Ford Fiesta ST Rally VXL (74276-4) Rear Assembly Exploded View

1654: Wheel hubs, hex (2)/ stub axle pins (2)

$2.00

1654X: Wheel hubs, hex (blue-anodized, lightweight aluminum) (2)/ axle pins(2)

$9.00

1747R: Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4)

$7.50

1765: Silicone diaphragms (4)

$2.00

1952: Carriers, stub axle (rear) (2)

$3.00

1952A: Carriers, stub axle (red-anodized 6061-T6 aluminum) (rear) (left & right)/ 3x32mm hinge pins (2)/ e-clips (6)/ hardware

$25.95

1952G: Carriers, stub axle (green-anodized 6061-T6 aluminum) (rear) (left & right)/ 3x32mm hinge pins (2)/ e-clips (6)/ hardware

$25.95

1952T: Carriers, stub axle (orange-anodized 6061-T6 aluminum) (rear) (left & right)/ 3x32mm hinge pins (2)/ e-clips (6)/ hardware

$25.95

1952X: Carriers, stub axle (blue-anodized 6061-T6 aluminum) (rear) (left & right)/ 3x32mm hinge pins (2)/ e-clips (6)/ hardware

$25.95

1985: PTFE-coated Washers, 5x8x0.5mm (20) (use with ball bearings)

$2.00

2362: Shock rebuild kit (for 2 shocks)

$2.50

2523: Screws, 2.5x10 countersunk machine (hex drive) (6)

$2.50

2550: Screws, 3x8mm countersunk machine (6) (hex drive)

$2.50

2551: Screws, 3x10mm countersunk machine (6) (hex drive)

$2.50

2552: Screws, 3x12mm countersunk machine (6) (hex drive)

$2.50

2554: Screws, 3x6mm caphead machine (hex drive) (6)

$2.50

2575: Screws, 3x6mm button-head machine (hex drive) (6)

$2.50

2577: Screws, 3x10mm button-head machine (hex drive) (6)

$2.50

2579: Screws, 3x15mm button-head machine (hex drive) (6)

$2.50

2580: Screws, 3x20mm button-head machine (hex drive) (6)

$2.50

2656: Shock shafts, steel, chrome finish (xx-long) (2)

$3.00

2656T: Shock shafts, hardened steel, titanium nitride coated (xx-long) (2)

$10.00

2742X: Rod ends, short (6)/ hollow balls (6)

$4.00

2746: Washers, 3x6mm metal (12)

$1.50

2754: Stub axle pins (4)

$1.00

3351R: Motor, Velineon® 3500, brushless (assembled with 12-gauge wire and gold-plated bullet connectors)

$89.95

3354R: Motor cover, endbell (Velineon® 3500)

$3.00

3642X: Shoulder screws, Ultra Shocks (3x12 hex drive) (6)

$3.00

3644: Turnbuckles, camber link, 39mm (69mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)

$7.00

3647: Nuts, 4mm flanged nylon locking (steel, serrated) (8)

$3.25

3766A: Body, Ultra Shock (XXL) (grey) (2)

$3.00

3767: Shock caps (2)/ shock bottoms (2)

$3.00

3767A: Shock caps, aluminum (blue-anodized) (4) (fits all Ultra Shocks)

$14.00

3767G: Shock caps, aluminum (green-anodized) (4) (fits all Ultra Shocks)

$14.00

3767P: Shock caps, aluminum (pink-anodized) (4) (fits all Ultra Shocks)

$14.00

3767X: Shock caps, aluminum (red-anodized) (4) (fits all Ultra Shocks)

$14.00

3768: Spring retainers, upper & lower (2)/ piston head set (2-hole (2)/ 3-hole (2))

$3.00

3769: Spring pre-load spacers: 1mm (4)/ 2mm (2)/ 4mm (2)/ 8mm (2)

$4.00

3931: Screws, 3x8mm flat-head machine (hex drive) (6)

$2.50

3932: Screws, 3x6mm flat-head machine (hex drive) (6)

$2.50

3936: Screws, 4x10mm button-head machine (hex drive) (6)

$2.50

3937: Screws, 4x12mm button-head machine (hex drive) (6)

$2.50

3938: Screws, 4x14mm button-head machine (hex drive) (6)

$2.50

3943X: Gear, 13-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw

$5.95

3956: Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch)

$3.00

3956X: Spur gear, steel, 54-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differential)

$15.00

3965: Screws, 2.5x8mm cap-head machine (6)

$2.50

3981: PTFE-coated Washers, 6x9.5x0.5mm (10) (use with ball bearings)

$1.25

5116: Ball bearings, blue rubber sealed (5x11x4mm) (2)

$3.50

5117A: Ball bearings, black rubber sealed (6x12x4mm) (2)

$4.00

5118: Ball bearings, blue rubber sealed (8x16x5mm) (2)

$6.00

5119: Ball bearings, blue rubber sealed (10x15x4mm) (2)

$7.00

5119A: Ball bearings, black rubber sealed (10x15x4mm) (2)

$7.00

5120: Ball bearings, blue rubber sealed (12x18x4mm) (2)

$8.00

5120A: Ball bearings, black rubber sealed (12x18x4mm) (2)

$8.00

5142: Screws, 3x15mm caphead machine (hex drive) (with split and flat washers) (6)

$2.75

5351: Slipper pressure plate and hub (alloy)

$8.00

5352R: Rebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))

$9.50

5352X: Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))

$7.50

5381: Carrier, differential/ x-ring gaskets (2)/ ring gear gasket/ 6x10x0.5 TW

$4.25

5525: Rod ends (12)/ hollow balls (12)

$9.00

5552X: Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/ pin/ 4.0mm NL (1)/ 5.0mm NL (1))

$10.00

5556: Slipper pressure plate & hub (aluminum alloy)

$8.00

6731: Suspension arms, front/rear (left & right) (2)

$10.00

6780: Differential kit, center (complete) (aluminum carrier)

$69.95

6780A: Differential kit, center (complete) (assembled with 500K wt differential fluid & 54T spur gear)

$60.00

6781: Housing, center differential (aluminum)/ x-ring gaskets (2)/ ring gear gasket (1)/ bushings (4)/ 5x10x0.5 PTW (1)/ 2.5x10 CCS (with threadlock) (4)

$19.95

6782: Output gears, center differential, hardened steel (2)

$24.95

6783: Gear set, differential (spider gears (4)/ spider gear shaft (2))

$10.00

6789: Differential, rear (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash®, Stampede®, Rustler®) (13/37 ratio)

$34.95

6823: Bulkhead tie bars, front & rear, aluminum (blue-anodized)

$7.00

6823G: Bulkhead tie bars, front & rear, aluminum (green-anodized)

$7.00

6823R: Bulkhead tie bars, front & rear, aluminum (red-anodized)

$7.00

6834: Suspension pin set, complete (front and rear)

$4.00

6838: Shock tower, rear

$6.00

6838X: Shock tower, rear, 7075-T6 aluminum (blue-anodized) (1)/ body mount bracket (1)

$25.95

6842: Spur gear, 50-tooth (0.8 metric pitch, compatible with 32-pitch)

$3.00

6842X: Spur gear, steel, 50-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differential)

$15.00

6843: Spur gear, 52-tooth (0.8 metric pitch, compatible with 32-pitch)

$3.00

6852A: Driveshaft assembly, rear, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

$12.00

6852R: Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2)

$69.95

6855: Driveshaft, center, 6061-T6 aluminum (blue-anodized) (214mm)

$10.00

6855G: Driveshaft, center, 6061-T6 aluminum (green-anodized) (214mm)

$10.00

6855R: Driveshaft, center, 6061-T6 aluminum (red-anodized) (214mm)

$10.00

6860A: Motor mount (assembled with 3x6 flat-head machine screw)/ 3.0mm NL (1)

$4.00

6868: Springs, rear (progressive, +20% rate, blue) (2)

$6.50

6879: Ring gear, differential/ pinion gear, differential (rear)

$15.00

6879R: Ring gear, differential/ pinion gear, differential (machined, spiral cut) (rear)

$39.95

6880: Housings, differential, rear

$4.00

6882X: Gear set, differential (output gears (2)/ spider gears (2)/ spider gear shaft, carrier support)

$15.00

6888: Drive hub, center, rear (1)/ 4x3 GS (1)

$5.00

6893: Input shaft (slipper shaft)/ bearing adapter (1)/ pin (1)

$6.50

6893G: Bearing adapter, 6061-T6 aluminum (green-anodized) (1)/ 10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft)

$5.00

6893X: Bearing adapter, 6061-T6 aluminum (blue-anodized) (1)/10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft)

$5.00

7410: Body reinforcement set, front (left & right)/ body posts, front (fits #7412 series bodies)

$7.00

7412: Body, Ford Fiesta® ST Rally (clear, requires painting)

$54.95

7413X: Wing, Ford Fiesta® ST Rally (black)/ body posts, rear/ 3x8mm FCS (4) (fits #7412 series bodies)

$12.00

7414: Cross brace, body (with clipless latches)/ 3x15 BCS (4) (fits #7412 series bodies)

$12.00

7417: Body mounts, front & rear

$8.00

7419: Side trim (left & right)/ trim retainers (left & right) (fits #7412 series bodies)

$7.00

7422: Chassis

$20.00

7427-GRN: Body, Ford Fiesta® ST Rally VXL, green (painted, decals applied) (assembled with rear wing, body support, & body mount latches for clipless mounting)

$89.95

7427-ORNG: Body, Ford Fiesta® ST Rally VXL, orange (painted, decals applied) (assembled with rear wing, body support, & body mount latches for clipless mounting)

$89.95

7427X: Body, Ford Fiesta® ST Rally VXL, ProGraphix® (graphics are printed, requires paint & final color application)/ wing/ 3x8mm FCS (4)/ decal sheet

$59.95

7429: Bulkhead, rear

$6.00

7431: Turnbuckles, camber link, 49mm (63mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)

$8.00

7450: Driveshaft assembly, front, extreme heavy duty with 6mm axle (1)/ screw pin (1) (left or right) (fully assembled, ready to install)

$14.00

7451: Driveshaft assembly, rear, extreme heavy duty with 6mm axle (1)/ screw pin (1) (left or right) (fully assembled, ready to install)

$14.00

7457: Springs, rear (white) (progressive rate) (2)

$6.00

7460A: Motor mount (assembled with 3x6 flat-head machine screw)/ 3.0mm NL (1)

$6.00

7460R: Motor mount, 6061-T6 aluminum (blue-anodized)

$36.95

7471: Tires, gravel pattern (2)/ foam inserts (2)

$18.95

7472X: Wheels, green (2)

$5.95

7473T: Tires & wheels, assembled, glued (black wheels, gravel pattern tires, foam inserts) (2) (TSM® rated)

$24.95

7477: Cover, gear/ wire retainer

$3.00

7490: Plate, motor

$7.00

7490A: Plate, motor, orange

$7.00

7490G: Plate, motor, green

$7.00

7490R: Plate, motor, red

$7.00

8361: Shock caps (black) (4) (assembled with hollow balls)

$5.00

9039: Shock tower, rear, extreme heavy duty, black (for use with #9080 upgrade kit)

$6.00

9039-GRAY: Shock tower, rear, extreme heavy duty, gray (for use with #9080 upgrade kit)

$6.00

9039G: Shock tower, rear, extreme heavy duty, green (for use with #9080 upgrade kit)

$6.00

9039R: Shock tower, rear, extreme heavy duty, red (for use with #9080 upgrade kit)

$6.00

9039T: Shock tower, rear, extreme heavy duty, orange (for use with #9080 upgrade kit)

$6.00

9039X: Shock tower, rear, extreme heavy duty, blue (for use with #9080 upgrade kit)

$6.00

9042: Suspension pin set, extreme heavy duty, complete (front and rear) (3x52mm (4), 3x32mm (2), 3x40mm (2)) (for use with #9080 upgrade kit)

$4.00

9042X: Suspension pin set, extreme heavy duty, complete (front and rear) (hardened steel) (3x52mm (4), 3x32mm (2), 3x40mm (2))/ M2.5x0.45mm NL (8) (for use with #9080 upgrade kit)

$15.00

9043: Screw pins, 3x16mm, extreme heavy duty (6) (for use with #9080 upgrade kit)

$4.00

9050: Carriers, stub axle, rear, extreme heavy duty, black (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)

$6.00

9050-GRAY: Carriers, stub axle, rear, extreme heavy duty, gray (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)

$6.00

9050G: Carriers, stub axle, rear, extreme heavy duty, green (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)

$6.00

9050R: Carriers, stub axle, rear, extreme heavy duty, red (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)

$6.00

9050T: Carriers, stub axle, rear, extreme heavy duty, orange (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)

$6.00

9050X: Carriers, stub axle, rear, extreme heavy duty, blue (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)

$6.00

9069: Wheel hubs, 12mm hex (steel), extreme heavy duty (4)/ 2x9.8mm pin (4) (for use with #9080 upgrade kit and 6mm axles)

$10.00

9081: Housing, center differential/ x-ring gaskets (2)/ 5x10x0.5 PTFE-coated washer (1)/ 2.5x10 CCS (4)

$5.00

Ford Fiesta ST Rally VXL (74276-4) Rear Assembly Exploded View

Ford Fiesta ST Rally VXL (74276-4) Body Assembly Exploded View

Ford Fiesta ST Rally VXL (74276-4) Chassis Assembly Exploded View

Ford Fiesta ST Rally VXL (74276-4) Driveshafts Assembly Exploded View

Ford Fiesta ST Rally VXL (74276-4) Front Assembly Exploded View

Ford Fiesta ST Rally VXL (74276-4) Rear Assembly Exploded View

Ford Fiesta ST Rally VXL (74276-4) Transmission Assembly Exploded View

View PDF

Enter your email address to Subscribe.