Nitro Slash (#44054) - Rear Assembly

1633: E-clips/ C-rings

$2.00

1654: Wheel hubs, hex (2)/ stub axle pins (2)

$2.00

1739: Suspension screw pin set

$4.50

1747: Nuts, 4mm nylon locking (10)

$2.00

1747G: Nuts, aluminum, flanged, serrated (4mm) (green-anodized) (4)

$7.50

1747R: Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4)

$7.50

1951: Half shafts, long truck (external-splined (2) & internal-splined (2)/ metal U-joints (4)

$6.00

1952: Carriers, stub axle (rear) (2)

$3.00

1952X: Carriers, stub axle (blue-anodized 6061-T6 aluminum) (rear) (left & right)/ 3x32mm hinge pins (2)/ e-clips (6)/ hardware

$25.95

1985: PTFE-coated Washers, 5x8x0.5mm (20) (use with ball bearings)

$2.00

2382: Planet gears (4)/ planet shafts (4)/ sun gears (2)/sun gear alignment shaft (1) all hardened steel

$6.00

2539: Aluminum spacers: 3x6x1.5mm (2)/ 3x6x2.5mm (1)/ 3x6x3.8mm (2)

$2.50

2542: Screws, 4x12mm countersunk machine (hex drive) (6)

$2.50

2555: Suspension arms, (rear) (2)

$10.00

2558: Screws, 3x6mm roundhead machine (6)

$1.50

2563: Screws, 3x15mm roundhead machine (6)

$1.50

2565: Screws, 3x18mm roundhead machine (6)

$1.50

2566: Screws, 3x20mm roundhead machine (6)

$1.50

2569: Screws,3x25mm roundhead machine (6)

$1.50

2578: Screws, 3x12mm button-head machine (hex drive) (6)

$2.50

2590: Screws, 3x20mm countersunk machine screws (6)

$1.50

2673: Screws, 2.6x10mm roundhead self-tapping (6)

$1.50

2742: Rod ends, long (6)/ hollow ball connectors (6)

$4.00

2743: Set (grub) screws, 3mm hardened (12)

$3.00

2746: Washers, 3x6mm metal (12)

$1.50

2754: Stub axle pins (4)

$1.00

2797: Mounts, suspension arm (rear) (0-degree) (l&r)

$2.00

2798: Mount,suspension arm (rear) (+/- 1-degree)(l&r)

$2.00

2798A: Mounts, suspension arm (rear) (+/- 1-degree) (l&r) (grey)

$2.00

2798X: Mounts, susp arm, machined aluminum (R) (+/-1) degree

$20.00

3147: Fuel line (1 foot)

$1.75

3155: Cable ties, medium black (6)

$2.25

3177: Screws, 3x10mm countersunk machine (6)

$1.50

3182: Collars, screw (2)/ grub screws, 3mm (2)

$2.50

3281: Cone, split beveled

$3.00

3296: Inlet Fittings (2)

$2.75

3642: Attachment screws, shock (3x12mm shoulder screws) (6)

$3.00

3644: Turnbuckles, camber link, 39mm (69mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)

$7.00

3739: Screw pin set (Rustler®/ Bandit/ Stampede®)

$4.50

3934: Body clips, heavy duty (12)

$3.00

3982: Washer, PTFE-coated 6x8x0.5 (10)

$1.25

4118: Clutch bell (18-tooth)/5x8x0.5mm fiber washer (2)/ 5mm e-clip (requires 5x10x4mm ball bearings part 4609)

$12.00

4120: Clutch bell (20-tooth)/5x8x0.5mm fiber washer (2)/ 5mm e-clip (requires 5x11x4mm ball bearings part 4611)

$12.00

4122: Clutch bell (22-tooth)/5x8x0.5mm fiber washer (2)/ 5mm e-clip (requires 5x11x4mm ball bearings part 4611)

$12.00

4142: Flywheel (N. Rustler®/Sport/Stampede®/T-Maxx®/Revo®)

$7.50

4146: Clutch shoes (2)/ spring (N. Rustler®/N.Sport/N.Stampede®)

$7.25

4146X: Clutch shoes (2)/ spring

$7.75

4181: Differential gear (45-tooth)/ side cover plate & screws

$3.50

4184: Brake brackets (inner & outer)

$2.00

4192: Bulkhead (rear)

$3.00

4428: EZ-Start® mount/ clamp/ 2.6x10mm RST (4)

$4.00

4429: Bumper (rear)/ battery box/ battery box cover/ switch cover/ body clip/ 3x15mm RM (2)/ 3x12mm CM (2)

$12.00

4434A: Gearbox brace/ clutch guard (grey)

$3.00

4464: Brake disc, composite/ brake adapter

$3.00

4470: Spur gear (70-tooth) (32-Pitch) w/bushing

$3.00

4472: Spur gear (72-tooth) (32-Pitch) w/bushing

$3.00

4483: Throttle & brake rods/brake lever

$2.50

4491A: Gearbox halves (grey) (left & right)

$5.00

4493: Top drive gear (16-tooth)/ slipper shaft

$4.50

4494: Slipper tension spring (high rate)/ spur gear bushing & locknut

$2.50

4496: Idler gear, steel (20-tooth)

$3.50

4579: Connector, wiring harness (EZ-Start® and EZ-Start® 2)

$5.00

4581: Lead wire, glow plug (blue) (EZ-Start® and EZ-Start® 2)

$1.75

4581X: Lead wire, glow plug (blue) (EZ-Start® and EZ-Start® 2)/ molex pin extractor (use where glow plug wire does not have bullet connector)

$1.75

4607: Ball bearings (5x11x4mm) (8)

$24.00

4611: Ball bearings (5x11x4mm) (2)

$6.00

4622: Pressure rings, slipper (notched) (2)

$2.50

4625: Pressure plate, slipper (1)

$5.00

4628X: Differential output yokes, hardened steel (w/ U-joints) (2)

$19.50

4685: Friction pegs, slipper (12)

$4.50

5116: Ball bearings, blue rubber sealed (5x11x4mm) (2)

$3.50

5142: Screws, 3x15mm caphead machine (hex drive) (with split and flat washers) (6)

$2.75

5169: Screws, 2.6x8mm countersunk machine (6) (EZ Start 2 motor)

$2.00

5211R: Roller clutch/ 6x8x0.5 TW (1) (also called one-way bearing) (TRX® 2.5, 2.5R, 3.3)

$22.50

5244: Flywheel nut (TRX® 2.5 and 2.5R)

$4.25

5246: Pipe coupler, molded (for use with pipes 5152 (T-Maxx®) & 4452R) (TRX® 2.5, 2.5R, 3.3)

$1.75

5256: O-ring, header 12.2x1mm (TRX® 2.5)

$1.20

5262: Air filter and pre-filter inserts, foam (high-volume) (3) (pre-oiled, assembled) (use with #5266 filter body) (TRX® 2.5, 2.5R, 3.3)

$10.00

5268: Air filter body (high volume)/ filter support/ cap/ foam filter, pre-filter/ air filter base/ wire mount/ hardware (1 each)

$12.00

5270R: EZ-Start® 2, complete system with controller, drive unit, wiring harness

$49.95

5273: Cush-drive elements (4) (EZ Start 2)

$2.50

5275: Housing set (inner, outer)/ 3x12mmBCS (5)/ 3x20BCS (1)/ motor bushing (EZ-Start® 2)

$7.50

5276: Gear set (complete) (EZ-Start® 2)

$9.00

5279: Motor (hi-torque)/ pinion gear/ motor bushing (EZ-Start® 2)

$15.00

5280: Control box (complete) (EZ-Start® 2)

$15.00

5281: Control box battery cover w/ belt clip (EZ Start 2)

$4.00

5282: Screws, 3x12mm button-head machine (6) (Starter attachment screws w/ threadlock)

$3.00

5287: Header, blue-anodized aluminum (for rear exhaust engines only) (TRX® 2.5, 2.5R, 3.3)

$20.00

5296: Pressure fitting, 90-degree

$4.00

5483: Tuned pipe, Resonator®, R.O.A.R. legal (single-chamber, enhances low to mid-rpm power) (for Jato®, N. Rustler®, N. 4-Tec® with TRX® Racing Engines)

$46.95

5485: Tuned pipe, Resonator®, R.O.A.R. legal (dual-chamber, enhances mid to high-rpm power) (for Jato®, N. Rustler®, N. 4-Tec® with TRX® Racing Engines)

$49.95

5525: Rod ends (12)/ hollow balls (12)

$9.00

5529: Shim set, 3x7x1mm (2), 3x6x0.5mm (4), 3x7x2mm (2)/ hollow balls, captured (4)

$3.50

5541X: Tuned pipe, Resonator®, R.O.A.R. legal, blue-anodized (aluminum, single chamber) (fits Jato®, N. Rustler®, N. 4-Tec®, with TRX® Racing Engines)

$39.95

6542: Flywheel with magnet (35mm)

$8.00

6828X: Differential output yokes, heavy duty (2)/ screw pin (2)

$4.00

6850X: Half shafts, heavy duty (external splined (2)/ internal splined (2))/ metal u-joints (4)

$8.00

6852X: Driveshaft assembly, rear, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

$10.00

6853X: Stub axles, rear, heavy duty (2)/pins (2)

$6.00

Nitro Slash (#44054) - Rear Assembly

View PDF

Enter your email address to Subscribe.