Slayer Pro 4X4 (59076-3) Rear Assembly Exploded View

1633: E-clips/ C-rings

$2.00

1985: PTFE-coated Washers, 5x8x0.5mm (20) (use with ball bearings)

$2.00

2550: Screws, 3x8mm countersunk machine (6) (hex drive)

$2.50

2551: Screws, 3x10mm countersunk machine (6) (hex drive)

$2.50

2552: Screws, 3x12mm countersunk machine (6) (hex drive)

$2.50

2554: Screws, 3x6mm caphead machine (hex drive) (6)

$2.50

2577: Screws, 3x10mm button-head machine (hex drive) (6)

$2.50

2578: Screws, 3x12mm button-head machine (hex drive) (6)

$2.50

2579: Screws, 3x15mm button-head machine (hex drive) (6)

$2.50

2580: Screws, 3x20mm button-head machine (hex drive) (6)

$2.50

2581: Screws, 3x25mm button-head machine (hex drive) (6)

$2.50

2584: Head screws, 3x12mm cap-head machine (hex drive) (6) (TRX® 2.5, 2.5R, 3.3)

$2.50

2587: Screws, 3x10mm caphead machine (6) (no washer)

$2.50

2745: Nuts, 3mm nylon locking (12)

$2.00

3155: Cable ties, medium black (6)

$2.25

3215: Screws, 2.5x6mm cap-head machine (hex drive) (6)

$2.00

3232X: Glow plug, super-duty (long-medium)/gasket

$9.95

3281: Cone, split beveled

$3.00

3934: Body clips, heavy duty (12)

$3.00

3936: Screws, 4x10mm button-head machine (hex drive) (6)

$2.50

3938: Screws, 4x14mm button-head machine (hex drive) (6)

$2.50

3939: Screws, 4x6mm button-head machine (hex drive) (with threadlock) (6)

$3.00

3953: Spur gear, 36-tooth (1.0 metric pitch)

$3.00

3954: Spur gear, 38-tooth (1.0 Module)

$3.00

3955: Spur gear, 40-tooth (1.0 Module)

$3.00

3964: Screws, 3x32mm cap-head machine (hex drive) (6)

$2.50

3965: Screws, 2.5x8mm cap-head machine (6)

$2.50

3982: Washer, PTFE-coated 6x8x0.5 (10)

$1.25

4146X: Clutch shoes (2)/ spring

$7.75

4147: Wheel nuts, 5mm nylon locking (8)

$2.00

4147X: Nuts, 5mm flanged nylon locking (aluminum, blue-anodized) (4)

$6.00

4579X: Connector, wiring harness (EZ-Start® and EZ-Start® 2)

$5.00

4581X: Lead wire, glow plug (blue) (EZ-Start® and EZ-Start® 2)/ molex pin extractor (use where glow plug wire does not have bullet connector)

$1.75

4611: Ball bearings (5x11x4mm) (2)

$6.00

4897: Screws, set (grub) 4mm (6) (w/ threadlock)

$3.00

4933: Pivot balls (4)/ pivot ball cap bushings (4)

$6.00

4933X: Pivot balls, hard anodized 7075 T-6 aluminum (4)/ pivot ball cap (4)

$20.00

4954: Hex wheel hubs (2)/ axle pins (2.5x12mm) (2)

$2.50

4954R: Hex wheel hubs, steel (2)/ axle pins (2.5x12mm) (2)

$3.00

4954X: Hex wheel hubs, 6061 T-6 aluminum (blue) (4)/ axle pins (2.5x10mm) (4)

$20.00

4978: Screws, 3x21mm button-head machine (hex drive) (partially threaded, Revo® brake bolts) (6)

$2.50

5116: Ball bearings, blue rubber sealed (5x11x4mm) (2)

$3.50

5117: Ball bearings, blue rubber sealed (6x12x4mm) (2)

$4.00

5118: Ball bearings, blue rubber sealed (8x16x5mm) (2)

$6.00

5119: Ball bearings, blue rubber sealed (10x15x4mm) (2)

$7.00

5120: Ball bearings, blue rubber sealed (12x18x4mm) (2)

$8.00

5142: Screws, 3x15mm caphead machine (hex drive) (with split and flat washers) (6)

$2.75

5144: Screw pin, 2.5x18mm (6)

$1.50

5145: Screw pin, 4x15mm (6)

$3.50

5147X: Nuts, 5mm flanged nylon locking (steel, serrated) (8)

$3.50

5157: Cover plates and seals, forward only conversion (Revo®) (Optidrive® blank-out plate, Optidrive® sensor cover, shift fork cover)

$2.50

5169: Screws, 2.6x8mm countersunk machine (6) (EZ Start 2 motor)

$2.00

5180: Ball bearings, blue rubber sealed (6x13x5mm) (2)

$4.00

5211R: Roller clutch/ 6x8x0.5 TW (1) (also called one-way bearing) (TRX® 2.5, 2.5R, 3.3)

$22.50

5213: O-ring, backplate 20x1.4mm (TRX® 2.5, 2.5R)

$0.75

5214: Clutch bell (14-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm e-clip (2) (requires 5x10x4mm ball bearings part #4609) (1.0 metric pitch)

$12.00

5215: Clutch bell (15-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm e-clip (2) (requires 5x11x4mm ball bearings part #4611)

$12.00

5216: Clutch bell (16-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm e-clip (2) (requires 5x11x4mm ball bearings part #4611)

$12.00

5217: Clutch bell (17-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm e-clip (2) (requires 5x11x4mm ball bearings part #4611) (1.0 metric pitch)

$12.00

5223: Ball bearings (7x17x5mm) (1)/ 12x21x5mm (1) (TRX® 2.5 engine bearings)

$30.00

5224: Rod, connecting (TRX® 2.5, 2.5R, 3.3)

$29.00

5225: Crankcase, without bearings (TRX® 3.3) (requires #5223 ball bearings)

$32.50

5228: Head protector, cooling head (1)/3x6mm CCS (5) (TRX® 3.3)

$3.00

5234: Carburetor body/ fuel inlet plug/ 5x.9mm O-ring (1-each) (TRX® 2.5, 2.5R, 3.3)

$16.00

5238R: Cooling head, PowerTune (machined aluminum, blue- anodized) (TRX® 3.3), head protector (1), 3x6mm CCS (5)

$39.95

5239: Bolt, carburetor pinch/ 3mm locknut (TRX® 2.5, 2.5R, 3.3)

$3.00

5240: End cap, carburetor body/ 6.2x1.2mm O-ring/ (1-each) (TRX® 2.5, 2.5R, 3.3)

$2.50

5241: Screw, idle speed/ 2x1mm O-ring (1-each) (TRX® 2.5, 2.5R, 3.3)

$4.00

5242: Dust boot, throttle (2)/ return spring (TRX® 2.5, 2.5R, 3.3)

$3.25

5243: Throttle arm, carburetor/ 3mm set screw (1-each) (TRX® 2.5, 2.5R, 3.3)

$6.00

5244: Flywheel nut (TRX® 2.5 and 2.5R)

$4.25

5245: Pipe coupler, molded (blue)/ exhaust deflecter (rubber, blue)/ cable ties, long (2)/ cable ties, short (2)

$4.00

5245X: Pipe coupler, molded (black)/ exhaust deflecter (rubber, black)/ cable ties, long (2)/ cable ties, short (2)

$4.00

5250: Needle assembly, high-speed (with fuel fitting)/ 2.5x1.15mm O-ring (2)/ 5.3x7.8x.6mm crush washer (2) (TRX® 2.5, 2.5R, 3.3)

$11.00

5251: Needle, low-speed/ 2x1mm O-ring (2) (TRX® 2.5, 2.5R, 3.3)

$3.50

5252: Carburetor, complete (minus air filter assy.) (TRX® 2.5, 2.5R, 3.3 composite slide)

$44.95

5256: O-ring, header 12.2x1mm (TRX® 2.5)

$1.20

5262: Air filter and pre-filter inserts, foam (high-volume) (3) (pre-oiled, assembled) (use with #5266 filter body) (TRX® 2.5, 2.5R, 3.3)

$10.00

5266: Air filter body (high-volume)/ filter support/ cap/ foam filter, pre-filter/ Revo® air filter base (angled)/wire mount/hardware (1 each) (TRX® Engines)

$14.00

5270R: EZ-Start® 2, complete system with controller, drive unit, wiring harness

$49.95

5273: Cush-drive elements (4) (EZ Start 2)

$2.50

5274: Backplate/ 20x1.4mm O-ring (for engines with starter) (TRX® 2.5, 2.5R, 3.3)

$12.00

5275: Housing set (inner, outer)/ 3x12mmBCS (5)/ 3x20BCS (1)/ motor bushing (EZ-Start® 2)

$7.50

5276: Gear set (complete) (EZ-Start® 2)

$9.00

5277: Shaft, starter (TRX® 2.5 & 2.5R)

$9.00

5279: Motor (hi-torque)/ pinion gear/ motor bushing (EZ-Start® 2)

$15.00

5280: Control box (complete) (EZ-Start® 2)

$15.00

5281: Control box battery cover w/ belt clip (EZ Start 2)

$4.00

5282: Screws, 3x12mm button-head machine (6) (Starter attachment screws w/ threadlock)

$3.00

5288: Crankshaft, IPS (for engines w/starter) (TRX® 3.3)

$39.00

5290: Piston/Sleeve (Matched Set), Wrist Pin Clips(2) (TRX® 3.3)

$69.95

5291: Wrist pin (1), Wrist Pin Clips(2) (TRX® 3.3)

$3.50

5292: Gaskets, cooling head: 0.20, 0.30, 0.40mm (1 each) (0.30mm stock) (TRX® 3.3)

$3.50

5314: Body mounts, front & rear/ body mount posts, front & rear/ 2.5x18mm screw pins (4)/ 4x10mm BCS (1)

$11.00

5317: Shock mounts (front & rear)/ wire clip (1)/ chassis wire clips (4)/ 3x32mm CS (4)/ 3x6mm BCS (1)

$6.00

5318: Push rod (steel) (assembled with rod ends) (2) (use with long travel or #5357 progressive-1 rockers)

$7.00

5321: Suspension pin set (front or rear, hardened steel), 3x20mm (4), 3x40mm (2)

$4.75

5323: Bulkhead tie bars, front & rear (blue anodized aluminum)

$9.50

5329: Bulkhead, rear (L&R halves)/ diff retainer, rear/ 4x14mm BCS (2)

$15.00

5334R: Axle carriers, left & right (1 each) (use with larger 6x13mm ball bearings)/ bearing adapters (for 6x12mm ball bearings) (2)/ dust boot retainers (4)

$10.00

5337: Skid plate set, front (2 pieces, plastic)/ skid plate, rear (1 piece, plastic)

$8.00

5340: Header, exhaust (tubular aluminum, silver anodized) (TRX® 2.5, 2.5R)

$20.00

5342: Tuned pipe, aluminum, blue anodized (dual chamber with pressure fitting)/ 4mm GS

$46.00

5346: Hanger, metal wire (for tuned pipe)/ 4mm GS (1)/ 4x10 BCS (1)

$2.00

5351: Slipper pressure plate and hub (alloy)

$8.00

5352X: Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))

$7.50

5354: Rocker Arm Stud

$3.25

5354X: Rocker Arm Stud Aluminum

$12.50

5355: Hollow ball, tall centered (2)/ tall offset hollow ball (2)/ bump steer adjustment shims; 3.5mm (2), 1.17mm (2)

$4.75

5358: Rocker arm set, progressive-2 (90-T)/ spacers (red aluminum) (8)

$11.00

5359: Rocker arm set, progressive-3 (90-T) (requires pushrods part #5319 or 5319X)

$8.00

5364: Brake disk (40mm steel)

$2.50

5365: Brake pad set (inner and outer calipers with bonded friction material)

$7.50

5366: Input shaft, transmission (slipper shaft)

$4.00

5368: Linkage set, throttle & brake, Revo® (includes servo horns, rod guides, brake spring, brake adjustment dial, brake lever, rods (wires), bellcrank, throttle return spring, hardware)

$8.00

5378X: Pivot ball caps (4)/ dust boots, rubber (4)/ dust plugs, rubber (4)/ dust boot retainers, black (4), blue (4) (2 pkgs. req. to complete truck)

$6.75

5379R: Ring gear, differential/ pinion gear, differential (machined, spiral cut) (front)

$39.95

5379X: Ring gear, differential/ pinion gear, differential

$15.00

5380: Housings, differential (front & rear)

$4.00

5381: Carrier, differential/ x-ring gaskets (2)/ ring gear gasket/ 6x10x0.5 TW

$4.25

5383: Gear set, 2-speed close ratio (2nd speed gear 40T, 13T-16T input gears, hardware)

$7.50

5384: Gear set, 2-speed wide ratio (2nd speed gear 38T, 13T-18T input gears, hardware)

$7.50

5385: Gear set, 2-speed standard ratio (2nd speed gear 39T, 13T-17T input gears, hardware)

$7.50

5386: Gear, 1st speed, 43T

$3.00

5388: Brake cam (1)/ sleeve (1)

$4.50

5390: Primary clutch assembly/ 2x9.8mm pin/ 6x8x0.5 TW (1)

$14.00

5391R: Gearbox halves (front & rear)/ rubber access plug/ shift detent ball/ spring/ 4mm GS/ shift shaft seal, glued

$10.00

5393: Primary shaft/ 1st speed hub/ one-way bearing/ snap ring/ 5x8mm PTFE-coated washer

$22.95

5394: Output Shaft, Steel, Transmission, Forward Only

$10.00

5394X: Forward only conversion kit (eliminates reverse)

$12.50

5397: Optidrive® sensor assembly/ 2.5x6mm CS (2)

$8.00

5407: TRX 3.3 Engine IPS Shaft w/ Recoil Starter

$219.95

5452: U-joints, driveshaft (carrier (4)/ 4.5mm cross pin (4)/ 3mm cross pin (4)/ e-clips (20)) (metal parts for 2 driveshafts)

$10.00

5453: Yokes, stub axle (2)/ pins (2)

$4.00

5454: Stub axle (steel) (2)

$5.00

5456: Half shafts, center (internal splined (2)/ external splined (2)) (plastic parts only)

$4.25

5457: Yoke, brake (1)/ torque pins (2)/Screw Pin 4x15(1)

$4.00

5458X: Yokes, differential and transmission (2)/ 4x15mm screw pins (2)

$4.00

5460: Shocks, GTR (assembled) (2) (without springs)

$29.95

5460X: Shocks, GTR hard-anodized, PTFE-coated aluminum bodies with TiN shafts (fully assembled w/o springs) (4)

$69.95

5490: Tuned pipe, Resonator®, R.O.A.R. legal (single-chamber, enhances low to mid-rpm power) (for Revo® with TRX® Racing Engines)

$44.95

5493: Tuned pipe, Resonator®, R.O.A.R. legal (dual-chamber, enhances mid to high-rpm power) (for Revo® with TRX® Racing Engines)

$49.95

5525R: Rod ends, heavy duty (Jato®/Slayer) (8)

$4.00

5871: Tires, off-road racing, SCT dual profile 4.3x1.7- 2.2/3.0" (2)/ foam inserts (2)

$18.95

5871R: Tires, Ultra soft, S1 compound for off-road racing, SCT dual profile 4.3x1.7- 2.2/3.0" (2)/ foam inserts (2)

$18.95

5918: Push rod (steel) (assembled with rod ends) (2) (use with progressive-2 rockers)

$7.00

5918X: Push rod (aluminum) (assembled with rod ends) (2) (use with progressive-2 rockers)

$12.50

5933X: Suspension arm upper (1)/ suspension arm lower (1) (right rear) (fits Slayer Pro 4X4)

$7.50

5934X: Suspension arm upper (1)/ suspension arm lower (1) (left rear) (fits Slayer Pro 4X4)

$7.50

5936: Bumper, rear/ brace, rear

$10.00

5939: Turnbuckles, toe links, 72mm (2) (assembled with rod ends and hollow balls)

$9.00

5939R: Toe links, Slayer (Tubes™ 7075-T6 aluminum, red) (88mm, fits front or rear) (2)/ rod ends, rear (4)/ rod ends, front (4)/ wrench (1)

$21.95

5972A: Wheels, SCT satin chrome with red beadlock, dual profile (2.2" outer 3.0" inner) (2)

$10.95

5973: Tires & wheels, assembled, glued (SCT, satin chrome wheels, (dual profile 2.2" outer 3.0" inner), SCT off-road racing tires, foam inserts) (2)

$22.95

5974: Wheels, SCT Split-Spoke, satin chrome, black beadlock style, dual profile (2.2" outer 3.0" inner) (front/rear) (2)

$7.95

5975: Tire & wheel assy, glued (SCT Split-Spoke, satin, black beadlock wheel, BFGoodrich® Mud-Terrain™ T/A® KM2 tire, foam inserts) (2) (front/rear)

$23.95

5975A: Tire & wheel assy, glued (SCT Split-Spoke chrome, red beadlock style wheel, BFGoodrich® Mud-Terrain™ T/A® KM2 tire, inserts) (2) (front/rear)

$24.95

5976R: Tire & wheel assy, glued (S1 compound) (SCT Split-Spoke satin chrome, black beadlock wheel, Kumho tire, insert) (2) (front/rear)

$24.95

5996: Primary gear set (23T and 33T)/ 2x11.8mm pin/ pin retainer/ disc spring

$8.00

6542: Flywheel with magnet (35mm)

$8.00

6542X: Flywheel (large, knurled for use with starter boxes)

$12.00

6870: Tires, Kumho (dual profile 4.3x1.7- 2.2/3.0") (2)/ foam inserts (2)

$18.95

6870R: Tires, Kumho, ultra-soft (S1 off-road racing compound) (dual profile 4.3x1.7- 2.2/3.0") (2)/ foam inserts (2)

$18.95

6871: Tires, BFGoodrich® Mud-Terrain™ T/A® KM2 (dual profile 4.3x1.7- 2.2/3.0") (2)/ foam inserts (2)

$18.95

6871R: Tires, BFGoodrich® Mud-Terrain™ T/A® KM2 , ultra-soft (S1 off-road racing compound) (dual profile 4.3x1.7- 2.2/3.0") (2)/ foam inserts (2)

$18.95

Slayer Pro 4X4 (59076-3) Rear Assembly Exploded View

Slayer Pro 4X4 (59076-3) Chassis Assembly Exploded View

Slayer Pro 4X4 (59076-3) Driveshafts Assembly Exploded View

Slayer Pro 4X4 (59076-3) Engine Assembly Exploded View

Slayer Pro 4X4 (59076-3) Front Assembly Exploded View

Slayer Pro 4X4 (59076-3) Rear Assembly Exploded View

Slayer Pro 4X4 (59076-3) Tire Chart

Slayer Pro 4X4 (59076-3) Transmission Assembly Exploded View

View PDF

Enter your email address to Subscribe.