightbar, (chrome, fits Summit roll cage)/ light harness (4 clear lights)/ harness adapter

$15.00

5687: LED lights, center harness, Summit (1)/ wire clip (1)

$6.00

5688: LED lights, rear harness (6 red lights), Summit (1)/ wire clip (1)

$10.00

5690X: Plate, motor (for single motor installation, use with gear cover #5677X)

$10.00

5691: Transmission, complete (fits Summit (2-speed))

$109.95

5692: Two Speed Conversion Kit (E-Revo®) (includes wide and close ratio first gear sets, sub-micro servo, and linkage) (requires 3 channel transmitter)

$55.00

Summit (56076-4) Rear Assembly Exploded View

Summit (56076-4) Chassis Assembly Exploded View

Summit (56076-4) Driveshafts Assembly Exploded View

Summit (56076-4) Front Assembly Exploded View

Summit (56076-4) Rear Assembly Exploded View

Summit (56076-4) Shift Assembly Exploded View

Summit (56076-4) Transmission Assembly Exploded View

View PDF

Enter your email address to Subscribe.