1726: Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)

1747: Nuts, 4mm nylon locking (10)

1926: Antenna caps, vinyl (2)/ antenna spool

2056: Servo, high-torque, waterproof (blue case)

2743: Set (grub) screws, 3mm hardened (12)

2745: Nuts, 3mm nylon locking (12)

3159: Screws, 3x10mm caphead machine (hex drive) (6)/ lockwashers (6)/ hex wrench

3628: Box, receiver (sealed)/ foam pad/2.5x8mm CS (4)/ 3x10mm CS (2)

3629: Seal kit, receiver box (includes o-ring, seals, and silicone grease)

3934: Body clips, heavy duty (12)

5345R: Servo horns, steering, long (2), short (2)/ linkage, steering (3x20mm turnbuckle) (2)/ rod ends (short) (4)/ hollow balls (4)

5722: Battery straps (4)

5723: Hatch post/hull water outlet/foam pads (10)/ washer (1)/ 4x8mm BCS, stainless steel/ 3x4mm BCS, stainless steel

5725: Seal, stuffing tube (1)/ push rod (1)

5728: Drive dog/ 4x3mm GS (stainless, with threadlock) (1)

5730: Trim tab (2)/ 4x12mm BCS (stainless) (4)

5733: Propeller, 42x59mm

5746X: Hardware kit, stainless steel, Spartan/DCB M41 (contains all stainless steel hardware used on Spartan and DCB M41)

5750: Body clip retainer, black (4)

5751: Body clip retainer, blue (4)

5752: Body clip retainer, red (4)

5753: Body clip retainer, green (4)

5760: Water cooling jacket, motor

5761: Motor coupler, collet style/ GS 4x3 (with threadlock) (1)/ Wrench, 10mm (2)

5764: Hull, DCB M41, white (no graphics) (fully assembled)

5765: Hatch, DCB M41, white (no graphics)/ decal sheet

5772: Radio tray/ radio tray retainer (2)/ 4x16mm BCS (stainless) (2)

5774: Drive strut

5775: Mount, drive strut (2)

5776: Propeller shaft/ flex cable, DCB M41 (380.9mm)

5777: Stuffing tube (assembled with liner)

5778: Mount, stuffing tube (upper & lower)/ 4x10mm BCS (stainless) (2)/ 3x10mm CS (stainless) (2)

5779: Rudder (127.5 mm)/ rudder arm/ hinge pin/ 3x15mm BCS (stainless) (2)/ NL 3.0 (2)/ 4x3mm BCS (stainless, with threadlock) (1)

5780: Rudder mount/ rudder pivot/ 4x14mm BCS (stainless) (4)/ NL 4.0 (2)

5781: Rudder pushrod, assembled/ servo horn/ 3x18mm BCS (stainless) (1)/ 3x15mm CS (stainless) (1)/ 3x6mm CS (stainless) (1)/ NL 3.0 (1)

5782: Motor mount/ flex cable guard, DCB M41

5786: Hull, DCB M41, orange graphics (fully assembled)

5786G: Hull, DCB M41, green-x graphics (fully assembled)

5787: Hatch, DCB M41, white (no graphics)/ decal sheet

5787G: Hatch, DCB M41, green-x graphics (for #5786G hull)

6533: Receiver, micro, TQi 2.4GHz with telemetry & TSM® (5-channel)