Ford Fiesta ST Rally (74054-4) Front Assembly Exploded View

1552: 3x8mm Hex Cap Screws (6)/ Washers (6)/ Wrench (1)

$3.00

1654: Wheel hubs, hex (2)/ stub axle pins (2)

$2.00

1654X: Wheel hubs, hex (blue-anodized, lightweight aluminum) (2)/ axle pins(2)

$9.00

1664: Shock shafts, steel, chrome finish (long) (2)

$3.00

1664T: Shock shafts, hardened steel, titanium nitride coated (long) (2)

$10.00

1726: Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)

$1.00

1747R: Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4)

$7.50

1765: Silicone diaphragms (4)

$2.00

1926: Antenna caps, vinyl (2)/ antenna spool

$2.00

1952: Carriers, stub axle (rear) (2)

$3.00

1952A: Carriers, stub axle (red-anodized 6061-T6 aluminum) (rear) (left & right)/ 3x32mm hinge pins (2)/ e-clips (6)/ hardware

$25.95

1952G: Carriers, stub axle (green-anodized 6061-T6 aluminum) (rear) (left & right)/ 3x32mm hinge pins (2)/ e-clips (6)/ hardware

$25.95

1952T: Carriers, stub axle (orange-anodized 6061-T6 aluminum) (rear) (left & right)/ 3x32mm hinge pins (2)/ e-clips (6)/ hardware

$25.95

1952X: Carriers, stub axle (blue-anodized 6061-T6 aluminum) (rear) (left & right)/ 3x32mm hinge pins (2)/ e-clips (6)/ hardware

$25.95

1985: PTFE-coated Washers, 5x8x0.5mm (20) (use with ball bearings)

$2.00

2056: Servo, high-torque, waterproof (blue case)

$33.95

2075: Servo, digital high-torque (ball bearing), waterproof

$39.95

2362: Shock rebuild kit (for 2 shocks)

$2.50

2428: Gear, 12-T pinion (48-pitch) (fits 3mm shaft)/ set screw

$3.00

2441A: Camber link set for Bandit (grey) (plastic/ non-adjustable)

$3.00

2524: Screws, 2.5x8 countersunk machine (hex drive) (6)

$2.50

2534: Screws, 3x6mm countersunk machine (6) (hex drive)

$2.50

2535: Screws, 4x10mm countersunk machine (hex drive) (6)

$2.50

2542: Screws, 4x12mm countersunk machine (hex drive) (6)

$2.50

2545: Bushings (plastic) (5x8x2.5mm) (4)

$3.00

2550: Screws, 3x8mm countersunk machine (6) (hex drive)

$2.50

2551: Screws, 3x10mm countersunk machine (6) (hex drive)

$2.50

2552: Screws, 3x12mm countersunk machine (6) (hex drive)

$2.50

2553: Screws, 3x15mm countersunk machine (6) (hex drive)

$2.50

2554: Screws, 3x6mm caphead machine (hex drive) (6)

$2.50

2557: Screws, 3x30mm cap-head machine (hex drive) (6)

$2.50

2575: Screws, 3x6mm button-head machine (hex drive) (6)

$2.50

2577: Screws, 3x10mm button-head machine (hex drive) (6)

$2.50

2579: Screws, 3x15mm button-head machine (hex drive) (6)

$2.50

2580: Screws, 3x20mm button-head machine (hex drive) (6)

$2.50

2656: Shock shafts, steel, chrome finish (xx-long) (2)

$3.00

2656T: Shock shafts, hardened steel, titanium nitride coated (xx-long) (2)

$10.00

2742: Rod ends, long (6)/ hollow ball connectors (6)

$4.00

2742X: Rod ends, short (6)/ hollow balls (6)

$4.00

2743: Set (grub) screws, 3mm hardened (12)

$3.00

2746: Washers, 3x6mm metal (12)

$1.50

2754: Stub axle pins (4)

$1.00

3018R: XL-5 Electronic Speed Control, waterproof (land version, low-voltage detection, fwd/rev/brake)

$59.95

3139: Turnbuckles (62mm) (front tie rods) (2)

$2.00

3236: Screws, 2.5x12mm cap-head machine (6)

$2.50

3642X: Shoulder screws, Ultra Shocks (3x12 hex drive) (6)

$3.00

3647: Nuts, 4mm flanged nylon locking (steel, serrated) (8)

$3.25

3765A: Body, Ultra Shock (long) (grey) (2)

$3.00

3766A: Body, Ultra Shock (XXL) (grey) (2)

$3.00

3767: Shock caps (2)/ shock bottoms (2)

$3.00

3767A: Shock caps, aluminum (blue-anodized) (4) (fits all Ultra Shocks)

$14.00

3767G: Shock caps, aluminum (green-anodized) (4) (fits all Ultra Shocks)

$14.00

3767P: Shock caps, aluminum (pink-anodized) (4) (fits all Ultra Shocks)

$14.00

3767X: Shock caps, aluminum (red-anodized) (4) (fits all Ultra Shocks)

$14.00

3768: Spring retainers, upper & lower (2)/ piston head set (2-hole (2)/ 3-hole (2))

$3.00

3769: Spring pre-load spacers: 1mm (4)/ 2mm (2)/ 4mm (2)/ 8mm (2)

$4.00

3785: Motor, Titan® 12T (12-Turn, 550 size)

$25.95

3932: Screws, 3x6mm flat-head machine (hex drive) (6)

$2.50

3936: Screws, 4x10mm button-head machine (hex drive) (6)

$2.50

3937: Screws, 4x12mm button-head machine (hex drive) (6)

$2.50

3938: Screws, 4x14mm button-head machine (hex drive) (6)

$2.50

3956: Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch)

$3.00

3956R: Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differential)

$3.00

3965: Screws, 2.5x8mm cap-head machine (6)

$2.50

3967: Shoulder screws 3x10 (6) (without threadlock)

$3.50

4683: Spur gear, 83-tooth (48-pitch) (for models with Torque Control slipper clutch)

$3.00

5116: Ball bearings, blue rubber sealed (5x11x4mm) (2)

$3.50

5117: Ball bearings, blue rubber sealed (6x12x4mm) (2)

$4.00

5118: Ball bearings, blue rubber sealed (8x16x5mm) (2)

$6.00

5119: Ball bearings, blue rubber sealed (10x15x4mm) (2)

$7.00

5119A: Ball bearings, black rubber sealed (10x15x4mm) (2)

$7.00

5120: Ball bearings, blue rubber sealed (12x18x4mm) (2)

$8.00

5142: Screws, 3x15mm caphead machine (hex drive) (with split and flat washers) (6)

$2.75

5282: Screws, 3x12mm button-head machine (6) (Starter attachment screws w/ threadlock)

$3.00

5351: Slipper pressure plate and hub (alloy)

$8.00

5352X: Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))

$7.50

5379R: Ring gear, differential/ pinion gear, differential (machined, spiral cut) (front)

$39.95

5379X: Ring gear, differential/ pinion gear, differential

$15.00

5381: Carrier, differential/ x-ring gaskets (2)/ ring gear gasket/ 6x10x0.5 TW

$4.25

5529: Shim set, 3x7x1mm (2), 3x6x0.5mm (4), 3x7x2mm (2)/ hollow balls, captured (4)

$3.50

5552X: Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/ pin/ 4.0mm NL (1)/ 5.0mm NL (1))

$10.00

5556: Slipper pressure plate & hub (aluminum alloy)

$8.00

6416: Body mount posts (2)/ body post pivot (2)/ screw pins, 2.5x18mm (2)

$5.00

6519: Receiver, micro, TQ 2.4GHz (3-channel)

$29.95

6731: Suspension arms, front/rear (left & right) (2)

$10.00

6743: Camber link set (plastic/ non-adjustable) (front &rear)

$3.00

6759: Half shafts, heavy duty (external splined (2)/ internal splined (2))/ metal u-joints (4)

$8.00

6760: Driveshaft assembly, front, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

$10.00

6761: Driveshaft assembly, rear, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

$10.00

6766: Gear clutch, complete (high stall)

$15.00

6777: Wheelie bar mounts/ rear skidplate (black)

$6.00

6788: Differential, front (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash®, Stampede®, Rustler®) (13/37 ratio)

$34.95

6789: Differential, rear (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash®, Stampede®, Rustler®) (13/37 ratio)

$34.95

6823: Bulkhead tie bars, front & rear, aluminum (blue-anodized)

$7.00

6823G: Bulkhead tie bars, front & rear, aluminum (green-anodized)

$7.00

6823R: Bulkhead tie bars, front & rear, aluminum (red-anodized)

$7.00

6828X: Differential output yokes, heavy duty (2)/ screw pin (2)

$4.00

6832: Caster blocks (c-hubs), left & right

$5.00

6832A: Caster blocks (c-hubs), 6061-T6 aluminum (orange-anodized), left & right

$39.95

6832G: Caster blocks (c-hubs), 6061-T6 aluminum (green-anodized), left & right

$39.95

6832R: Caster blocks (c-hubs), 6061-T6 aluminum (red-anodized), left & right

$39.95

6832X: Caster blocks (c-hubs), 6061-T6 aluminum (blue-anodized), left & right

$39.95

6834: Suspension pin set, complete (front and rear)

$4.00

6837: Steering blocks, left & right

$5.00

6837A: Steering blocks, 6061-T6 aluminum (orange-anodized), left & right

$26.95

6837G: Steering blocks, 6061-T6 aluminum (green-anodized), left & right

$26.95

6837R: Steering blocks, 6061-T6 aluminum (red-anodized), left & right

$26.95

6837X: Steering blocks, 6061-T6 aluminum (blue-anodized), left & right

$26.95

6838: Shock tower, rear

$6.00

6838X: Shock tower, rear, 7075-T6 aluminum (blue-anodized) (1)/ body mount bracket (1)

$25.95

6839: Shock tower, front

$6.00

6839X: Shock tower, front, 7075-T6 aluminum (blue-anodized) (1)/ body mount bracket (1)

$25.95

6842: Spur gear, 50-tooth (0.8 metric pitch, compatible with 32-pitch)

$3.00

6842R: Spur gear, 50-tooth (0.8 metric pitch, compatible with 32-pitch) (for Slash 4x4 center differential)

$3.00

6843: Spur gear, 52-tooth (0.8 metric pitch, compatible with 32-pitch)

$3.00

6843R: Spur gear, 52-tooth (0.8 metric pitch, compatible with 32-pitch) (for Slash 4x4 center differential)

$3.00

6845X: Steering bellcranks/ servo saver/ servo saver spring/ servo spring retainer/servo horn, steering

$12.00

6853X: Stub axles, rear, heavy duty (2)/pins (2)

$6.00

6854X: Stub axles, front, heavy duty (2)/ yokes (2)/ pins (4)

$8.00

6860A: Motor mount (assembled with 3x6 flat-head machine screw)/ 3.0mm NL (1)

$4.00

6879: Ring gear, differential/ pinion gear, differential (rear)

$15.00

6879R: Ring gear, differential/ pinion gear, differential (machined, spiral cut) (rear)

$39.95

6880: Housings, differential, rear

$4.00

6881: Housings, differential, front

$4.00

6882X: Gear set, differential (output gears (2)/ spider gears (2)/ spider gear shaft, carrier support)

$15.00

6883: Gear set, center differential (output gears (2)/ spider gears (2)/ spider gear shaft)

$15.00

6884: Housing, center differential/ x-ring gaskets (2)/ ring gear gasket/ bushings (2)/ 5x10x0.5 TW (2)/ CCS 2.5x8 (4)

$5.00

6888: Drive hub, center, rear (1)/ 4x3 GS (1)

$5.00

6893: Input shaft (slipper shaft)/ bearing adapter (1)/ pin (1)

$6.50

6893G: Bearing adapter, 6061-T6 aluminum (green-anodized) (1)/ 10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft)

$5.00

6893X: Bearing adapter, 6061-T6 aluminum (blue-anodized) (1)/10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft)

$5.00

7415X: Body mounts, front & rear/ body post, rear (1)

$8.00

7422: Chassis

$20.00

7423: Nerf bars, chassis (2)

$4.00

7424: Box, receiver (sealed)/ foam pads/ 2.5x12mm CS (2)/ 3x6mm CS (2)/ 3x12mm BCS (2)

$12.00

7426: Battery hold-down (1)/ hold-down retainer, front & rear (1 each)

$6.50

7426X: Battery hold-down, tall (1)/ hold-down retainer, front & rear (1 each) (allows for installation of taller, multi-cell batteries)

$6.50

7429: Bulkhead, rear

$6.00

7430X: Bulkhead, front

$6.00

7434: Body bumper, foam (low profile) (use with #7435 front skidplate)

$4.00

7435: Skidplate, front (angled for higher ground clearance) (use with #7434 foam body bumper)

$4.00

7438: Linkage, steering

$4.00

7455: Driveshaft, center, plastic (black)/ screw pin

$4.00

7457: Springs, rear (white) (progressive rate) (2)

$6.00

7458: Springs, front (white) (progressive rate) (2)

$6.00

7460A: Motor mount (assembled with 3x6 flat-head machine screw)/ 3.0mm NL (1)

$6.00

7460R: Motor mount, 6061-T6 aluminum (blue-anodized)

$36.95

7471: Tires, gravel pattern (2)/ foam inserts (2)

$18.95

7472X: Wheels, green (2)

$5.95

7473T: Tires & wheels, assembled, glued (black wheels, gravel pattern tires, foam inserts) (2) (TSM® rated)

$24.95

7477: Cover, gear/ wire retainer

$3.00

7490: Plate, motor

$7.00

7490A: Plate, motor, orange

$7.00

7490G: Plate, motor, green

$7.00

7490R: Plate, motor, red

$7.00

Ford Fiesta ST Rally (74054-4) Front Assembly Exploded View

Ford Fiesta ST Rally (74054-4) Chassis Assembly Exploded View

Ford Fiesta ST Rally (74054-4) Driveshafts Assembly Exploded View

Ford Fiesta ST Rally (74054-4) Front Assembly Exploded View

Ford Fiesta ST Rally (74054-4) Rear Assembly Exploded View

Ford Fiesta ST Rally (74054-4) Transmission Assembly Exploded View

View PDF

Enter your email address to Subscribe.