Rustler 4X4 Brushless (67164-4) Front Assembly Exploded View

1552: 3x8mm Hex Cap Screws (6)/ Washers (6)/ Wrench (1)

$3.00

1664: Shock shafts, steel, chrome finish (long) (2)

$3.00

1664T: Shock shafts, hardened steel, titanium nitride coated (long) (2)

$10.00

1726: Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)

$1.00

1747R: Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4)

$7.50

1748: Nuts, 4mm nylon locking, black (10)

$3.00

1765: Silicone diaphragms (4)

$2.00

1926: Antenna caps, vinyl (2)/ antenna spool

$2.00

1942: Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2)

$7.00

1985: PTFE-coated Washers, 5x8x0.5mm (20) (use with ball bearings)

$2.00

2056: Servo, high-torque, waterproof (blue case)

$33.95

2362: Shock rebuild kit (for 2 shocks)

$2.50

2535: Screws, 4x10mm countersunk machine (hex drive) (6)

$2.50

2542: Screws, 4x12mm countersunk machine (hex drive) (6)

$2.50

2545: Bushings (plastic) (5x8x2.5mm) (4)

$3.00

2550: Screws, 3x8mm countersunk machine (6) (hex drive)

$2.50

2551: Screws, 3x10mm countersunk machine (6) (hex drive)

$2.50

2552: Screws, 3x12mm countersunk machine (6) (hex drive)

$2.50

2553: Screws, 3x15mm countersunk machine (6) (hex drive)

$2.50

2554: Screws, 3x6mm caphead machine (hex drive) (6)

$2.50

2575: Screws, 3x6mm button-head machine (hex drive) (6)

$2.50

2577: Screws, 3x10mm button-head machine (hex drive) (6)

$2.50

2579: Screws, 3x15mm button-head machine (hex drive) (6)

$2.50

2580: Screws, 3x20mm button-head machine (hex drive) (6)

$2.50

2584: Head screws, 3x12mm cap-head machine (hex drive) (6) (TRX® 2.5, 2.5R, 3.3)

$2.50

2587: Screws, 3x10mm caphead machine (6) (no washer)

$2.50

2593: Screws, 3x14mm button-head machine (hex drive) (6)

$3.00

2656: Shock shafts, steel, chrome finish (xx-long) (2)

$3.00

2656T: Shock shafts, hardened steel, titanium nitride coated (xx-long) (2)

$10.00

2669: Piston head set (2-hole (2)/ 3-hole (2))/ shock mounting bushings & washers (2) (Big Bore Shocks)

$2.50

2742X: Rod ends, short (6)/ hollow balls (6)

$4.00

2743: Set (grub) screws, 3mm hardened (12)

$3.00

2746: Washers, 3x6mm metal (12)

$1.50

2754: Stub axle pins (4)

$1.00

3383: BL-2s™ Electronic Speed Control, waterproof (brushless) (fwd/rev/brake)

$79.95

3384: Motor, BL-2s™ 3300, brushless

$39.95

3628: Box, receiver (sealed)/ foam pad/2.5x8mm CS (4)/ 3x10mm CS (2)

$12.00

3642X: Shoulder screws, Ultra Shocks (3x12 hex drive) (6)

$3.00

3655G: Suspension arms, green, front/rear (left & right), heavy duty (2)

$12.00

3655L: Suspension arms, red, front/rear (left & right), heavy duty (2)

$12.00

3655P: Suspension arms, blue, front/rear (left & right), heavy duty (2)

$12.00

3655R: Suspension arms, front/rear (left & right), heavy duty (2)

$12.00

3655T: Suspension arms, orange, front/rear (left & right), heavy duty (2)

$12.00

3759: Springs, front (2)

$5.00

3765A: Body, Ultra Shock (long) (grey) (2)

$3.00

3766A: Body, Ultra Shock (XXL) (grey) (2)

$3.00

3767: Shock caps (2)/ shock bottoms (2)

$3.00

3768: Spring retainers, upper & lower (2)/ piston head set (2-hole (2)/ 3-hole (2))

$3.00

3769: Spring pre-load spacers: 1mm (4)/ 2mm (2)/ 4mm (2)/ 8mm (2)

$4.00

3785: Motor, Titan® 12T (12-Turn, 550 size)

$25.95

3919: Gear, 12-T pinion (32-pitch)/ set screw

$4.00

3931: Screws, 3x8mm flat-head machine (hex drive) (6)

$2.50

3932: Screws, 3x6mm flat-head machine (hex drive) (6)

$2.50

3933: Screws, 4x16mm button-head machine (hex drive) (6)

$2.50

3936: Screws, 4x10mm button-head machine (hex drive) (6)

$2.50

3937: Screws, 4x12mm button-head machine (hex drive) (6)

$2.50

3938: Screws, 4x14mm button-head machine (hex drive) (6)

$2.50

3942X: Gear, 12-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw

$5.95

3956: Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch)

$3.00

3965: Screws, 2.5x8mm cap-head machine (6)

$2.50

3967: Shoulder screws 3x10 (6) (without threadlock)

$3.50

3981: PTFE-coated Washers, 6x9.5x0.5mm (10) (use with ball bearings)

$1.25

4859: CS 3x10 flathead (hex drive)

$1.75

5114: Ball bearings, blue rubber shield (5x8x2.5mm) (2)

$4.00

5116: Ball bearings, blue rubber sealed (5x11x4mm) (2)

$3.50

5117: Ball bearings, blue rubber sealed (6x12x4mm) (2)

$4.00

5117A: Ball bearings, black rubber sealed (6x12x4mm) (2)

$4.00

5118: Ball bearings, blue rubber sealed (8x16x5mm) (2)

$6.00

5119: Ball bearings, blue rubber sealed (10x15x4mm) (2)

$7.00

5120: Ball bearings, blue rubber sealed (12x18x4mm) (2)

$8.00

5120A: Ball bearings, black rubber sealed (12x18x4mm) (2)

$8.00

5142: Screws, 3x15mm caphead machine (hex drive) (with split and flat washers) (6)

$2.75

5351: Slipper pressure plate and hub (alloy)

$8.00

5352R: Rebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))

$9.50

5352X: Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))

$7.50

5379R: Ring gear, differential/ pinion gear, differential (machined, spiral cut) (front)

$39.95

5379X: Ring gear, differential/ pinion gear, differential

$15.00

5381: Carrier, differential/ x-ring gaskets (2)/ ring gear gasket/ 6x10x0.5 TW

$4.25

5552X: Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/ pin/ 4.0mm NL (1)/ 5.0mm NL (1))

$10.00

5556: Slipper pressure plate & hub (aluminum alloy)

$8.00

5677R: Cover, gear/ 3x8mm CS (1) (for single motor installation, use with motor plate #5690X)

$3.50

6519: Receiver, micro, TQ 2.4GHz (3-channel)

$29.95

6717A: Body, Rustler® 4X4 VXL, blue (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)

$59.95

6717G: Body, Rustler® 4X4 VXL, green (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)

$59.95

6717P: Body, Rustler® 4X4 VXL, pink (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)

$59.95

6717R: Body, Rustler® 4X4 VXL, red (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)

$59.95

6717T: Body, Rustler® 4X4 VXL, orange (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)

$59.95

6717X: Body, Rustler® 4X4 VXL, silver (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)

$59.95

6719: Body support/ 3x12mm CS (4)

$7.00

6720: Body mounts, front & rear/ 3x12mm CS (4)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (8)/ 3x12mm BCS (1)

$12.00

6721: Wing, Rustler® 4X4 (black)/ 3x8 FCS (3)

$6.00

6721A: Wing, Rustler® 4x4 (white)/ 3x8 FCS (3)

$6.00

6721G: Wing, Rustler® 4x4 (green)/ 3x8 FCS (3)

$6.00

6721R: Wing, Rustler® 4x4 (red)/ 3x8 FCS (3)

$6.00

6721T: Wing, Rustler® 4x4 (orange)/ 3x8 FCS (3)

$6.00

6721X: Wing, Rustler® 4x4 (blue)/ 3x8 FCS (3)

$6.00

6723R: Chassis (162mm long battery compartment) (fits flat style battery packs) (use only with #7430R front bulkhead & #6726X battery hold-down)

$20.00

6724: Box, receiver (sealed)/ foam pad/ 2.5x8mm CS (4)/ 3x10mm CS (2)

$12.00

6726X: Battery hold-down (3)/ battery clip/ hold-down post/ screw pin/ pivot post screw (fits #6723R chassis with 162mm long battery compartment)

$8.00

6728: Skid plate, roof (body)/ 3x12mm CS (4)

$6.00

6728A: Skid plate, roof (body) (white)/ 3x12 CS (4)

$6.00

6728G: Skid plate, roof (body) (green)/ 3x12 CS (4)

$6.00

6728R: Skid plate, roof (body) (red)/ 3x12mm CS (4)

$6.00

6728T: Skid plate, roof (body) (orange)/ 3x12 CS (4)

$6.00

6728X: Skid plate, roof (body) (blue)/ 3x12mm CS (4)

$6.00

6734G: Body, Rustler® 4X4, green & blue/ window, grille, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)

$59.95

6734L: Body, Rustler® 4X4, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheet

$34.95

6734P: Body, Rustler® 4X4, pink & purple/ window, grille, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)

$59.95

6734R: Body, Rustler® 4X4, red & blue/ window, grille, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)

$59.95

6734T: Body, Rustler® 4X4, orange & blue/ window, grille, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)

$59.95

6736: Bumper, front/ bumper support

$6.00

6737: Bumper, rear/ bumper mount, rear

$7.00

6740-BLUE: Body, Rustler® 4X4, blue (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)

$59.95

6740-RED: Body, Rustler® 4X4, red (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)

$59.95

6740L: Body, Rustler® 4X4, ProGraphix® (graphics are printed, requires paint & final color application)/ body mounts (front & rear)/ rear body support/ decal sheet

$49.95

6742: Toe link, front & rear (molded composite) (2)/ hollow balls (4) (87mm center to center)

$5.00

6742G: Toe links (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends (4) aluminum wrench (1)

$34.95

6742R: Toe links (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends (4) aluminum wrench (1)

$34.95

6742X: Toe links (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends (4) aluminum wrench (1)

$34.95

6747: Gear, 11-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw

$3.50

6748-BLK: Camber link set (plastic/ non-adjustable) (front &rear) (black)

$3.00

6763: Tires & wheels, assembled, glued (2.8") (RXT gray wheels, Talon EXT tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (2) (TSM rated)

$25.95

6765: Driveshaft, center, 6061-T6 aluminum (blue-anodized) (189mm)

$10.00

6765A: Driveshaft, center, 6061-T6 aluminum (orange-anodized) (189mm)

$10.00

6765G: Driveshaft, center, 6061-T6 aluminum (green-anodized) (189mm)

$10.00

6765R: Driveshaft, center, 6061-T6 aluminum (red-anodized) (189mm)

$10.00

6767: Driveshaft, center, plastic (black)/ screw pin

$4.00

6769: Tires, Talon EXT 2.8" (2)/ foam inserts (2)

$19.95

6772: Wheels, RXT 2.8" (black) (2)

$7.00

6773: Tires & wheels, assembled, glued (2.8") (RXT black wheels, Talon EXT tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (2) (TSM rated)

$25.95

6773A: Tires & wheels, assembled, glued (2.8") (RXT orange wheels, Talon EXT tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (2) (TSM rated)

$25.95

6773G: Tires & wheels, assembled, glued (2.8") (RXT green wheels, Talon EXT tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (2) (TSM rated)

$25.95

6773R: Tires & wheels, assembled, glued (2.8") (RXT satin chrome wheels, Talon EXT tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (2) (TSM rated)

$26.95

6773X: Tires & wheels, assembled, glued (2.8") (RXT black chrome wheels, Talon EXT tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (2) (TSM rated)

$26.95

6776: Wheelie bar

$10.00

6788: Differential, front (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash®, Stampede®, Rustler®) (13/37 ratio)

$34.95

6789: Differential, rear (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash®, Stampede®, Rustler®) (13/37 ratio)

$34.95

6790: Gear adapters, fixed, Rustler® 4x4

$4.50

6792: Tires & wheels, assembled, glued (black 2.8" wheels, Sledgehammer® tires, foam inserts) (2) (TSM® rated)

$36.95

6823: Bulkhead tie bars, front & rear, aluminum (blue-anodized)

$7.00

6823G: Bulkhead tie bars, front & rear, aluminum (green-anodized)

$7.00

6823R: Bulkhead tie bars, front & rear, aluminum (red-anodized)

$7.00

6834: Suspension pin set, complete (front and rear)

$4.00

6842: Spur gear, 50-tooth (0.8 metric pitch, compatible with 32-pitch)

$3.00

6843: Spur gear, 52-tooth (0.8 metric pitch, compatible with 32-pitch)

$3.00

6845X: Steering bellcranks/ servo saver/ servo saver spring/ servo spring retainer/servo horn, steering

$12.00

6857: Springs, front (white) (progressive rate) (2)

$5.00

6858: Springs, rear (white) (progressive rate) (2)

$6.50

6860A: Motor mount (assembled with 3x6 flat-head machine screw)/ 3.0mm NL (1)

$4.00

6861: Springs, front (progressive, -20% rate, orange) (2)

$5.00

6862: Springs, front (progressive, -10% rate, green) (2)

$5.00

6863: Springs, front (progressive, +10% rate, pink) (2)

$5.00

6864: Springs, front (progressive, +20% rate, blue) (2)

$5.00

6865: Springs, rear (progressive, -20% rate, orange) (2)

$6.50

6866: Springs, rear (progressive, -10% rate, green) (2)

$6.50

6867: Springs, rear (progressive, +10% rate, pink) (2)

$6.50

6868: Springs, rear (progressive, +20% rate, blue) (2)

$6.50

6879: Ring gear, differential/ pinion gear, differential (rear)

$15.00

6879R: Ring gear, differential/ pinion gear, differential (machined, spiral cut) (rear)

$39.95

6880: Housings, differential, rear

$4.00

6881: Housings, differential, front

$4.00

6882X: Gear set, differential (output gears (2)/ spider gears (2)/ spider gear shaft, carrier support)

$15.00

6888: Drive hub, center, rear (1)/ 4x3 GS (1)

$5.00

6893: Input shaft (slipper shaft)/ bearing adapter (1)/ pin (1)

$6.50

6893X: Bearing adapter, 6061-T6 aluminum (blue-anodized) (1)/10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft)

$5.00

7429: Bulkhead, rear

$6.00

7430R: Bulkhead, front (for use only with #6723R chassis)

$6.00

7438: Linkage, steering

$4.00

7460A: Motor mount (assembled with 3x6 flat-head machine screw)/ 3.0mm NL (1)

$6.00

7460R: Motor mount, 6061-T6 aluminum (blue-anodized)

$36.95

7477: Cover, gear/ wire retainer

$3.00

7490: Plate, motor

$7.00

7490A: Plate, motor, orange

$7.00

7490G: Plate, motor, green

$7.00

7490R: Plate, motor, red

$7.00

8347: Nuts, 4mm flanged nylon locking, serrated (black) (10)

$4.00

8361: Shock caps (black) (4) (assembled with hollow balls)

$5.00

9032: Caster blocks (c-hubs), extreme heavy duty, black (left & right)/ 3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)

$7.00

9032-GRAY: Caster blocks (c-hubs), extreme heavy duty, gray (left & right)/ 3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)

$7.00

9032G: Caster blocks (c-hubs), extreme heavy duty, green (left & right)/ 3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)

$7.00

9032R: Caster blocks (c-hubs), extreme heavy duty, red (left & right)/ 3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)

$7.00

9032T: Caster blocks (c-hubs), extreme heavy duty, orange (left & right)/ 3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)

$7.00

9032X: Caster blocks (c-hubs), extreme heavy duty, blue (left & right)/ 3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)

$7.00

9037: Steering blocks, extreme heavy duty, black (left & right)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)

$6.00

9037-GRAY: Steering blocks, extreme heavy duty, gray (left & right)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)

$6.00

9037G: Steering blocks, extreme heavy duty, green (left & right)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)

$6.00

9037R: Steering blocks, extreme heavy duty, red (left & right)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)

$6.00

9037T: Steering blocks, extreme heavy duty, orange (left & right)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)

$6.00

9037X: Steering blocks, extreme heavy duty, blue (left & right)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)

$6.00

9038: Shock tower, front, extreme heavy duty, black (for use with #9080 upgrade kit)

$6.00

9038-GRAY: Shock tower, front, extreme heavy duty, gray (for use with #9080 upgrade kit)

$6.00

9038G: Shock tower, front, extreme heavy duty, green (for use with #9080 upgrade kit)

$6.00

9038R: Shock tower, front, extreme heavy duty, red (for use with #9080 upgrade kit)

$6.00

9038T: Shock tower, front, extreme heavy duty, orange (for use with #9080 upgrade kit)

$6.00

9038X: Shock tower, front, extreme heavy duty, blue (for use with #9080 upgrade kit)

$6.00

9039: Shock tower, rear, extreme heavy duty, black (for use with #9080 upgrade kit)

$6.00

9039-GRAY: Shock tower, rear, extreme heavy duty, gray (for use with #9080 upgrade kit)

$6.00

9039G: Shock tower, rear, extreme heavy duty, green (for use with #9080 upgrade kit)

$6.00

9039R: Shock tower, rear, extreme heavy duty, red (for use with #9080 upgrade kit)

$6.00

9039T: Shock tower, rear, extreme heavy duty, orange (for use with #9080 upgrade kit)

$6.00

9039X: Shock tower, rear, extreme heavy duty, blue (for use with #9080 upgrade kit)

$6.00

9042: Suspension pin set, extreme heavy duty, complete (front and rear) (3x52mm (4), 3x32mm (2), 3x40mm (2)) (for use with #9080 upgrade kit)

$4.00

9042X: Suspension pin set, extreme heavy duty, complete (front and rear) (hardened steel) (3x52mm (4), 3x32mm (2), 3x40mm (2))/ M2.5x0.45mm NL (8) (for use with #9080 upgrade kit)

$15.00

9043: Screw pins, 3x16mm, extreme heavy duty (6) (for use with #9080 upgrade kit)

$4.00

9050: Carriers, stub axle, rear, extreme heavy duty, black (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)

$6.00

9050-GRAY: Carriers, stub axle, rear, extreme heavy duty, gray (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)

$6.00

9050G: Carriers, stub axle, rear, extreme heavy duty, green (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)

$6.00

9050R: Carriers, stub axle, rear, extreme heavy duty, red (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)

$6.00

9050T: Carriers, stub axle, rear, extreme heavy duty, orange (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)

$6.00

9050X: Carriers, stub axle, rear, extreme heavy duty, blue (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)

$6.00

9051: Driveshaft assembly, front, extreme heavy duty with 6mm axle (1)/ screw pin (1) (left or right) (fully assembled, ready to install) (for use with #9080 upgrade kit)

$14.00

9051R: Driveshafts, front, extreme heavy duty, steel-spline constant-velocity with 6mm stub axles (complete assembly) (2) (for use with #9080 upgrade kit)

$79.95

9052: Driveshaft assembly, rear, extreme heavy duty with 6mm axle (1)/ screw pin (1) (left or right) (fully assembled, ready to install) (for use with #9080 upgrade kit)

$14.00

9052R: Driveshafts, rear, extreme heavy duty, steel-spline constant-velocity with 6mm stub axles (complete assembly) (2) (for use with #9080 upgrade kit)

$79.95

9055: Stub axle assembly, rear, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft) (for use with #9080 upgrade kit)

$8.00

9056: Stub axle assembly, front, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft) (for use with #9080 upgrade kit)

$8.00

9057: Differential output yoke assembly, extreme heavy duty (2) (left or right, front or rear) (assembled with external-splined half shaft) (for use with #9080 upgrade kit)

$10.00

9069: Wheel hubs, 12mm hex (steel), extreme heavy duty (4)/ 2x9.8mm pin (4) (for use with #9080 upgrade kit and 6mm axles)

$10.00

Rustler 4X4 Brushless (67164-4) Front Assembly Exploded View

Rustler 4X4 Brushless (67164-4) Body Assembly Exploded View

Rustler 4X4 Brushless (67164-4) Chassis Assembly Exploded View

Rustler 4X4 Brushless (67164-4) Driveshafts Assembly Exploded View

Rustler 4X4 Brushless (67164-4) Front Assembly Exploded View

Rustler 4X4 Brushless (67164-4) Rear Assembly Exploded View

Rustler 4X4 Brushless (67164-4) Transmission Assembly Exploded View

View PDF

Enter your email address to Subscribe.