Hoss 4X4 VXL (90076-4) Rear Assembly Exploded View

1552: 3x8mm Hex Cap Screws (6)/ Washers (6)/ Wrench (1)

$3.00

1654: Wheel hubs, hex (2)/ stub axle pins (2)

$2.00

1654X: Wheel hubs, hex (blue-anodized, lightweight aluminum) (2)/ axle pins(2)

$9.00

1747G: Nuts, aluminum, flanged, serrated (4mm) (green-anodized) (4)

$7.50

1747R: Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4)

$7.50

1765: Silicone diaphragms (4)

$2.00

1942: Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2)

$7.00

1952: Carriers, stub axle (rear) (2)

$3.00

1952G: Carriers, stub axle (green-anodized 6061-T6 aluminum) (rear) (left & right)/ 3x32mm hinge pins (2)/ e-clips (6)/ hardware

$25.95

1952T: Carriers, stub axle (orange-anodized 6061-T6 aluminum) (rear) (left & right)/ 3x32mm hinge pins (2)/ e-clips (6)/ hardware

$25.95

1952X: Carriers, stub axle (blue-anodized 6061-T6 aluminum) (rear) (left & right)/ 3x32mm hinge pins (2)/ e-clips (6)/ hardware

$25.95

1985: PTFE-coated Washers, 5x8x0.5mm (20) (use with ball bearings)

$2.00

2362: Shock rebuild kit (for 2 shocks)

$2.50

2534: Screws, 3x6mm countersunk machine (6) (hex drive)

$2.50

2535: Screws, 4x10mm countersunk machine (hex drive) (6)

$2.50

2550: Screws, 3x8mm countersunk machine (6) (hex drive)

$2.50

2551: Screws, 3x10mm countersunk machine (6) (hex drive)

$2.50

2552: Screws, 3x12mm countersunk machine (6) (hex drive)

$2.50

2554: Screws, 3x6mm caphead machine (hex drive) (6)

$2.50

2575: Screws, 3x6mm button-head machine (hex drive) (6)

$2.50

2576: Screws, 3x8mm button-head machine (hex drive) (6)

$2.50

2577: Screws, 3x10mm button-head machine (hex drive) (6)

$2.50

2578: Screws, 3x12mm button-head machine (hex drive) (6)

$2.50

2579: Screws, 3x15mm button-head machine (hex drive) (6)

$2.50

2580: Screws, 3x20mm button-head machine (hex drive) (6)

$2.50

2582: Screws, 3x30mm button-head machine (hex drive) (6)

$2.50

2584: Head screws, 3x12mm cap-head machine (hex drive) (6) (TRX® 2.5, 2.5R, 3.3)

$2.50

2656: Shock shafts, steel, chrome finish (xx-long) (2)

$3.00

2656T: Shock shafts, hardened steel, titanium nitride coated (xx-long) (2)

$10.00

2742X: Rod ends, short (6)/ hollow balls (6)

$4.00

2743: Set (grub) screws, 3mm hardened (12)

$3.00

2745: Nuts, 3mm nylon locking (12)

$2.00

2754: Stub axle pins (4)

$1.00

3461: Motor, Velineon® 540XL, 2400Kv 70mm, brushless (assembled with 6.5mm gold-plated bullet connectors) (for Maxx®/Hoss®) (not for use in marine models)

$119.95

3642: Attachment screws, shock (3x12mm shoulder screws) (6)

$3.00

3644: Turnbuckles, camber link, 39mm (69mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)

$7.00

3644G: Camber links, rear (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)

$32.95

3644R: Camber links, rear (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)

$32.95

3644X: Camber links, rear (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)

$32.95

3647: Nuts, 4mm flanged nylon locking (steel, serrated) (8)

$3.25

3655G: Suspension arms, green, front/rear (left & right), heavy duty (2)

$12.00

3655L: Suspension arms, red, front/rear (left & right), heavy duty (2)

$12.00

3655P: Suspension arms, blue, front/rear (left & right), heavy duty (2)

$12.00

3655R: Suspension arms, front/rear (left & right), heavy duty (2)

$12.00

3655T: Suspension arms, orange, front/rear (left & right), heavy duty (2)

$12.00

3757A: Springs, green (rear) (2)

$5.00

3757P: Springs, pink (rear) (2)

$4.00

3757R: Springs, rear (red) (2.9 rate) (2)

$4.00

3757X: Springs, white (rear) (2)

$4.00

3762A: Ultra Shocks (grey) (xx-long) (complete w/ spring pre-load spacers & springs) (rear) (2)

$18.00

3766A: Body, Ultra Shock (XXL) (grey) (2)

$3.00

3767: Shock caps (2)/ shock bottoms (2)

$3.00

3768: Spring retainers, upper & lower (2)/ piston head set (2-hole (2)/ 3-hole (2))

$3.00

3769: Spring pre-load spacers: 1mm (4)/ 2mm (2)/ 4mm (2)/ 8mm (2)

$4.00

3929: Screws, 4x18mm button-head machine (hex drive) (6)

$3.00

3932: Screws, 3x6mm flat-head machine (hex drive) (6)

$2.50

3937: Screws, 4x12mm button-head machine (hex drive) (6)

$2.50

3956: Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch)

$3.00

3956R: Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differential)

$3.00

3956X: Spur gear, steel, 54-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differential)

$15.00

3965: Screws, 2.5x8mm cap-head machine (6)

$2.50

4859: CS 3x10 flathead (hex drive)

$1.75

5116: Ball bearings, blue rubber sealed (5x11x4mm) (2)

$3.50

5118: Ball bearings, blue rubber sealed (8x16x5mm) (2)

$6.00

5119: Ball bearings, blue rubber sealed (10x15x4mm) (2)

$7.00

5119A: Ball bearings, black rubber sealed (10x15x4mm) (2)

$7.00

5120: Ball bearings, blue rubber sealed (12x18x4mm) (2)

$8.00

5142: Screws, 3x15mm caphead machine (hex drive) (with split and flat washers) (6)

$2.75

5351: Slipper pressure plate and hub (alloy)

$8.00

5352R: Rebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))

$9.50

5352X: Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))

$7.50

5381: Carrier, differential/ x-ring gaskets (2)/ ring gear gasket/ 6x10x0.5 TW

$4.25

5525: Rod ends (12)/ hollow balls (12)

$9.00

5552X: Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/ pin/ 4.0mm NL (1)/ 5.0mm NL (1))

$10.00

5556: Slipper pressure plate & hub (aluminum alloy)

$8.00

5640: Gear, 14-T pinion (0.8 metric pitch, compatible with 32-pitch) (hardened steel) (fits 5mm shaft)/ set screw

$5.00

5642: Gear, 13-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw

$5.00

5677R: Cover, gear/ 3x8mm CS (1) (for single motor installation, use with motor plate #5690X)

$3.50

6720: Body mounts, front & rear/ 3x12mm CS (4)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (8)/ 3x12mm BCS (1)

$12.00

6738: Shock tower, rear

$6.00

6738G: Shock tower, rear, 7075-T6 aluminum (green-anodized) (1)/ body mount bracket (1)

$25.95

6738R: Shock tower, rear, 7075-T6 aluminum (red-anodized) (1)/ body mount bracket (1)

$25.95

6738X: Shock tower, rear, 7075-T6 aluminum (blue-anodized) (1)/ body mount bracket (1)

$25.95

6765: Driveshaft, center, 6061-T6 aluminum (blue-anodized) (189mm)

$10.00

6765A: Driveshaft, center, 6061-T6 aluminum (orange-anodized) (189mm)

$10.00

6765G: Driveshaft, center, 6061-T6 aluminum (green-anodized) (189mm)

$10.00

6765R: Driveshaft, center, 6061-T6 aluminum (red-anodized) (189mm)

$10.00

6767: Driveshaft, center, plastic, (black)/ screw pin

$4.00

6776: Wheelie bar

$10.00

6780: Differential kit, center (complete)

$69.95

6780A: Center differential, complete (fits Hoss® 4X4 VXL)

$60.00

6781: Housing, center differential (aluminum)/ x-ring gaskets (2)/ ring gear gasket (1)/ bushings (4)/ 5x10x0.5 PTW (1)/ 2.5x10 CCS (with threadlock) (4)

$19.95

6782: Output gears, center differential, hardened steel (2)

$24.95

6783: Gear set, differential (spider gears (4)/ spider gear shaft (2))

$10.00

6789: Differential, rear (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash®, Stampede®, Rustler®) (13/37 ratio)

$34.95

6792: Tires & wheels, assembled, glued (black 2.8" wheels, Sledgehammer® tires, foam inserts) (2) (TSM® rated)

$36.95

6823: Bulkhead tie bars, front & rear, aluminum (blue-anodized)

$7.00

6823G: Bulkhead tie bars, front & rear, aluminum (green-anodized)

$7.00

6823R: Bulkhead tie bars, front & rear, aluminum (red-anodized)

$7.00

6828A: Differential output yoke assembly, extreme heavy duty (2) (left or right, front or rear) (assembled with external-splined half shaft)/ screw pin (2)

$8.00

6829: Bulkhead, rear

$6.00

6834: Suspension pin set, complete (front and rear)

$4.00

6842: Spur gear, 50-tooth (0.8 metric pitch, compatible with 32-pitch)

$3.00

6842X: Spur gear, steel, 50-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differential)

$15.00

6843: Spur gear, 52-tooth (0.8 metric pitch, compatible with 32-pitch)

$3.00

6851A: Driveshaft assembly, front, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

$12.00

6851X: Driveshaft assembly, front, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

$10.00

6852A: Driveshaft assembly, rear, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

$12.00

6852R: Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2)

$69.95

6853A: Stub axle assembly, rear, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft)

$6.00

6854A: Stub axle assembly, front, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft)

$6.00

6860A: Motor mount (assembled with 3x6 flat-head machine screw)/ 3.0mm NL (1)

$4.00

6860R: Motor mount, 6061-T6 aluminum (blue-anodized)

$34.95

6877: Cover, gear/ motor wire hold-down clip

$4.50

6877A: Cover, gear (clear)

$4.50

6879: Ring gear, differential/ pinion gear, differential (rear)

$15.00

6879R: Ring gear, differential/ pinion gear, differential (machined, spiral cut) (rear)

$39.95

6880: Housings, differential, rear

$4.00

6882X: Gear set, differential (output gears (2)/ spider gears (2)/ spider gear shaft, carrier support)

$15.00

6888: Drive hub, center, rear (1)/ 4x3 GS (1)

$5.00

6890: Plate, motor

$7.00

6890X: Plate, motor, 6061-T6 aluminum (blue-anodized)

$15.00

6893: Input shaft (slipper shaft)/ bearing adapter (1)/ pin (1)

$6.50

6893X: Bearing adapter, 6061-T6 aluminum (blue-anodized) (1)/10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft)

$5.00

8361: Shock caps (black) (4) (assembled with hollow balls)

$5.00

9010: Body reinforcement set (fits #9011 body)

$5.00

9011: Body, Hoss® 4X4 VXL (clear, requires painting)/ window, grille, lights decal sheet

$24.95

9011A: Body, Hoss® 4X4 VXL, orange (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)

$59.95

9011G: Body, Hoss® 4X4 VXL, green (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)

$59.95

9012: Tailgate protector/ 3x10mm flat-head screw (3)

$4.00

9013: Body support/ 3x12mm CS (4) / (fits #9011 body)

$7.00

9015: Body mounts, front & rear/ 3x12mm CS (4)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (6)/ 3x12mm BCS (1)

$18.00

9017: Skid plate, roof (body) (black) (left & right)/ 3x8mm CS (4)

$3.50

9022: Chassis

$20.00

9036: Bumper, rear/ bumper mount, rear/ bumper support, rear

$7.00

9072: Tires & wheels, assembled, glued (black chrome 2.8" wheels, Sledgehammer® tires, foam inserts) (2) (TSM® rated)

$38.95

9078: Wheelie bar (assembled)

$12.00

9081: Housing, center differential/ x-ring gaskets (2)/ 5x10x0.5 PTFE-coated washer (1)/ 2.5x10 CCS (4)

$5.00

9090: Gear adapter, fixed

$2.00

Hoss 4X4 VXL (90076-4) Rear Assembly Exploded View

Hoss 4X4 VXL (90076-4) Body Assembly Exploded View

Hoss 4X4 VXL (90076-4) Chassis Assembly Exploded View

Hoss 4X4 VXL (90076-4) Driveshafts Assembly Exploded View

Hoss 4X4 VXL (90076-4) Front Assembly Exploded View

Hoss 4X4 VXL (90076-4) Rear Assembly Exploded View

Hoss 4X4 VXL (90076-4) Transmission Assembly Exploded View

View PDF

Enter your email address to Subscribe.