Skip to main content
Traxxas Logo Return to Home Page
Gift Cards   Cart   Wishlist   Subscribe   My Account
Receive Traxxas News

Enter your email address to Subscribe.

  • Model Showroom
  • Parts & Accessories
  • Batteries & Chargers
  • Community
  • Support
  • News
  • Apparel
FREE Winch or $50 off TRX-4 & TRX-6! Hit the trail and save this holiday season. Shop Now.
Give the Gift of Fun! The Traxxas Gift Guide has something for everyone on your list. Shop Now.
Corvette Combo Sale! Save up to $200 on 4-Tec 3.0 Corvette Stingray. Shop Now.
FREE standard shipping on all orders over $99! Discount automatically applied at checkout. Learn more >
1552: 3x8mm Hex Cap Screws (6)/ Washers (6)/ Wrench (1)
$3.00
1654: Wheel hubs, hex (2)/ stub axle pins (2)
$2.00
1654X: Wheel hubs, hex (blue-anodized, lightweight aluminum) (2)/ axle pins(2)
$9.00
1664: Shock shafts, steel, chrome finish (long) (2)
$3.00
1664T: Shock shafts, hardened steel, titanium nitride coated (long) (2)
$10.00
1726: Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)
$1.00
1747G: Nuts, aluminum, flanged, serrated (4mm) (green-anodized) (4)
$7.50
1747P: Nuts, 4mm flanged nylon locking (aluminum, pink anodized) (4)
$7.50
1747R: Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4)
$7.50
1765: Silicone diaphragms (4)
$2.00
1926: Antenna caps, vinyl (2)/ antenna spool
$2.00
1942: Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2)
$7.00
1952: Carriers, stub axle (rear) (2)
$3.00
1952A: Carriers, stub axle (red-anodized 6061-T6 aluminum) (rear) (left & right)/ 3x32mm hinge pins (2)/ e-clips (6)/ hardware
$25.95
1952G: Carriers, stub axle (green-anodized 6061-T6 aluminum) (rear) (left & right)/ 3x32mm hinge pins (2)/ e-clips (6)/ hardware
$25.95
1952T: Carriers, stub axle (orange-anodized 6061-T6 aluminum) (rear) (left & right)/ 3x32mm hinge pins (2)/ e-clips (6)/ hardware
$25.95
1952X: Carriers, stub axle (blue-anodized 6061-T6 aluminum) (rear) (left & right)/ 3x32mm hinge pins (2)/ e-clips (6)/ hardware
$25.95
1985: PTFE-coated Washers, 5x8x0.5mm (20) (use with ball bearings)
$2.00
2056: Servo, high-torque, waterproof (blue case)
$33.95
2335: Turnbuckles (72mm) (Tie rods or optional rear camber rods) (2)
$2.00
2362: Shock rebuild kit (for 2 shocks)
$2.50
2534: Screws, 3x6mm countersunk machine (6) (hex drive)
$2.50
2535: Screws, 4x10mm countersunk machine (hex drive) (6)
$2.50
2542: Screws, 4x12mm countersunk machine (hex drive) (6)
$2.50
2545: Bushings (plastic) (5x8x2.5mm) (4)
$3.00
2550: Screws, 3x8mm countersunk machine (6) (hex drive)
$2.50
2551: Screws, 3x10mm countersunk machine (6) (hex drive)
$2.50
2552: Screws, 3x12mm countersunk machine (6) (hex drive)
$2.50
2553: Screws, 3x15mm countersunk machine (6) (hex drive)
$2.50
2554: Screws, 3x6mm caphead machine (hex drive) (6)
$2.50
2575: Screws, 3x6mm button-head machine (hex drive) (6)
$2.50
2576: Screws, 3x8mm button-head machine (hex drive) (6)
$2.50
2577: Screws, 3x10mm button-head machine (hex drive) (6)
$2.50
2579: Screws, 3x15mm button-head machine (hex drive) (6)
$2.50
2580: Screws, 3x20mm button-head machine (hex drive) (6)
$2.50
2583: Screws, 3x18 button-head machine (hex drive) (6)
$2.50
2587: Screws, 3x10mm caphead machine (6) (no washer)
$2.50
2656: Shock shafts, steel, chrome finish (xx-long) (2)
$3.00
2656T: Shock shafts, hardened steel, titanium nitride coated (xx-long) (2)
$10.00
2669: Piston head set (2-hole (2)/ 3-hole (2))/ shock mounting bushings & washers (2) (Big Bore Shocks)
$2.50
2682: Screws, 3x8mm roundhead self-tapping (6)
$1.50
2742: Rod ends, long (6)/ hollow ball connectors (6)
$4.00
2742X: Rod ends, short (6)/ hollow balls (6)
$4.00
2743: Set (grub) screws, 3mm hardened (12)
$3.00
2745: Nuts, 3mm nylon locking (12)
$2.00
2746: Washers, 3x6mm metal (12)
$1.50
2754: Stub axle pins (4)
$1.00
3018R: XL-5 Electronic Speed Control, waterproof (land version, low-voltage detection, fwd/rev/brake)
$59.95
3628: Box, receiver (sealed)/ foam pad/2.5x8mm CS (4)/ 3x10mm CS (2)
$12.00
3629: Seal kit, receiver box (includes o-ring, seals, and silicone grease)
$4.00
3641: Camber link set (plastic/ non-adjustable) (front & rear) (black)
$3.00
3641A: Camber link set (plastic / non-adjustable ) ( front & rear) (gray)
$3.00
3642X: Shoulder screws, Ultra Shocks (3x12 hex drive) (6)
$3.00
3643G: Camber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than Titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
$34.95
3643R: Camber links, front (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
$34.95
3643X: Camber links, front (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
$34.95
3644G: Camber links, rear (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
$32.95
3644R: Camber links, rear (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
$32.95
3644X: Camber links, rear (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
$32.95
3647: Nuts, 4mm flanged nylon locking (steel, serrated) (8)
$3.25
3655X: Suspension arms, left & right
$10.00
3690: LED light bar, front (assembled)/ 3x8 BCS (2)/ 2.5x8 BCS (2) (requires front bumper #5835X for 2WD Slash®, #3635 for 2WD Stampede®, #3630 for 2WD Bigfoot® No. 1, #6835X for 4WD Slash®, or #6735 for 4WD Stampede®)
$22.00
3757P: Springs, pink (rear) (2)
$4.00
3757X: Springs, white (rear) (2)
$4.00
3758P: Springs, pink (front) (2)
$5.00
3758X: Springs, white (front) (2)
$4.00
3762A: Ultra Shocks (grey) (xx-long) (complete w/ spring pre-load spacers & springs) (rear) (2)
$18.00
3765A: Body, Ultra Shock (long) (grey) (2)
$3.00
3766A: Body, Ultra Shock (XXL) (grey) (2)
$3.00
3767: Shock caps (2)/ shock bottoms (2)
$3.00
3767A: Shock caps, aluminum (blue-anodized) (4) (fits all Ultra Shocks)
$14.00
3767G: Shock caps, aluminum (green-anodized) (4) (fits all Ultra Shocks)
$14.00
3767P: Shock caps, aluminum (pink-anodized) (4) (fits all Ultra Shocks)
$14.00
3767X: Shock caps, aluminum (red-anodized) (4) (fits all Ultra Shocks)
$14.00
3768: Spring retainers, upper & lower (2)/ piston head set (2-hole (2)/ 3-hole (2))
$3.00
3769: Spring pre-load spacers: 1mm (4)/ 2mm (2)/ 4mm (2)/ 8mm (2)
$4.00
3785: Motor, Titan® 12T (12-Turn, 550 size)
$25.95
3932: Screws, 3x6mm flat-head machine (hex drive) (6)
$2.50
3937: Screws, 4x12mm button-head machine (hex drive) (6)
$2.50
3956: Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch)
$3.00
3956R: Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differential)
$3.00
3965: Screws, 2.5x8mm cap-head machine (6)
$2.50
3967: Shoulder screws 3x10 (6) (without threadlock)
$3.50
5116: Ball bearings, blue rubber sealed (5x11x4mm) (2)
$3.50
5117: Ball bearings, blue rubber sealed (6x12x4mm) (2)
$4.00
5118: Ball bearings, blue rubber sealed (8x16x5mm) (2)
$6.00
5119: Ball bearings, blue rubber sealed (10x15x4mm) (2)
$7.00
5119A: Ball bearings, black rubber sealed (10x15x4mm) (2)
$7.00
5120: Ball bearings, blue rubber sealed (12x18x4mm) (2)
$8.00
5142: Screws, 3x15mm caphead machine (hex drive) (with split and flat washers) (6)
$2.75
5351: Slipper pressure plate and hub (alloy)
$8.00
5352X: Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))
$7.50
5381: Carrier, differential/ x-ring gaskets (2)/ ring gear gasket/ 6x10x0.5 TW
$4.25
5529: Shim set, 3x7x1mm (2), 3x6x0.5mm (4), 3x7x2mm (2)/ hollow balls, captured (4)
$3.50
5552X: Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/ pin/ 4.0mm NL (1)/ 5.0mm NL (1))
$10.00
5556: Slipper pressure plate & hub (aluminum alloy)
$8.00
5572: Wheels, Jato® twin-spoke 2.8" (chrome) (rear) (2)
$7.95
5576: Wheels, All-Star 2.8" (chrome) (nitro rear / electric front) (2)
$7.95
5576A: Wheels, All-Star 2.8" (black chrome) (nitro rear / electric front) (2)
$8.95
Ships Early December
6519: Receiver, micro, TQ 2.4GHz (3-channel)
$29.95
6715: Body mount (1)/ body mount post (2) (front)
$4.00
6722: Chassis, Stampede® 4x4
$18.00
6727: Hold down, battery (2)/ hold down retainer/ battery post/ angled body clip
$6.00
6727X: Hold down, battery/ hold down retainer/ battery post/ angled body clip (allows for installation of taller, multi-cell batteries)
$6.00
6732: Suspension arm guards, front (2)/ guard spacers (2)/ hollow balls (2)/ 3x18mm BCS (4)
$7.00
6733: Suspension arm guards, rear (2)/ guard spacers (2)/ hollow balls (2)/ 3x18mm BCS (4)
$7.00
6735: Bumper, front/ skidplate, front (black)
$7.50
6741: Cover, center driveshaft (clear)
$4.00
6742G: Toe links (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends (4) aluminum wrench (1)
$34.95
6742R: Toe links (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends (4) aluminum wrench (1)
$34.95
6742X: Toe links (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends (4) aluminum wrench (1)
$34.95
6745: Gear, 9-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw
$3.50
6770: Tires, Maxx® 2.8" (2)/ foam inserts (2)
$18.95
6771: Tires & wheels, assembled, glued 2.8" (All-Star chrome wheels, Maxx® tires, foam inserts) (2)
$29.95
6777X: Wheelie bar mounts/ rear skidplate (fits 4WD Stampede®) (for LED light kit installation)
$8.00
6778: Ring gear, differential/ pinion gear, differential (12/47 ratio) (front)
$15.00
6779: Ring gear, differential/ pinion gear, differential (12/47 ratio) (rear)
$15.00
6815R: Body mount (1)/ body mount post (2)/ body post extensions (2) (front or rear)
$4.00
6823: Bulkhead tie bars, front & rear, aluminum (blue-anodized)
$7.00
6828X: Differential output yokes, heavy duty (2)/ screw pin (2)
$4.00
6829: Bulkhead, rear
$6.00
6830X: Bulkhead, front
$6.00
6832A: Caster blocks (c-hubs), 6061-T6 aluminum (orange-anodized), left & right
$39.95
6832G: Caster blocks (c-hubs), 6061-T6 aluminum (green-anodized), left & right
$39.95
6832R: Caster blocks (c-hubs), 6061-T6 aluminum (red-anodized), left & right
$39.95
6832X: Caster blocks (c-hubs), 6061-T6 aluminum (blue-anodized), left & right
$39.95
6834: Suspension pin set, complete (front and rear)
$4.00
6837: Steering blocks, left & right
$5.00
6837A: Steering blocks, 6061-T6 aluminum (orange-anodized), left & right
$26.95
6837G: Steering blocks, 6061-T6 aluminum (green-anodized), left & right
$26.95
6837R: Steering blocks, 6061-T6 aluminum (red-anodized), left & right
$26.95
6837X: Steering blocks, 6061-T6 aluminum (blue-anodized), left & right
$26.95
6838: Shock tower, rear
$6.00
6839: Shock tower, front
$6.00
6842: Spur gear, 50-tooth (0.8 metric pitch, compatible with 32-pitch)
$3.00
6842R: Spur gear, 50-tooth (0.8 metric pitch, compatible with 32-pitch) (for Slash 4x4 center differential)
$3.00
6843: Spur gear, 52-tooth (0.8 metric pitch, compatible with 32-pitch)
$3.00
6843R: Spur gear, 52-tooth (0.8 metric pitch, compatible with 32-pitch) (for Slash 4x4 center differential)
$3.00
6845A: Drag link, machined 6061-T6 aluminum (blue-anodized)
$10.00
6845G: Drag link, machined 6061-T6 aluminum (green-anodized)
$10.00
6845R: Drag link, machined 6061-T6 aluminum (red-anodized)
$10.00
6845T: Drag link, machined 6061-T6 aluminum (orange-anodized)
$10.00
6845X: Steering bellcranks/ servo saver/ servo saver spring/ servo spring retainer/servo horn, steering
$12.00
6846: Linkage, steering (Revo) (3x20mm turnbuckle) (1)/ rod ends (2)/ hollow balls (2)
$3.00
6850X: Half shafts, heavy duty (external splined (2)/ internal splined (2))/ metal u-joints (4)
$8.00
6851R: Driveshafts, front, steel-spline constant-velocity (complete assembly) (2)
$69.95
6851X: Driveshaft assembly, front, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)
$10.00
6852R: Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2)
$69.95
6852X: Driveshaft assembly, rear, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)
$10.00
6853X: Stub axles, rear, heavy duty (2)/pins (2)
$6.00
6854X: Stub axles, front, heavy duty (2)/ yokes (2)/ pins (4)
$8.00
6860A: Motor mount (assembled with 3x6 flat-head machine screw)/ 3.0mm NL (1)
$4.00
6860R: Motor mount, 6061-T6 aluminum (blue-anodized)
$34.95
6877: Cover, gear/ motor wire hold-down clip
$4.50
6877A: Cover, gear (clear)
$4.50
6878: Slipper clutch, complete (for Slash 4x4)
$20.00
6880: Housings, differential, rear
$4.00
6881: Housings, differential, front
$4.00
6882X: Gear set, differential (output gears (2)/ spider gears (2)/ spider gear shaft, carrier support)
$15.00
6883: Gear set, center differential (output gears (2)/ spider gears (2)/ spider gear shaft)
$15.00
6884: Housing, center differential/ x-ring gaskets (2)/ ring gear gasket/ bushings (2)/ 5x10x0.5 TW (2)/ CCS 2.5x8 (4)
$5.00
6888: Drive hub, center, rear (1)/ 4x3 GS (1)
$5.00
6890: Plate, motor
$7.00
6890X: Plate, motor, 6061-T6 aluminum (blue-anodized)
$15.00
6893: Input shaft (slipper shaft)/ bearing adapter (1)/ pin (1)
$6.50
6893X: Bearing adapter, 6061-T6 aluminum (blue-anodized) (1)/10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft)
$5.00
Stampede 4X4 (67054-61) Front Assembly Exploded View

 
Print
View PDF
About Careers Contact Privacy Policy GDPR CCPA Terms & Conditions Compliance Trademarks  Patents Site Map Become a Dealer Accessibility
Facebook Twitter Youtube RSS Instagram
Google Trusted StoreAccepted Payment Methods include PayPal, PayPal Credit, MasterCard, Visa, Discover, and American Express
© 2023 Traxxas, All Rights Reserved.