Maxx® (89086-4) Chassis Assembly Exploded View

1726: Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)

$1.00

1726A: Antenna, tube, black (1)/ vinyl antenna cap (1)/ wire retainer (1)

$2.00

1926: Antenna caps, vinyl (2)/ antenna spool

$2.00

2090: Servo, digital high-torque (ball bearing), waterproof

$49.95

2535: Screws, 4x10mm countersunk machine (hex drive) (6)

$2.50

2550: Screws, 3x8mm countersunk machine (6) (hex drive)

$2.50

2551: Screws, 3x10mm countersunk machine (6) (hex drive)

$2.50

2553: Screws, 3x15mm countersunk machine (6) (hex drive)

$2.50

2577: Screws, 3x10mm button-head machine (hex drive) (6)

$2.50

2578: Screws, 3x12mm button-head machine (hex drive) (6)

$2.50

2579: Screws, 3x15mm button-head machine (hex drive) (6)

$2.50

2581: Screws, 3x25mm button-head machine (hex drive) (6)

$2.50

2582: Screws, 3x30mm button-head machine (hex drive) (6)

$2.50

2583: Screws, 3x18 button-head machine (hex drive) (6)

$2.50

2584: Head screws, 3x12mm cap-head machine (hex drive) (6) (TRX® 2.5, 2.5R, 3.3)

$2.50

2587: Screws, 3x10mm caphead machine (6) (no washer)

$2.50

2595: Screws, 4x35mm button-head machine (hex drive) (6)

$3.00

2596: Screws, 4x25mm button-head machine (hex drive) (6)

$3.00

2597: Screws, 4x22mm button-head machine (hex drive) (6)

$3.00

3229: Screws, 2.5x10mm cap-head machine (hex drive) (6)

$2.50

3236: Screws, 2.5x12mm cap-head machine (6)

$2.50

3461: Motor, Velineon® 540XL, 2400Kv 70mm, brushless (assembled with 6.5mm gold-plated bullet connectors) (for Maxx®/Hoss®) (not for use in marine models)

$119.95

3462: Heat sink, Velineon® 540XL motor

$10.00

3463: Cooling fan kit (with shroud), Velineon® 540XL motor

$24.95

3465: Velineon VXL-4s High Output Electronic Speed Control, waterproof (brushless) (fwd/rev/brake)

$139.95

3475: Cooling fan, Velineon® VXL ESC (fits VXL-6s & VXL-8s)

$19.95

3642: Attachment screws, shock (3x12mm shoulder screws) (6)

$3.00

3646: Screws, 3x15mm flat-head machine (hex drive) (6)

$2.50

3933: Screws, 4x16mm button-head machine (hex drive) (6)

$2.50

3937: Screws, 4x12mm button-head machine (hex drive) (6)

$2.50

4859: CS 3x10 flathead (hex drive)

$1.75

4955: Pins, axle (2.5x12mm) (4)

$1.00

5099A: Ball bearing, black rubber sealed (6x16x5mm) (2)

$4.00

5101: Ball bearings, blue rubber sealed (12x21x5mm) (2)

$8.00

5106A: Ball bearing, black rubber sealed (15x24x5mm) (2)

$8.00

5119A: Ball bearings, black rubber sealed (10x15x4mm) (2)

$7.00

5120A: Ball bearings, black rubber sealed (12x18x4mm) (2)

$8.00

5145: Screw pin, 4x15mm (6)

$3.50

5180A: Ball bearings, black rubber sealed (6x13x5mm) (2)

$4.00

5452: U-joints, driveshaft (carrier (4)/ 4.5mm cross pin (4)/ 3mm cross pin (4)/ e-clips (20)) (metal parts for 2 driveshafts)

$10.00

5677R: Cover, gear/ 3x8mm CS (1) (for single motor installation, use with motor plate #5690X)

$3.50

6447: Spur gear, 46-tooth (1.0 metric pitch)

$3.00

6447R: Spur gear, 46-tooth, steel (wide-face, 1.0 metric pitch)

$18.00

6448: Spur gear, 50-tooth (1.0 metric pitch)

$3.00

6448R: Spur gear, 50-tooth, steel (wide-face, 1.0 metric pitch)

$18.00

6449: Spur gear, 54-tooth (1.0 metric pitch)

$3.00

6449R: Spur gear, 54-tooth, steel (wide-face, 1.0 metric pitch)

$18.00

6465: Cush drive key/ pin/ elastomer damper

$2.50

6481X: Gear, 23-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

$6.00

6492X: Gear, 25-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

$7.00

6496X: Gear, 24-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

$6.00

6533: Receiver, micro, TQi 2.4GHz with telemetry & TSM® (5-channel)

$39.95

7793X: Housing, cush drive (front & rear halves)

$3.00

8447: Nuts, 5mm flanged nylon locking (steel, black serrated) (8)

$4.00

8447A: Nuts, 5mm flanged nylon locking (aluminum, black-anodized, serrated) (4)

$10.00

8447G: Nuts, 5mm flanged nylon locking (aluminum, green-anodized, serrated) (4)

$10.00

8447R: Nuts, 5mm flanged nylon locking (aluminum, red-anodized, serrated) (4)

$10.00

8447X: Nuts, 5mm flanged nylon locking (aluminum, blue-anodized, serrated) (4)

$10.00

8681X: Carrier, differential (aluminum)/ x-ring gaskets (2)/ ring gear gasket/ spacers (4)/ 12.2x18x0.5 MW

$19.95

8682: Gear set, differential (spider gears (4), spider gear shaft (2)

$10.00

8684: Output gear, center differential, hardened steel (2)

$24.95

8688: Gear, center differential, 44-tooth (fits #8980 center differential)

$11.00

8690: Plate, motor

$12.00

8910: Body reinforcement set, Maxx® (fits #8911 body)

$6.00

8912: Tailgate protector/ 3x10mm flat-head screw (3)

$4.00

8912G: Tailgate protector, green/ 3x10mm flat-head screw (3)

$4.00

8912R: Tailgate protector, red/ 3x10mm flat-head screw (3)

$4.00

8912T: Tailgate protector, orange/ 3x10mm flat-head screw (3)

$4.00

8912X: Tailgate protector, blue/ 3x10mm flat-head screw (3

$4.00

8913R: Body support, rear/ 3x10mm CS (4) (fits 8918 series Maxx® bodies for 352mm wheelbase)

$8.00

8915: Body mounts, front & rear/ 3x12mm BCS (1)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (9)

$18.00

8916: Mount, tie bar, front (1)/ rear (1)/ suspension pin retainer, front or rear (2)

$5.00

8917: Skid plate, roof (body) (black)/ 3x10mm CS (4)

$6.00

8917G: Skid plate, roof (body) (green)/ 3x10mm CS (4)

$6.00

8917R: Skid plate, roof (body) (red)/ 3x10mm CS (4)

$6.00

8917T: Skid plate, roof (body) (orange)/ 3x10mm CS (4)

$6.00

8917X: Skid plate, roof (body) (blue)/ 3x10mm CS (4)

$6.00

8918: Body, Maxx® (clear, requires painting)/ window masks/ decal sheet (fits Maxx® with extended chassis (352mm wheelbase))

$37.95

8918A: Body, Maxx®, blue (painted, decals applied) (fits Maxx® with extended chassis (352mm wheelbase))

$74.95

8918G: Body, Maxx®, green (painted, decals applied) (fits Maxx® with extended chassis (352mm wheelbase))

$74.95

8918P: Body, Maxx®, yellow (painted, decals applied) (fits Maxx® with extended chassis (352mm wheelbase))

$74.95

8918R: Body, Maxx®, red (painted, decals applied) (fits Maxx® with extended chassis (352mm wheelbase))

$74.95

8918T: Body, Maxx®, orange (painted, decals applied) (fits Maxx® with extended chassis (352mm wheelbase))

$74.95

8918X: Body, Maxx®, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheet (fits Maxx® with extended chassis (352mm wheelbase))

$49.95

8919R: Battery hold-down/ mounts (front & rear)/ battery compartment spacers/ foam pads (fits Maxx® with extended chassis (352mm wheelbase))

$11.00

8920: Bulkhead, front (upper and lower)

$12.00

8922R: Chassis (fits Maxx® with extended chassis (352mm wheelbase))

$23.00

8923: Nerf bars, chassis (2)

$5.00

8924: Box, receiver (sealed)/ wire cover/ foam pads/ silicone grease/ 2.5x10 CS (2)/ 3x10 CCS (3)

$12.00

8925: Seal kit, receiver box (includes o-ring, seal, and silicone grease)

$4.00

8927: Bulkhead tie bar, rear, upper (1)/ lower front (1)/ lower rear (1) (steel)

$12.00

8928: Bulkhead, rear (upper and lower)

$12.00

8931: Body, Maxx®, Rock n' Roll (painted, decals applied) (fits Maxx® with extended chassis (352mm wheelbase))

$74.95

8934: Bumper mount, rear

$5.00

8936: Bumper, rear

$6.00

8939: Shock tower, rear (left & right halves)

$8.00

8940: Suspension screw pin set, front or rear (hardened steel), 4x18mm (4), 4x38mm (2), 4x33mm (2), 4x43mm (2)

$6.00

8940X: Suspension pin set, complete (hardened steel), 4x64mm (4), 4x22mm (4), 4x38mm (4), 4x33mm (4), 4x47mm (4)/ 3x8mm BCS (14)/ 3x6mm BCS (4)/ retainers (8)

$24.95

8941: Suspension pins, lower, inner (front or rear), 4x64mm (2) (hardened steel)

$3.50

8944: Skidplate, front (1), rear (1)

$8.00

8945: Skidplate, center/ 4x20 CCS (4)/ 3x10 CS (4)

$8.00

8945R: Skidplate, center/ 4x20 CCS (4)/ 3x10 CS (4) (fits Maxx® with extended chassis (352mm wheelbase))

$9.00

8949: Differential output yoke assembly, front or rear (assembled with external-splined half shaft)

$7.00

8952: Carriers, stub axle (left & right)

$6.00

8952A: Carriers, stub axle (orange-anodized 6061-T6 aluminum) (rear) (2)

$49.95

8952G: Carriers, stub axle (green-anodized 6061-T6 aluminum) (rear) (2)

$49.95

8952R: Carriers, stub axle (red-anodized 6061-T6 aluminum) (rear) (2)

$49.95

8952X: Carriers, stub axle (blue-anodized 6061-T6 aluminum) (rear) (2)

$49.95

8953: Stub axle assembly, outer (front or rear) (assembled with internal-splined half shaft)

$7.00

8954: Drive hub, front (1)/ 3x10 screw pin (1)

$6.00

8955R: Driveshaft, center, aluminum (fits Maxx® with extended chassis (352mm wheelbase))

$12.00

8956: Wheel hubs, hex (2)/ 2.5x14 pins (2)

$3.00

8956G: Wheel hubs, hex, aluminum (green-anodized) (4)/ 4x13mm screw pins (4)

$24.95

8956R: Wheel hubs, hex, aluminum (red-anodized) (4)/ 4x13mm screw pins (4)

$24.95

8956T: Wheel hubs, hex, aluminum (orange-anodized) (4)/ 4x13mm screw pins (4)

$24.95

8956X: Wheel hubs, hex, aluminum (blue-anodized) (4)/ 4x13mm screw pins (4)

$24.95

8957: Wheel washers (4)

$2.00

8957G: Wheel washers, green (4)

$2.00

8957R: Wheel washers, red (4)

$2.00

8957T: Wheel washers, orange (4)

$2.00

8957X: Wheel washers, blue (4)

$2.00

8960: Motor mounts (front and rear)/ 4x10 BCS with split and flat washers (1)/ pin (1)

$10.00

8960X: Motor mounts (front and rear)/ 4x10 BCS with split and flat washers (1)/ pin (1) (for installation of #3481 motor into Maxx®)

$8.00

8961G: Shocks, GT-Maxx®, aluminum (green-anodized) (fully assembled w/o springs) (2)

$54.95

8961R: Shocks, GT-Maxx®, aluminum (red-anodized) (fully assembled w/o springs) (2)

$54.95

8961T: Shocks, GT-Maxx®, aluminum (orange-anodized) (fully assembled w/o springs) (2)

$54.95

8970: Tires, Maxx® All-Terrain 2.8" (2)/ foam inserts (2)

$29.00

8971: Wheels (black) (2)

$9.00

8973: Tires & wheels, assembled, glued (black wheels, dual profile (2.8" outer, 3.6" inner), Sledgehammer® tires, foam inserts) (2) (17mm splined) (TSM® rated)

$41.95

8974: Tires, Sledgehammer® (2)/ foam inserts (2)

$29.95

8976: Wheelie Bar

$24.95

8976A: Wheelie bar, white

$24.95

8976G: Wheelie bar, green

$24.95

8976R: Wheelie bar, red

$24.95

8976T: Wheelie bar, orange

$24.95

8976X: Wheelie bar, blue

$24.95

8977: Ring gear, differential/ pinion gear, differential (rear)

$15.00

8980: Differential kit, center (complete)

$74.95

8981: Carrier, differential/ x-ring gasket/ o-ring (2)/ 10x19.5x0.5 TW

$4.00

8982: Gear set, differential (output gears (2)/ spider gears (4)/ spider gear shaft (2)/ output shaft (2)/ 2.5X13.8 pin (2))

$18.00

8985: Input gear, transmission, 22-tooth/ 2.5x12mm pin

$4.00

8986: Input shaft, transmission

$3.00

8987: Covers, gear (2)

$4.00

8988: Gear, center differential, 44-tooth

$11.00

8989: Output gear, center differential, hardened steel (2)

$16.00

8993: Half shaft set, left or right (plastic parts only) (internal splined half shaft/ external splined half shaft) (4 assemblies) (for use with #8995 WideMaxx™ suspension kit)

$12.00

8993A: Half shafts, outer (extended, front or rear) (4)/ e-clips (8) (for use with #8995 WideMaxx™ suspension kit)

$7.00

8996: Driveshaft assembly, front or rear, Maxx® Duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1) (for use with #8995 WideMaxx™ suspension kit)

$14.00

8996A: Driveshaft, steel constant-velocity (shaft only, 109.5mm) (4) (for conversion of #8950X driveshafts to WideMaxx® suspension)

$44.95

8996R: Driveshaft, steel constant velocity (shaft only, 109.5mm) (1) (replacement shaft for #8996X)

$12.00

8996X: Driveshafts, steel constant-velocity (assembled), front or rear (4) (for use with #8995 WideMaxx® suspension kit) (requires #8654 series 17mm splined wheel hubs and #7758 series 17mm nuts for a complete set)

$99.95

8998: Suspension arms, upper, black (left or right, front or rear) (2) (for use with #8995 WideMaxx® suspension kit)

$10.00

8998G: Suspension arms, upper, green (left or right, front or rear) (2) (for use with #8995 WideMaxx® suspension kit)

$10.00

8998R: Suspension arms, upper, red (left or right, front or rear) (2) (for use with #8995 WideMaxx® suspension kit)

$10.00

8998T: Suspension arms, upper, orange (left or right, front or rear) (2) (for use with #8995 WideMaxx® suspension kit)

$10.00

8998X: Suspension arms, upper, blue (left or right, front or rear) (2) (for use with #8995 WideMaxx® suspension kit)

$10.00

8999: Suspension arms, lower, black (left and right, front or rear) (2) (for use with #8995 WideMaxx® suspension kit)

$12.00

8999G: Suspension arms, lower, green (left and right, front or rear) (2) (for use with #8995 WideMaxx® suspension kit)

$12.00

8999R: Suspension arms, lower, red (left and right, front or rear) (2) (for use with #8995 WideMaxx® suspension kit)

$12.00

8999T: Suspension arms, lower, orange (left and right, front or rear) (2) (for use with #8995 WideMaxx® suspension kit)

$12.00

8999X: Suspension arms, lower, blue (left and right, front or rear) (2) (for use with #8995 WideMaxx® suspension kit)

$12.00

Maxx® (89086-4) Chassis Assembly Exploded View

Maxx® (89086-4) Body Assembly Exploded View

Maxx® (89086-4) Chassis Assembly Exploded View

Maxx® (89086-4) Front Assembly Exploded View

Maxx® (89086-4) Modular Assembly Exploded View

Maxx® (89086-4) Rear Assembly Exploded View

Maxx® (89086-4) Transmission Assembly Exploded View

View PDF

Enter your email address to Subscribe.