Nitro 4-Tec (48077) Front Assembly

1552: 3x8mm Hex Cap Screws (6)/ Washers (6)/ Wrench (1)

$3.00

1633: E-clips/ C-rings

$2.00

1654: Wheel hubs, hex (2)/ stub axle pins (2)

$2.00

1654X: Wheel hubs, hex (blue-anodized, lightweight aluminum) (2)/ axle pins(2)

$9.00

1726: Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)

$1.00

1747: Nuts, 4mm nylon locking (10)

$2.00

1747R: Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4)

$7.50

1765: Silicone diaphragms (4)

$2.00

1926: Antenna caps, vinyl (2)/ antenna spool

$2.00

1942: Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2)

$7.00

2055: Servo, high-torque

$24.95

2056: Servo, high-torque, waterproof (blue case)

$33.95

2070: Servo, digital high-torque (ball bearing)

$34.95

2075: Servo, digital high-torque (ball bearing), waterproof

$39.95

2362: Shock rebuild kit (for 2 shocks)

$2.50

2382: Planet gears (4)/ planet shafts (4)/ sun gears (2)/sun gear alignment shaft (1) all hardened steel

$6.00

2545: Bushings (plastic) (5x8x2.5mm) (4)

$3.00

2550: Screws, 3x8mm countersunk machine (6) (hex drive)

$2.50

2551: Screws, 3x10mm countersunk machine (6) (hex drive)

$2.50

2552: Screws, 3x12mm countersunk machine (6) (hex drive)

$2.50

2553: Screws, 3x15mm countersunk machine (6) (hex drive)

$2.50

2557: Screws, 3x30mm cap-head machine (hex drive) (6)

$2.50

2576: Screws, 3x8mm button-head machine (hex drive) (6)

$2.50

2577: Screws, 3x10mm button-head machine (hex drive) (6)

$2.50

2578: Screws, 3x12mm button-head machine (hex drive) (6)

$2.50

2579: Screws, 3x15mm button-head machine (hex drive) (6)

$2.50

2582: Screws, 3x30mm button-head machine (hex drive) (6)

$2.50

2587: Screws, 3x10mm caphead machine (6) (no washer)

$2.50

2669: Piston head set (2-hole (2)/ 3-hole (2))/ shock mounting bushings & washers (2) (Big Bore Shocks)

$2.50

2715: Servo mounts (2)/ screws (6)

$2.50

2728: Ball bearings (5x8x2.5mm) (2)

$8.00

2742: Rod ends, long (6)/ hollow ball connectors (6)

$4.00

2742X: Rod ends, short (6)/ hollow balls (6)

$4.00

2743: Set (grub) screws, 3mm hardened (12)

$3.00

2744: Nuts, 3mm flanged (12)

$3.00

2745: Nuts, 3mm nylon locking (12)

$2.00

2746: Washers, 3x6mm metal (12)

$1.50

2754: Stub axle pins (4)

$1.00

3147: Fuel line (1 foot)

$1.75

3147X: Fuel line (610mm or 2ft)

$3.50

3155: Cable ties, medium black (6)

$2.25

3170X: Battery holder, 4-cell / on-off switch

$5.00

3180: Guide, rod (2)/ nuts (2)

$2.25

3182: Collars, screw (2)/ grub screws, 3mm (2)

$2.50

3232X: Glow plug, super-duty (long-medium)/gasket

$9.95

3281: Cone, split beveled

$3.00

3744: Servo saver w/ adapters

$4.00

3767: Shock caps (2)/ shock bottoms (2)

$3.00

3767A: Shock caps, aluminum (blue-anodized) (4) (fits all Ultra Shocks)

$14.00

3767G: Shock caps, aluminum (green-anodized) (4) (fits all Ultra Shocks)

$14.00

3767X: Shock caps, aluminum (red-anodized) (4) (fits all Ultra Shocks)

$14.00

3768: Spring retainers, upper & lower (2)/ piston head set (2-hole (2)/ 3-hole (2))

$3.00

3769: Spring pre-load spacers: 1mm (4)/ 2mm (2)/ 4mm (2)/ 8mm (2)

$4.00

3932: Screws, 3x6mm flat-head machine (hex drive) (6)

$2.50

4146: Clutch shoes (2)/ spring (N. Rustler®/N.Sport/N.Stampede®)

$7.25

4182: Servo horn, throttle-brake/ shift (1)

$2.50

4214: Front body mounting posts (2) w/ screws

$2.50

4262: Shock shaft, hard chrome (32mm) (rear) (2)

$3.00

4262T: Shock shafts, hardened steel, titanium nitride coated (32mm) (2)

$10.00

4317: Shock tower, rear

$3.00

4352: Stub axle carriers, rear (1.5 degree toe in) (l&r)

$3.00

4448: Fuel tank(75cc)/rubber vibration cushions

$12.00

4449: Fuel tank cap (new style)/ seal/ screw/ spring and screw pin

$4.00

4453: Pipe hanger

$2.00

4609: Ball bearings (5x10x4mm) (2) (metal shielded, for clutch bell)

$8.00

4628: Differential output yokes (2)/ 3x5mm countersunk screws (2)/ 3mm set (set) screws (4)

$4.00

4628X: Differential output yokes, hardened steel (w/ U-joints) (2)

$19.50

4825: Stiffeners, chassis (l&r)

$5.00

4827: Bearing block, front (supports front shaft)/belt tension adjustment shims (front/ middle)/ screws

$6.00

4850: Suspension arms, rear (l&r)

$5.00

4857: Screw, 3x20 countersunk machine (hex drive) (6)

$2.50

4858: Screw, 3x25 countersunk machine (hex drive) (6)

$2.50

4859: CS 3x10 flathead (hex drive)

$1.75

4860: Engine mount, screws (Nitro 4-Tec)

$8.00

4864: Belt, front drive (4.5mm width, 78-groove HTD)

$7.50

4865: Belt, rear drive (6.0mm width, 52-groove HTD)

$7.50

4873: Tires, Pro-Trax on-road (medium compound with contoured inserts) (mounted and glued to part #4872 wheels) (2 left, 2 right)

$34.95

4887: Gear 1st (optional) (45-tooth)

$4.00

4889: Ball bearing(1) (10x19x5)

$4.50

4895: Pulleys, 20-groove (middle) (2)/ flanges (2) axle pins (2)

$6.00

5116: Ball bearings, blue rubber sealed (5x11x4mm) (2)

$3.50

5119: Ball bearings, blue rubber sealed (10x15x4mm) (2)

$7.00

5142: Screws, 3x15mm caphead machine (hex drive) (with split and flat washers) (6)

$2.75

5228: Head protector, cooling head (1)/3x6mm CCS (5) (TRX® 3.3)

$3.00

5238R: Cooling head, PowerTune (machined aluminum, blue- anodized) (TRX® 3.3), head protector (1), 3x6mm CCS (5)

$39.95

5246: Pipe coupler, molded (for use with pipes 5152 (T-Maxx®) & 4452R) (TRX® 2.5, 2.5R, 3.3)

$1.75

5256: O-ring, header 12.2x1mm (TRX® 2.5)

$1.20

5260: Air filter housing/ foam insert/ straight base/ angled base/ cable tie (1-each) (TRX® 2.5, 2.5R, 3.3)

$12.00

5287: Header, blue-anodized aluminum (for rear exhaust engines only) (TRX® 2.5, 2.5R, 3.3)

$20.00

5367: Pull ring (2), fuel tank cap (1)/ engine shut-off clamp (1)

$3.00

5407: TRX 3.3 Engine IPS Shaft w/ Recoil Starter

$219.95

5483: Tuned pipe, Resonator®, R.O.A.R. legal (single-chamber, enhances low to mid-rpm power) (for Jato®, N. Rustler®, N. 4-Tec® with TRX® Racing Engines)

$46.95

5485: Tuned pipe, Resonator®, R.O.A.R. legal (dual-chamber, enhances mid to high-rpm power) (for Jato®, N. Rustler®, N. 4-Tec® with TRX® Racing Engines)

$49.95

5526: Antenna crimp nut, aluminum (blue-anodized)/ antenna nut tool

$4.00

5541X: Tuned pipe, Resonator®, R.O.A.R. legal, blue-anodized (aluminum, single chamber) (fits Jato®, N. Rustler®, N. 4-Tec®, with TRX® Racing Engines)

$39.95

6536: Mounts, RPM sensor (nitro engines)/ 3x10 CS with split and flat washers (2)

$4.00

6542: Flywheel with magnet (35mm)

$8.00

Nitro 4-Tec (48077) Front Assembly

View PDF

Enter your email address to Subscribe.