2550: Screws, 3x8mm countersunk machine (6) (hex drive)

2554: Screws, 3x6mm caphead machine (hex drive) (6)

2575: Screws, 3x6mm button-head machine (hex drive) (6)

2577: Screws, 3x10mm button-head machine (hex drive) (6)

2579: Screws, 3x15mm button-head machine (hex drive) (6)

2754: Stub axle pins (4)

3384: Motor, BL-2s™ 3300, brushless

3785: Motor, Titan® 12T (12-Turn, 550 size)

3931: Screws, 3x8mm flat-head machine (hex drive) (6)

3932: Screws, 3x6mm flat-head machine (hex drive) (6)

3936: Screws, 4x10mm button-head machine (hex drive) (6)

3937: Screws, 4x12mm button-head machine (hex drive) (6)

3938: Screws, 4x14mm button-head machine (hex drive) (6)

3943X: Gear, 13-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw

3956: Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch)

5116: Ball bearings, blue rubber sealed (5x11x4mm) (2)

5119: Ball bearings, blue rubber sealed (10x15x4mm) (2)

5119A: Ball bearings, black rubber sealed (10x15x4mm) (2)

5142: Screws, 3x15mm caphead machine (hex drive) (with split and flat washers) (6)

5351: Slipper pressure plate and hub (alloy)

5352X: Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))

5452X: U-joints, driveshaft (carrier (4)/ 4.5mm cross pin (4)/ 3mm headed pin (4)/ 4x15mm screw pin (2)/ hex pin (2)/ e-clips (10)/ 3x6x0.5 MW (8)) (metal parts for 2 driveshafts)

5556: Slipper pressure plate & hub (aluminum alloy)

6842: Spur gear, 50-tooth (0.8 metric pitch, compatible with 32-pitch)

6843: Spur gear, 52-tooth (0.8 metric pitch, compatible with 32-pitch)

6860A: Motor mount (assembled with 3x6 flat-head machine screw)/ 3.0mm NL (1)

6888: Drive hub, center, rear (1)/ 4x3 GS (1)

6893: Input shaft (slipper shaft)/ bearing adapter (1)/ pin (1)

6893X: Bearing adapter, 6061-T6 aluminum (blue-anodized) (1)/10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft)

7410: Body reinforcement set, front (left & right)/ body posts, front (fits #7412 series bodies)

7412: Body, Ford Fiesta® ST Rally (clear, requires painting)

7413X: Wing, Ford Fiesta® ST Rally (black)/ body posts, rear/ 3x8mm FCS (4) (fits #7412 series bodies)

7414: Cross brace, body (with clipless latches)/ 3x15 BCS (4) (fits #7412 series bodies)

7419: Side trim (left & right)/ trim retainers (left & right) (fits #7412 series bodies)

7450: Driveshaft assembly, front, extreme heavy duty with 6mm axle (1)/ screw pin (1) (left or right) (fully assembled, ready to install)

7451: Driveshaft assembly, rear, extreme heavy duty with 6mm axle (1)/ screw pin (1) (left or right) (fully assembled, ready to install)

7455: Driveshaft, center, plastic (black)/ screw pin

7460A: Motor mount (assembled with 3x6 flat-head machine screw)/ 3.0mm NL (1)

7460R: Motor mount, 6061-T6 aluminum (blue-anodized)

7477: Cover, gear/ wire retainer

7490: Plate, motor

7490A: Plate, motor, orange

7490G: Plate, motor, green

7490R: Plate, motor, red