Funco® Pro Scale® Sand Car (109076-4) Chassis Assembly Exploded View

10911: Body, Funco® Pro Scale® Sand Car (clear, requires painting)/ decal sheet (requires #10912 body cage & #10914 interior for complete assembly)

$99.95

10911-BLUE: Body, Funco® Pro Scale® Sand Car, blue (painted, decals applied) (assembled with front & rear body supports for clipless mounting, roll cage & interior)

$219.95

10911-GRN: Body, Funco® Pro Scale® Sand Car, green (painted, decals applied) (assembled with front & rear body supports for clipless mounting, roll cage & interior)

$219.95

10911-ORNG: Body, Funco® Pro Scale® Sand Car, orange (painted, decals applied) (assembled with front & rear body supports for clipless mounting, roll cage & interior)

$219.95

10911-RED: Body, Funco® Pro Scale® Sand Car, red (painted, decals applied) (assembled with front & rear body supports for clipless mounting, roll cage & interior)

$219.95

10911X: Body, Funco® Pro Scale® Sand Car, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheet (requires #10912 body cage & #10914 interior for complete assembly)

$149.95

10912: Cage, body (complete with assembly hardware) (attaches to #10911 body)

$49.95

10913: Wing/ 4x20mm BCS (4)

$15.00

10914: Interior, body/ interior accessories/ mounting hardware (attaches to #10911 body)

$39.95

10915: Body mounts, rear (upper & lower)

$12.00

10920: Bulkhead, rear (lower)

$22.00

10921: Bulkhead, rear (upper)

$6.00

10922: Nerf bars, chassis (left & right)

$8.00

10923: Latch, body mount, front (left & right)/ 3x15mm CS (16) (for clipless body mounting) (attaches to #10911 body)

$14.00

10924: Tray, servo/ steering cover

$12.00

10927: Cage, body (left & right) (attaches to #10911 body)

$40.00

10928: Crossbars, body cage (front & rear) (attaches to #10911 body)

$15.00

10933: Skid plate, center

$16.00

10935: Crossbars, body cage (top, middle, interior & roof)/ step rails (left & right) (attaches to #10911 body)

$18.00

10937: Skid plate, front (1)/ rubber impact cushion (1)

$10.00

10938: Shock tower extensions, rear (left & right)/ mounts (left & right)

$18.00

10941: Suspension pin set, rear (left or right) (hardened steel)

$10.00

10948-BLUE: Beadlock rings, rear, blue (4.3") (2)

$7.00

10948-CHRM: Beadlock rings, rear, chrome (4.3") (2)

$14.00

10948-GRN: Beadlock rings, rear, green (4.3") (2)

$7.00

10948-ORNG: Beadlock rings, rear, orange (4.3") (2)

$7.00

10948-RED: Beadlock rings, rear, red (4.3") (2)

$7.00

10949: Drive cup, steel, extreme durability (1)/ 3x8mm CS (use only with #7750X & 7896 driveshafts) (machined, heat treated)

$20.00

10958: Brake linkage/ servo horn, front/ mounting hardware

$12.00

10958-BLUE: Brake linkage, front (blue-anodized 6061-T6 aluminum)/ mounting hardware

$59.95

10958-GRN: Brake linkage, front (green-anodized 6061-T6 aluminum)/ mounting hardware

$59.95

10958-ORNG: Brake linkage, front (orange-anodized 6061-T6 aluminum)/ mounting hardware

$59.95

10958-RED: Brake linkage, front (red-anodized 6061-T6 aluminum)/ mounting hardware

$59.95

10960: Top gear, transmission (15-tooth)

$14.00

10962-BLUE: Shocks, GT-Maxx®, rear, aluminum, blue-anodized (fully assembled w/o springs) (2)

$69.95

10962-GRN: Shocks, GT-Maxx®, rear, aluminum, green-anodized (fully assembled w/o springs) (2)

$69.95

10962-ORNG: Shocks, GT-Maxx®, rear, aluminum, orange-anodized (fully assembled w/o springs) (2)

$69.95

10962-RED: Shocks, GT-Maxx®, rear, aluminum, red-anodized (fully assembled w/o springs) (2)

$69.95

10973: Tires & wheels, assembled, glued (Pro Scale® Sand Car Race black wheels, belted paddle tires, dual profile (3.6" outer, 4.7" inner), foam inserts) (rear) (1 left, 1 right)

$84.95

10974: Wheelie bar, black (assembled)

$15.00

10977-BLUE: Beadlock rings, rear, blue (3.9") (2)

$8.00

10977-CHRM: Beadlock rings, rear, chrome (3.9") (2)

$14.00

10977-GRN: Beadlock rings, rear, green (3.9") (2)

$8.00

10977-ORNG: Beadlock rings, rear, orange (3.9") (2)

$8.00

10977-RED: Beadlock rings, rear, red (3.9") (2)

$8.00

10978-RED: Engine supercharger, red

$8.00

10979: Gear, differential, 32-tooth (heavy duty)

$22.00

10981-GRAY: Engine block/ 3x25mm CS (4)

$15.00

10981-SATIN: Engine block, satin chrome/ 3x25mm CS (4)

$25.00

10982-BLK: Engine exhaust/ 2.5x12mm CS (8)

$10.00

10982-BLKCR: Engine exhaust, black chrome/ 2.5x12mm CS (8)

$20.00

10984-BLK: Engine pulleys/ 2.5x12mm CS (6)

$9.00

10985-BLKCR: Engine intake, black chrome/ 3x12mm CS (1)/ 2.5x12mm CS (2)

$16.00

10985-BLKGLS: Engine intake, black/ 3x12mm CS (1)/ 2.5x12mm CS (2)

$15.00

10986: Differential, rear, complete

$74.95

10987: Covers, gear (2)

$10.00

10988: Mount, spur gear (fixed)

$5.00

10992-BLUE: Whip light, LED, blue (assembled) (1)/ 3x12mm BCS (2) (replacement for 1 whip light, left or right) (requires #6588X accessory power supply)

$24.95

10992-GRN: Whip light, LED, green (assembled) (1)/ 3x12mm BCS (2) (replacement for 1 whip light, left or right) (requires #6588X accessory power supply)

$24.95

10992-ORNG: Whip light, LED, orange (assembled) (1)/ 3x12mm BCS (2) (replacement for 1 whip light, left or right) (requires #6588X accessory power supply)

$24.95

10992-RED: Whip light, LED, red (assembled) (1)/ 3x12mm BCS (2) (replacement for 1 whip light, left or right) (requires #6588X accessory power supply)

$24.95

10994: Idler gear, transmission (20-tooth)

$15.00

10995: Adapter plate, ring gear

$4.00

10995-BLUE: Adapter plate, ring gear (blue-anodized 6061-T6 aluminum)/ 3x10mm BCS (with threadlock) (4)

$19.95

1726: Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)

$1.00

2075: Servo, digital high-torque (ball bearing), waterproof

$39.95

2075R: Servo, digital high-speed, metal gear (ball bearing), waterproof

$49.95

2075X: Servo, digital high-torque, metal gear (ball bearing), waterproof

$49.95

2085RL: Servo, digital high-torque/high-speed, metal gear (ball bearing), waterproof

$139.95

2085XL: Servo, digital high-torque, metal gear (ball bearing), waterproof/ servo saver spring/ steering link

$99.95

2270: Servo, digital high-torque, metal gear (ball bearing), waterproof

$59.95

2275: Servo, digital high-torque, metal gear (ball bearing), waterproof

$69.95

2535: Screws, 4x10mm countersunk machine (hex drive) (6)

$2.50

2546: Screws, 4x15mm countersunk machine (hex drive) (6)

$2.50

2547: Screws, 4x18mm countersunk machine (hex drive) (6)

$2.50

2575: Screws, 3x6mm button-head machine (hex drive) (6)

$2.50

2576: Screws, 3x8mm button-head machine (hex drive) (6)

$2.50

2577: Screws, 3x10mm button-head machine (hex drive) (6)

$2.50

2578: Screws, 3x12mm button-head machine (hex drive) (6)

$2.50

2581: Screws, 3x25mm button-head machine (hex drive) (6)

$2.50

2584: Head screws, 3x12mm cap-head machine (hex drive) (6) (TRX® 2.5, 2.5R, 3.3)

$2.50

2586: Screws, 3x15mm cap-head machine (hex drive) (6)

$2.50

2587: Screws, 3x10mm caphead machine (6) (no washer)

$2.50

2589: Screws, 4x20mm button-head machine (hex drive) (6)

$2.50

2591: Screws, 3x23mm button-head machine (hex drive) (6)

$2.50

2594: Screws, 4x15mm button-head machine (hex drive) (6)

$3.00

2595: Screws, 4x35mm button-head machine (hex drive) (6)

$3.00

2596: Screws, 4x25mm button-head machine (hex drive) (6)

$3.00

2598X: Screws, 4x30mm button-head machine (hex drive) (6)

$3.00

2657: Screws, 3x8mm caphead machine (hex drive) (6)

$2.50

2743: Set (grub) screws, 3mm hardened (12)

$3.00

3229: Screws, 2.5x10mm cap-head machine (hex drive) (6)

$2.50

3236: Screws, 2.5x12mm cap-head machine (6)

$2.50

3362X: Heat sink, low profile, Velineon® 1200XL

$20.00

3474X: Dual cooling fan kit, low profile (with shroud) (fits #3491 motor)

$39.95

3475: Cooling fan, Velineon® VXL ESC (fits VXL-6s & VXL-8s)

$19.95

3491: Motor, Velineon® 1200XL, brushless

$249.95

3496T: Velineon® VXL-8s Electronic Speed Control, waterproof (brushless) (fwd/rev/brake)

$249.95

3646: Screws, 3x15mm flat-head machine (hex drive) (6)

$2.50

3929: Screws, 4x18mm button-head machine (hex drive) (6)

$3.00

3931: Screws, 3x8mm flat-head machine (hex drive) (6)

$2.50

3933: Screws, 4x16mm button-head machine (hex drive) (6)

$2.50

3937: Screws, 4x12mm button-head machine (hex drive) (6)

$2.50

3938: Screws, 4x14mm button-head machine (hex drive) (6)

$2.50

4859: CS 3x10 flathead (hex drive)

$1.75

4897: Screws, set (grub) 4mm (6) (w/ threadlock)

$3.00

4955: Pins, axle (2.5x12mm) (4)

$1.00

5101A: Ball bearings, black rubber sealed (12x21x5mm) (2)

$8.00

5106: Ball Bearing, blue rubber sealed (15x24x5) (2)

$8.00

5106A: Ball bearing, black rubber sealed (15x24x5mm) (2)

$8.00

5107A: Ball Bearing, black rubber sealed (17x26x5) (2)

$8.00

5119: Ball bearings, blue rubber sealed (10x15x4mm) (2)

$7.00

5180A: Ball bearings, black rubber sealed (6x13x5mm) (2)

$4.00

5182A: Ball bearing, black rubber sealed (20x27x4mm) (2)

$10.00

5196A: Ball bearing, black rubber sealed (20x32x7mm) (2)

$10.00

6447R: Spur gear, 46-tooth, steel (wide-face, 1.0 metric pitch)

$18.00

6448R: Spur gear, 50-tooth, steel (wide-face, 1.0 metric pitch)

$18.00

6449R: Spur gear, 54-tooth, steel (wide-face, 1.0 metric pitch)

$18.00

6449X: Spur gear, 54-tooth, steel (1.0 metric pitch)

$18.00

6481X: Gear, 23-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

$6.00

6493X: Gear, 21-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

$7.00

6494R: Gear, 20-T pinion (machined, hardened steel) (1.0 metric pitch) (fits 5mm shaft)/ set screw

$12.00

6494X: Gear, 20-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

$6.00

6533X: Receiver, micro, TQi 2.4GHz with telemetry & TSM® (5-channel)

$49.95

6588X: Accessory power supply (regulated, 3V, 3 amp)/ power tap connector (with cable)/ 3x10 BCS (2)/ 2.6x8 BCS (2)

$17.95

7716: Mount, tie bar, front (1)/ rear (1)

$6.00

7724X: Box, receiver (sealed)/ wire cover/ foam pads/ silicone grease/ 3x15 CS (4)

$6.00

7725X: Seal kit, receiver box (includes o-ring, seals, and silicone grease)

$4.00

7726: Bulkhead tie bar, upper (1)/ lower (2) (steel)

$10.00

7740: Suspension pin set, front or rear corner (hardened steel), 4x85mm (1), 4x47mm (3), 4x33mm (2) (qty 4, #7740 required for complete set)

$8.00

7742: Suspension pin set, shock mount (front or rear, hardened steel), 4x25mm (2), 4x38mm (2)

$4.50

7743: Suspension pin retainer (4)

$2.50

7750X: Driveshaft, steel constant-velocity (heavy duty, shaft only, 160mm) (1) (replacing #7750 also requires #7751X, #7754X and #7768 or #7768R)

$16.00

7751X: Rebuild kit, steel constant-velocity driveshaft (includes pins for 2 driveshaft assemblies (for use only with #7750X driveshaft)

$4.00

7756-BLK: Wheel hubs, hex (2)/ hex clips (2)

$6.00

7756-GRAY: Wheel hubs, hex, aluminum (gray-anodized) (4)

$20.00

7756-ORNG: Wheel hubs, hex, aluminum (orange-anodized) (4)

$20.00

7756G: Wheel hubs, hex, aluminum (green-anodized) (4)

$20.00

7756R: Wheel hubs, hex, aluminum (red-anodized) (4)

$20.00

7756X: Wheel hubs, hex, aluminum (blue-anodized) (4)

$20.00

7757: Wheel hex clips (6)

$3.00

7758: Wheel nuts, splined, 17mm, serrated (blue-anodized) (4)

$12.00

7758-GRAY: Wheel nuts, splined, 17mm, serrated (gray-anodized) (4)

$12.00

7758A: Wheel nuts, splined, 17mm, serrated (black-anodized) (4)

$12.00

7758G: Wheel nuts, splined, 17mm, serrated (green-anodized) (4)

$12.00

7758R: Wheel nuts, splined, 17mm, serrated (red-anodized) (4)

$12.00

7758T: Wheel nuts, splined, 17mm, serrated (orange-anodized) (4)

$12.00

7759: Washers, motor mount, aluminum (blue-anodized) (4)/ 4x18mm BCS (4)

$6.00

7759-BLK: Washers, motor mount, steel (4)/ 4x18mm BCS (4)

$4.00

7759-GRAY: Washers, motor mount, aluminum (gray-anodized) (4)/ 4x18mm BCS (4)

$6.00

7759-ORNG: Washers, motor mount, aluminum (orange-anodized) (4)/ 4x18mm BCS (4)

$6.00

7759G: Washers, motor mount, aluminum (green-anodized) (4)/ 4x18mm BCS (4)

$6.00

7759R: Washers, motor mount, aluminum (red-anodized) (4)/ 4x18mm BCS (4)

$6.00

7760: Motor mounts (front and rear)/ pins (2)

$5.00

7768: Stub axle, aluminum, (blue-anodized) (1) (for use only with #7750X or 7896 driveshaft)

$15.00

7768A: Stub axle, aluminum (black-anodized) (1) (for use only with #7750X or 7896 driveshaft)

$15.00

7768G: Stub axle, aluminum, (green-anodized) (1) (for use only with #7750X or 7896 driveshaft)

$15.00

7768R: Stub axle, aluminum, (red-anodized) (1) (for use only with #7750X or 7896 driveshaft)

$15.00

7768T: Stub axle, aluminum, (orange-anodized) (1) (for use only with #7750X or 7896 driveshaft)

$15.00

7775: Wheels, wheelie bar (2)/ axles, wheelie bar (2)/ 10x15x4 plastic bushings (4) (for #7776, 8976, or 9576 wheelie bar)

$6.00

7778: Pinion gear, differential, 13-tooth (rear) (use with #7779 42-tooth differential ring gear)

$6.00

7780: Housing, differential (front/rear)

$3.00

7781: Carrier, differential/ x-ring gaskets (2)/ ring gear gasket/ 16X23.5X.5 TW

$4.00

7781X: Carrier, differential (aluminum)/ (requires #7783X spider gear shaft)

$20.00

7782: Gear set, differential (output gears (2)/ spider gears (4)/16X23.5X.5 TW(2))

$20.00

7783: Spider gear shaft (2)/ spacers (4)/16X23.5X.5 TW (2)

$8.00

7783X: Spider gear shaft (2)/ spacers (4)/16x23.5x.5 stainless washer (2) (for #7781X aluminum differential carrier)

$10.00

7791: Pinion gear, differential, 11-tooth (rear) (heavy duty) (use with #7792 35-tooth differential ring gear)

$8.00

7792: Ring gear, differential, 35-tooth (heavy duty) (use with #7790, #7791 11-tooth differential pinion gears)

$10.00

7819: Battery hold-down/ battery compartment spacers/ foam pads

$12.00

7819X: Foam pads, battery compartment

$5.00

7822X: Chassis

$22.00

7829: Suspension arms, black, upper (left or right, front or rear), heavy duty (2)

$10.00

7829-CHRM: Suspension arms, chrome, upper (left or right, front or rear), heavy duty (2)

$16.00

7829G: Suspension arms, green, upper (left or right, front or rear), heavy duty (2)

$10.00

7829R: Suspension arms, red, upper (left or right, front or rear), heavy duty (2)

$10.00

7829T: Suspension arms, orange, upper (left or right, front or rear), heavy duty (2)

$10.00

7829X: Suspension arms, blue, upper (left or right, front or rear), heavy duty (2)

$10.00

7830: Suspension arm, black, lower (right, front or rear), heavy duty (1)

$12.00

7830-CHRM: Suspension arm, chrome, lower (right, front or rear), heavy duty (1)

$14.00

7830G: Suspension arm, green, lower (right, front or rear), heavy duty (1)

$12.00

7830R: Suspension arm, red, lower (right, front or rear), heavy duty (1)

$12.00

7830T: Suspension arm, orange, lower (right, front or rear), heavy duty (1)

$12.00

7830X: Suspension arm, blue, lower (right, front or rear), heavy duty (1)

$12.00

7831: Suspension arm, black, lower (left, front or rear), heavy duty (1)

$12.00

7831-CHRM: Suspension arm, chrome, lower (left, front or rear), heavy duty (1)

$14.00

7831G: Suspension arm, green, lower (left, front or rear), heavy duty (1)

$12.00

7831R: Suspension arm, red, lower (left, front or rear), heavy duty (1)

$12.00

7831T: Suspension arm, orange, lower (left, front or rear), heavy duty (1)

$12.00

7831X: Suspension arm, blue, lower (left, front or rear), heavy duty (1)

$12.00

7833: Battery hold-down mounts, left (2)/ right (2)/ 4x15mm CCS (4)

$6.00

7838: Shock tower, rear (left & right halves)

$10.00

7852: Carriers, stub axle (rear) (left & right)

$9.00

7852-BLUE: Carriers, stub axle (blue-anodized 6061-T6 aluminum) (left & right)

$59.95

7852-GRAY: Carriers, stub axle (gray-anodized 6061-T6 aluminum) (left & right)

$59.95

7852-GRN: Carriers, stub axle (green-anodized 6061-T6 aluminum) (left & right)

$59.95

7852-ORNG: Carriers, stub axle (orange-anodized 6061-T6 aluminum) (left & right)

$59.95

7852-RED: Carriers, stub axle (red-anodized 6061-T6 aluminum) (left & right)

$59.95

7852X: Carriers, stub axle (rear) (left & right)/ 20x32x7mm bearings (2)/ 15x24x5mm bearings (2)

$24.95

7878X: Spacer, motor shaft (steel)/ e-clip (1)

$2.00

Funco® Pro Scale® Sand Car (109076-4) Chassis Assembly Exploded View

Funco® Pro Scale® Sand Car (109076-4) Body Assembly Exploded View

Funco® Pro Scale® Sand Car (109076-4) Body Cage Assembly Exploded View

Funco® Pro Scale® Sand Car (109076-4) Chassis Assembly Exploded View

Funco® Pro Scale® Sand Car (109076-4) Front Assembly Exploded View

Funco® Pro Scale® Sand Car (109076-4) Modular Assembly Exploded View

Funco® Pro Scale® Sand Car (109076-4) Rear Assembly Exploded View

Funco® Pro Scale® Sand Car (109076-4) Transmission Assembly Exploded View

View PDF

Enter your email address to Subscribe.