Rustler (37054-4) Front Assembly Exploded View

1654: Wheel hubs, hex (2)/ stub axle pins (2)

$2.00

1664: Shock shafts, steel, chrome finish (long) (2)

$3.00

1664T: Shock shafts, hardened steel, titanium nitride coated (long) (2)

$10.00

1675: Bushings, self-lubricating (5x11x4mm) (14)

$5.00

1726: Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)

$1.00

1747: Nuts, 4mm nylon locking (10)

$2.00

1747G: Nuts, aluminum, flanged, serrated (4mm) (green-anodized) (4)

$7.50

1747P: Nuts, 4mm flanged nylon locking (aluminum, pink anodized) (4)

$7.50

1747R: Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4)

$7.50

1765: Silicone diaphragms (4)

$2.00

1834: Body clips (12) (standard size)

$2.00

1926: Antenna caps, vinyl (2)/ antenna spool

$2.00

1942: Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2)

$7.00

1951: Half shafts, long truck (external-splined (2) & internal-splined (2)/ metal U-joints (4)

$6.00

1951R: Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2) (fits 2WD Rustler®/Stampede®)

$69.95

1953: Half shaft pro-pack (internal-splined (6)/ external-splined (6) (plastic shafts only)

$10.00

1985: PTFE-coated Washers, 5x8x0.5mm (20) (use with ball bearings)

$2.00

2056: Servo, high-torque, waterproof (blue case)

$33.95

2075: Servo, digital high-torque (ball bearing), waterproof

$39.95

2362: Shock rebuild kit (for 2 shocks)

$2.50

2380: Differential, complete (fits 1/10-scale 2WD Rustler®, Bandit, Stampede®, Slash®)

$14.95

2381X: Main diff with steel ring gear/ side cover plate/ screws (Bandit, Stampede®, Rustler®)

$6.00

2382: Planet gears (4)/ planet shafts (4)/ sun gears (2)/sun gear alignment shaft (1) all hardened steel

$6.00

2388X: Planetary gear differential with steel ring gear (complete) (fits Bandit, Stampede®, Rustler®)

$15.00

2416: Gear, 16-T pinion (48-pitch) / set screw

$3.50

2419: Gear, 19-T pinion (48-pitch) / set screw

$3.00

2458A: Springs (front) (white) (2)

$4.00

2458P: Springs (front) (pink) (2)

$4.00

2530: Bulkhead (front) (black)

$6.00

2530A: Bulkhead (front) (grey)

$6.00

2537: 3mm threaded rods: 1 each of 20mm,25mm&44mm

$2.50

2545: Bushings (plastic) (5x8x2.5mm) (4)

$3.00

2548: Screws, 4x12mm countersunk machine (100-degree) (6)

$1.50

2554: Screws, 3x6mm caphead machine (hex drive) (6)

$2.50

2558: Screws, 3x6mm roundhead machine (6)

$1.50

2563: Screws, 3x15mm roundhead machine (6)

$1.50

2566: Screws, 3x20mm roundhead machine (6)

$1.50

2567: Screws, 3x23mm roundhead machine (6)

$1.50

2572: Screws, 3x30mm roundhead machine (6)

$1.50

2587: Screws, 3x10mm caphead machine (6) (no washer)

$2.50

2593: Screws, 3x14mm button-head machine (hex drive) (6)

$3.00

2648: Screws, 3x12mm countersunk self-tapping (6)

$1.50

2649: Screws, 3x15mm countersunk self-tapping (6)

$1.50

2656: Shock shafts, steel, chrome finish (xx-long) (2)

$3.00

2656T: Shock shafts, hardened steel, titanium nitride coated (xx-long) (2)

$10.00

2660: Big-bore shocks (long) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts) w/o springs (2)

$26.95

2662: Big-bore shocks (xx-long) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts) w/o springs (rear) (2)

$26.95

2675: Screws, 3x10mm roundhead self-tapping (6)

$1.50

2676: Screws, 3x12mm roundhead self-tapping (6)

$1.50

2735: Bumper (front)

$3.00

2735P: Bumper (front) (pink)

$3.00

2742: Rod ends, long (6)/ hollow ball connectors (6)

$4.00

2742X: Rod ends, short (6)/ hollow balls (6)

$4.00

2743: Set (grub) screws, 3mm hardened (12)

$3.00

2745: Nuts, 3mm nylon locking (12)

$2.00

2746: Washers, 3x6mm metal (12)

$1.50

2753X: Stub axles, rear (2)

$5.00

2754: Stub axle pins (4)

$1.00

3018R: XL-5 Electronic Speed Control, waterproof (land version, low-voltage detection, fwd/rev/brake)

$59.95

3139: Turnbuckles (62mm) (front tie rods) (2)

$2.00

3139A: Turnbuckles, aluminum (blue-anodized), toe links, 59mm (2) (assembled w/ rod ends & hollow balls) (requires 5mm aluminum wrench #5477)

$12.00

3139X: Turnbuckles, aluminum (red-anodized), toe links, 59mm (2) (assembled with rod ends & hollow balls) (requires 5mm aluminum wrench #5477)

$12.00

3167: Screws, 4x15mm countersunk machine (6)

$1.50

3185X: Screws, 3x8mm washerhead machine (large head for motor mount) (6)

$1.50

3186: Screws, 3x12mm washerhead machine (6)

$1.50

3187: Screws, 3x15mm washerhead machine (6)

$1.50

3195: Top drive gear, steel (22-tooth)

$3.00

3286: Screws, 3x12mm washerhead self-tapping (6)

$1.50

3288: Screw, 3x15mm washerhead self-tapping (6)

$1.50

3290: Screws, 3x8mm washerhead self-tapping (6)

$1.50

3628: Box, receiver (sealed)/ foam pad/2.5x8mm CS (4)/ 3x10mm CS (2)

$12.00

3629: Seal kit, receiver box (includes o-ring, seals, and silicone grease)

$4.00

3631: Suspension arms (front) (2)

$8.00

3631A: Suspension arms, blue, front, heavy duty (2)

$10.00

3631G: Suspension arms, green, front, heavy duty (2)

$10.00

3631R: Suspension arms, red, front, heavy duty (2)

$10.00

3631T: Suspension arms, orange, front, heavy duty (2)

$10.00

3631X: Suspension arms, black, front, heavy duty (2)

$10.00

3632: Caster blocks (l&r) (30-degree)

$4.00

3632A: Caster blocks, 30-degree, blue-anodized 6061-T6 aluminum (left & right)/ suspension screw pin (2)

$19.95

3632G: Caster blocks, 30-degree, green-anodized 6061-T6 aluminum (left & right)/ suspension screw pin (2)

$19.95

3632P: Caster blocks, 30-degree, pink-anodized 6061-T6 aluminum (left & right)/ suspension screw pin (2)

$19.95

3632X: Caster blocks, 30-degree, red-anodized 6061-T6 aluminum (left & right)/ suspension screw pin (2)

$19.95

3636A: Steering blocks, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (blue-anodized)/ 5x11mm ball bearings (4)

$29.95

3636G: Steering blocks, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (green-anodized)/ 5x11mm ball bearings (4)

$29.95

3636P: Steering blocks, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (pink-anodized)/ 5x11mm ball bearings (4)

$29.95

3636X: Steering blocks, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (red-anodized)/ 5x11mm ball bearings (4)

$29.95

3637: Axles (front) (2)

$3.00

3638: Shock tower (rear)

$4.50

3639: Shock tower (front)

$4.00

3641A: Camber link set (plastic / non-adjustable ) ( front & rear) (gray)

$3.00

3642: Attachment screws, shock (3x12mm shoulder screws) (6)

$3.00

3647: Nuts, 4mm flanged nylon locking (steel, serrated) (8)

$3.25

3652A: Stub axle carriers, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (blue-anodized)/ 5x11mm ball bearings (4)

$29.95

3652G: Stub axle carriers, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (green-anodized)/ 5x11mm ball bearings (4)

$29.95

3652P: Stub axle carriers, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (pink-anodized)/ 5x11mm ball bearings (4)

$29.95

3652X: Stub axle carriers, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (red-anodized)/ 5x11mm ball bearings (4)

$29.95

3654: Wheel hubs, hex (front) (tall offset) (2)/ axle pins (2.5x10mm) (2)

$3.00

3655X: Suspension arms, left & right

$10.00

3672: Wheels, chrome (2.2'') (rear) (2)

$5.95

3673: Wheels, chrome 2.2" (front) (2)

$5.95

3674: Wheels, dyable nylon 2.2" (rear) (2)

$3.95

3675: Wheels, dyeable nylon 2.2 (front) (2)

$3.95

3691: Gearbox halves (l&r) (black) w/ idler gear shaft

$8.00

3691A: Gearbox halves (L&R) (grey) w/ idler gear shaft

$8.00

3695: Transmission, complete (fits 1/10-scale 2WD Rustler®, Bandit®, Stampede®, Slash®)

$79.95

3696: Idler gear, steel (30-tooth)

$3.00

3722R: Lower chassis (grey) (166mm long battery compartment) (fits both flat and hump style battery packs) (use only with #3725R ESC mounting plate)

$15.00

3722X: Lower chassis (black) (166mm long battery compartment) (fits both flat and hump style battery packs)(use only with #3725R ESC mounting plate)

$15.00

3723: Upper chassis (black)

$5.00

3723A: Upper chassis (grey)

$5.00

3725R: Mounting plate, electronic speed control (for installation of XL-5/VXL into Bandit or Rustler®)

$3.00

3725X: Battery expansion kit (allows for installation of taller multi-cell battery packs) (Rustler®, Bandit, Stampede®)

$6.00

3727: Battery hold-down plate (black)/ metal posts (2)/body clips (2)

$3.00

3727A: Battery hold-down plate (grey) / metal posts (2) / body clips (2)

$3.00

3736: Steering blocks, left & right (2) (requires 5x11x4mm bearings)

$3.00

3739: Screw pin set (Rustler®/ Bandit/ Stampede®)

$4.50

3740: Suspension pins, 2.5x31.5mm (king pins) w/ E-clips (2) (strengthens caster blocks)

$2.50

3742: Shoulder screws, steering bellcranks (3x30mm cap-head machine) (2)/ draglink shoulder screws (chrome) (2)

$2.00

3743: Steering bellcranks (l&r)/ draglink

$4.00

3743A: Steering bellcranks, drag link (blue-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled)

$29.95

3743P: Steering bellcranks, drag link (pink-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled)

$29.95

3743X: Steering bellcranks, drag link (red-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled)

$29.95

3744: Servo saver w/ adapters

$4.00

3745: Turnbuckles, toe link, 59mm (78mm center to center) (2) (assembled with rod ends and hollow balls)

$8.75

3752: Stub axle carriers (2) (requires 5x11x4mm bearings)

$3.00

3757P: Springs, pink (rear) (2)

$4.00

3757X: Springs, white (rear) (2)

$4.00

3760A: Ultra Shocks (grey) (long) (complete w/ spring pre-load spacers & springs) (2)

$18.00

3762A: Ultra Shocks (grey) (xx-long) (complete w/ spring pre-load spacers & springs) (rear) (2)

$18.00

3765A: Body, Ultra Shock (long) (grey) (2)

$3.00

3766A: Body, Ultra Shock (XXL) (grey) (2)

$3.00

3767: Shock caps (2)/ shock bottoms (2)

$3.00

3768: Spring retainers, upper & lower (2)/ piston head set (2-hole (2)/ 3-hole (2))

$3.00

3769: Spring pre-load spacers: 1mm (4)/ 2mm (2)/ 4mm (2)/ 8mm (2)

$4.00

3770: Tires & wheels, assembled, glued (2.8") (All-Star chrome wheels, Alias® tires, foam inserts) (electric rear) (2)

$25.95

3770A: Tires & wheels, assembled, glued (2.8") (All-Star black chrome wheels, Alias® tires, foam inserts) (rear) (2) (TSM® rated)

$26.95

3771: Tires & wheels, assembled, glued (2.8") (All-Star chrome wheels, Ribbed tires, foam inserts) (front) (2)

$25.95

3771A: Tires & wheels, assembled, glued (2.8")(All-Star black chrome wheels, Ribbed tires, foam inserts) (electric front) (2)

$26.95

3772: Wheels, All-Star 2.8" (chrome) (Rustler®, Stampede® rear only)

$7.95

3772A: Wheels, All-Star 2.8" (black chrome) (electric rear)

$8.95

3773: Tires & wheels, assembled, glued (All Star chrome wheels, Anaconda® tires, foam inserts) (electric rear) (1 Left, 1 Right)

$27.95

3773A: Tires & wheels, assembled, glued (All Star black chrome wheels, Anaconda® tires, foam inserts) (electric rear) (1 left, 1 right)

$29.95

3776A: Tires & wheels, assembled, glued (All-Star black chrome wheels, Anaconda® tires, foam inserts) (nitro rear/ electric front) (1 left, 1 right)

$29.95

3785: Motor, Titan® 12T (12-Turn, 550 size)

$25.95

3790: Gear adapter, fixed

$4.50

3792: Cover, gear/ rubber gear cover plug/ 3x6 RM (2)

$3.50

3793: Input shaft (slipper shaft) / spring pin

$3.00

3965: Screws, 2.5x8mm cap-head machine (6)

$2.50

4628: Differential output yokes (2)/ 3x5mm countersunk screws (2)/ 3mm set (set) screws (4)

$4.00

4628X: Differential output yokes, hardened steel (w/ U-joints) (2)

$19.50

4676: Spur gear, 76-tooth (48-pitch) (for models with Torque Control slipper clutch)

$3.00

4683: Spur gear, 83-tooth (48-pitch) (for models with Torque Control slipper clutch)

$3.00

4686: Spur gear, 86-tooth (48-pitch) (for models with Torque-Control slipper clutch)

$3.00

4690: Spur gear, 90-tooth (48-pitch) (for models with Torque-Control slipper clutch)

$3.00

4728: Gear, 28-T pinion (48-pitch) (fits 3mm shaft)/ set screw

$3.00

4790R: Tires, Spiked 2.2 (R(2) (Soft Compound) w/inserts

$17.49

5114: Ball bearings, blue rubber shield (5x8x2.5mm) (2)

$4.00

5116: Ball bearings, blue rubber sealed (5x11x4mm) (2)

$3.50

5529: Shim set, 3x7x1mm (2), 3x6x0.5mm (4), 3x7x2mm (2)/ hollow balls, captured (4)

$3.50

5552X: Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/ pin/ 4.0mm NL (1)/ 5.0mm NL (1))

$10.00

5556: Slipper pressure plate & hub (aluminum alloy)

$8.00

5563: Tires, Ribbed 2.8" (2)/ foam inserts (2)

$18.95

5569: Tires, Alias® 2.8" (2)/ foam inserts (2)

$18.95

5576: Wheels, All-Star 2.8" (chrome) (nitro rear / electric front) (2)

$7.95

5576A: Wheels, All-Star 2.8" (black chrome) (nitro rear / electric front) (2)

$8.95

5576R: Tires & wheels, assembled, glued (All-Star chrome wheels, Anaconda® tires, foam inserts) (nitro rear/ electric front) (1 left, 1 right)

$26.95

5578: Tires, Anaconda® 2.8" (2)/ foam inserts (2)

$18.95

6519: Receiver, micro, TQ 2.4GHz (3-channel)

$29.95

6773: Tires & wheels, assembled, glued (2.8") (RXT black wheels, Talon EXT tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (2) (TSM rated)

$25.95

6774A: Tires & wheels, assembled, glued (2.8") (RXT orange wheels, Talon EXT tires, foam inserts) (2WD electric rear) (2) (TSM® rated)

$25.95

6774G: Tires & wheels, assembled, glued (2.8") (RXT green wheels, Talon EXT tires, foam inserts) (2WD electric rear) (2) (TSM® rated)

$25.95

6774R: Tires & wheels, assembled, glued (2.8") (RXT satin chrome wheels, Talon EXT tires, foam inserts) (2WD electric rear) (2) (TSM® rated)

$26.95

6774X: Tires & wheels, assembled, glued (2.8") (RXT black chrome wheels, Talon EXT tires, foam inserts) (2WD electric rear) (2) (TSM® rated)

$26.95

6845X: Steering bellcranks/ servo saver/ servo saver spring/ servo spring retainer/servo horn, steering

$12.00

8361: Shock caps (black) (4) (assembled with hollow balls)

$5.00

Rustler (37054-4) Front Assembly Exploded View

Rustler (37054-4) Chassis Assembly Exploded View

Rustler (37054-4) Front Assembly Exploded View

Rustler (37054-4) Rear Assembly Exploded View

Rustler (37054-4) Transmission Assembly Exploded View

View PDF

Enter your email address to Subscribe.