Slash Modified (104354-74) Chassis Assembly Exploded View

10411: Body, Slash® Modified (clear, trimmed, requires painting)/ decal sheets

10411-BLUE: Body, Slash® Modified, blue (painted, decals applied) (assembled with front & rear body latches and body support for clipless mounting)

$139.95

10411-GRN: Body, Slash® Modified, green (painted, decals applied) (assembled with front & rear body latches and body support for clipless mounting)

$139.95

10411-ORNG: Body, Slash® Modified, orange (painted, decals applied) (assembled with front & rear body latches and body support for clipless mounting)

$139.95

10411-PINK: Body, Slash® Modified, pink (painted, decals applied) (assembled with front & rear body latches and body support for clipless mounting)

$139.95

10411-RED: Body, Slash® Modified, red (painted, decals applied) (assembled with front & rear body latches and body support for clipless mounting)

$139.95

10411X: Body, Slash® Modified, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheets

$99.95

10412: Latch, body mount (front & rear)/ front body support (fits #10411 body)

$8.00

10413: Body reinforcement set (front & rear) (fits #10411 body)

$4.00

10414: Body cage, driver/ retainers (3) (fits #10411 body)

$6.00

10415: Body reinforcement set, side (front, middle, rear) (left & right) (fits #10411 body)

$5.00

10416: Body washers (2)/ roof washers (5)/ 3x10mm CCS (7) (fits #10411 body)

$6.00

10417: Body cage (front & rear, left & right) (fits #10411 body)

$8.00

10418: Wing, Slash® Modified (black)

$8.00

10419: Interior, Slash® Modified, black (painted)/ decal sheet

$24.95

10470: Tires, Hoosier® (dual profile 4.3x1.7- 2.2/3.0") (2)/ foam inserts (2)

$19.95

10472: Wheels, dirt oval, graphite gray, dual profile (2.2” outer, 3.0” inner) (2) (4WD front/rear, 2WD rear only)

$8.00

10474: Tires & wheels, assembled, glued (dirt oval, graphite gray wheels, Hoosier® tires, foam inserts) (2) (4WD front/rear, 2WD rear only)

$24.95

1654: Wheel hubs, hex (2)/ stub axle pins (2)

$2.00

1654X: Wheel hubs, hex (blue-anodized, lightweight aluminum) (2)/ axle pins(2)

$9.00

1726A: Antenna, tube, black (1)/ vinyl antenna cap (1)/ wire retainer (1)

$2.00

1747: Nuts, 4mm nylon locking (10)

$2.00

1747A: Nuts, aluminum, flanged, serrated (4mm) (red-anodized) (4)

$7.50

1747G: Nuts, aluminum, flanged, serrated (4mm) (green-anodized) (4)

$7.50

1747P: Nuts, 4mm flanged nylon locking (aluminum, pink anodized) (4)

$7.50

1747R: Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4)

$7.50

1747T: Nuts, aluminum, flanged, serrated (4mm) (orange-anodized) (4)

$7.50

1926: Antenna caps, vinyl (2)/ antenna spool

$2.00

1985: PTFE-coated Washers, 5x8x0.5mm (20) (use with ball bearings)

$2.00

2423: Gear, 23-T pinion (48-pitch) (fits 3mm shaft)/ set screw

$3.00

2542: Screws, 4x12mm countersunk machine (hex drive) (6)

$2.50

2551: Screws, 3x10mm countersunk machine (6) (hex drive)

$2.50

2552: Screws, 3x12mm countersunk machine (6) (hex drive)

$2.50

2553: Screws, 3x15mm countersunk machine (6) (hex drive)

$2.50

2554: Screws, 3x6mm caphead machine (hex drive) (6)

$2.50

2555A: Suspension arms, blue, rear, heavy duty (2)

$12.00

2555G: Suspension arms, green, rear, heavy duty (2)

$12.00

2555R: Suspension arms, red, rear, heavy duty (2)

$12.00

2555T: Suspension arms, orange, rear, heavy duty (2)

$12.00

2555X: Suspension arms, black, rear, heavy duty (2)

$12.00

2575: Screws, 3x6mm button-head machine (hex drive) (6)

$2.50

2576: Screws, 3x8mm button-head machine (hex drive) (6)

$2.50

2577: Screws, 3x10mm button-head machine (hex drive) (6)

$2.50

2578: Screws, 3x12mm button-head machine (hex drive) (6)

$2.50

2579: Screws, 3x15mm button-head machine (hex drive) (6)

$2.50

2580: Screws, 3x20mm button-head machine (hex drive) (6)

$2.50

2583: Screws, 3x18 button-head machine (hex drive) (6)

$2.50

2591: Screws, 3x23mm button-head machine (hex drive) (6)

$2.50

2593: Screws, 3x14mm button-head machine (hex drive) (6)

$3.00

2754: Stub axle pins (4)

$1.00

3159: Screws, 3x10mm caphead machine (hex drive) (6)/ lockwashers (6)/ hex wrench

$2.75

3229: Screws, 2.5x10mm cap-head machine (hex drive) (6)

$2.50

3236: Screws, 2.5x12mm cap-head machine (6)

$2.50

3351R: Motor, Velineon® 3500, brushless (assembled with 12-gauge wire and gold-plated bullet connectors)

$89.95

3383: BL-2s™ Electronic Speed Control, waterproof (brushless) (fwd/rev/brake)

$79.95

3384: Motor, BL-2s™ 3300, brushless

$39.95

3638R: Shock tower (rear) (for clipless body mounting)

$4.50

3640: Suspension screw pin set, steel (hex drive) (requires part # 2640 for a complete suspension pin set) (Rustler®, Stampede®, Bandit)

$4.50

3642X: Shoulder screws, Ultra Shocks (3x12 hex drive) (6)

$3.00

3644: Turnbuckles, camber link, 39mm (69mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)

$7.00

3646: Screws, 3x15mm flat-head machine (hex drive) (6)

$2.50

3652P: Stub axle carriers, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (pink-anodized)/ 5x11mm ball bearings (4)

$29.95

3785: Motor, Titan® 12T (12-Turn, 550 size)

$25.95

3931: Screws, 3x8mm flat-head machine (hex drive) (6)

$2.50

3935: Body clip (mounting clip), angled, 90-degrees (10)

$3.00

3965: Screws, 2.5x8mm cap-head machine (6)

$2.50

4676: Spur gear, 76-tooth (48-pitch) (for models with Torque Control slipper clutch)

$3.00

4683: Spur gear, 83-tooth (48-pitch) (for models with Torque Control slipper clutch)

$3.00

4686: Spur gear, 86-tooth (48-pitch) (for models with Torque-Control slipper clutch)

$3.00

4690: Spur gear, 90-tooth (48-pitch) (for models with Torque-Control slipper clutch)

$3.00

5116: Ball bearings, blue rubber sealed (5x11x4mm) (2)

$3.50

5116A: Ball bearings, black rubber sealed (5x11x4mm) (2)

$3.50

5119: Ball bearings, blue rubber sealed (10x15x4mm) (2)

$7.00

5525: Rod ends (12)/ hollow balls (12)

$9.00

5526: Antenna crimp nut, aluminum (blue-anodized)/ antenna nut tool

$4.00

5529: Shim set, 3x7x1mm (2), 3x6x0.5mm (4), 3x7x2mm (2)/ hollow balls, captured (4)

$3.50

5552X: Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/ pin/ 4.0mm NL (1)/ 5.0mm NL (1))

$10.00

5556: Slipper pressure plate & hub (aluminum alloy)

$8.00

5624: Box, receiver (sealed)/ foam pad/ silicone grease/ 3x8mm BCS (2)/ 2.5x8mm CS (2)/ 3x6mm BCS (2)

$12.00

5625: Seal kit, receiver box (includes o-ring, seals, and silicone grease)

$4.00

5646: Gear, 20-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw

$5.00

5827: Hold down, battery/ hold down retainer/ battery post/ foam spacer/ angled body clip

$6.00

5827X: Hold down, battery/ hold down retainer/ battery post/ foam spacer/ angled body clip (allows for installation of taller, multi-cell batteries)

$6.00

5832: Chassis, low CG (black)

$19.00

5832A: Chassis, low CG (blue)

$19.00

5832G: Chassis, low CG (grey)

$19.00

5833: Nerf bars, low CG (black)

$4.00

5833A: Nerf bars, low CG (blue)

$4.00

5833G: Nerf bars, low CG (grey)

$4.00

5836: Bumper, rear/ bumper mount, rear (black)

$10.00

5836P: Bumper, rear/ bumper mount, rear (pink)

$10.00

6519: Receiver, micro, TQ 2.4GHz (3-channel)

$29.95

6783: Gear set, differential (spider gears (4)/ spider gear shaft (2))

$10.00

6852A: Driveshaft assembly, rear, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

$12.00

6852R: Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2)

$69.95

6853A: Stub axle assembly, rear, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft)

$6.00

6877: Cover, gear/ motor wire hold-down clip

$4.50

7462: Shocks, GTR xx-long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)

$35.95

7462-ORNG: Shocks, GTR xx-long orange-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)

$36.95

7462-PINK: Shocks, GTR xx-long pink-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)

$36.95

7462-RED: Shocks, GTR xx-long red-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)

$36.95

7462G: Shocks, GTR xx-long green-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)

$35.95

7462X: Shocks, GTR xx-long, hard-anodized, PTFE-coated bodies with TiN shafts (assembled) (2) (without springs)

$36.95

8347: Nuts, 4mm flanged nylon locking, serrated (black) (10)

$4.00

9150: Carriers, stub axle, rear, extreme heavy duty, black (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)

$6.00

9150-BLUE: Carriers, stub axle, rear, extreme heavy duty, blue (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)

$6.00

9150-GRAY: Carriers, stub axle, rear, extreme heavy duty, gray (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)

$6.00

9150-GRN: Carriers, stub axle, rear, extreme heavy duty, green (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)

$6.00

9150-RED: Carriers, stub axle, rear, extreme heavy duty, red (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)

$6.00

9460: Wheelie bar, black (assembled)/ wheelie bar mount

$24.95

9460X: Wheelie bar, black chrome (assembled)/ wheelie bar mount

$34.95

9464: Wheelie bar mount (heavy duty)

$5.00

9480A: Differential assembly, center, complete (fits Pro Series Magnum 272R™ Transmission)

$49.95

9481: Differential with steel ring gear/ side cover plate/ gasket/ x-rings (2)/ 2.5x10mm BCS (4)

$15.00

9482: Differential gasket/ x-rings (2)

$2.00

9483: Output gears, differential (2)

$20.00

9489X: Cover, gear/ rubber gear cover plug/ 3x10mm BCS (1)/ 3x14mm BCS (1)

$4.00

9490: Plate, motor, 6061-T6 aluminum (blue-anodized) (3.2mm thick)

$10.00

9490A: Plate, motor, lightweight machined 6061-T6 aluminum (orange-anodized) (4mm thick)/ 3x10mm CS with split and flat washer (2)

$14.00

9490G: Plate, motor, lightweight machined 6061-T6 aluminum (green-anodized) (4mm thick)/ 3x10mm CS with split and flat washer (2)

$14.00

9490P: Plate, motor, lightweight machined 6061-T6 aluminum (pink-anodized) (4mm thick)/ 3x10mm CS with split and flat washer (2)

$14.00

9490R: Plate, motor, lightweight machined 6061-T6 aluminum (red-anodized) (4mm thick)/ 3x10mm CS with split and flat washer (2)

$14.00

9490T: Plate, motor, lightweight machined 6061-T6 aluminum (gray-anodized) (4mm thick)/ 3x10mm CS with split and flat washer (2)

$14.00

9490X: Plate, motor, lightweight machined 6061-T6 aluminum (blue-anodized) (4mm thick)/ 3x10mm CS with split and flat washer (2)

$14.00

9491: Gear adapter set, fixed (48-pitch)

$5.00

9492: Idler gear, 30-tooth/ idler gear shaft (steel)

$8.00

9493: Gearbox halves, left & right/ differential cover (charcoal gray)

$8.00

9494: Input gear, 22-tooth/ input shaft (transmission) (heavy duty) (fits Bandit®, Rustler®, Stampede®, Slash® 2WD)

$10.00

9495: Pro Series Magnum 272R™ Transmission, complete (assembled) (fits 1/10-scale 2WD Rustler®, Bandit®, Stampede®, Slash®)

$99.95

Slash Modified (104354-74) Chassis Assembly Exploded View

Slash Modified (104354-74) Body Assembly Exploded View

Slash Modified (104354-74) Chassis Assembly Exploded View

Slash Modified (104354-74) Front Assembly Exploded View

Slash Modified (104354-74) Rear Assembly Exploded View

Slash Modified (104354-74) Transmission Assembly Exploded View

View PDF

Enter your email address to Subscribe.