Bigfoot No. 1 Brushless (36334-4) Chassis Assembly Exploded View

1654X: Wheel hubs, hex (blue-anodized, lightweight aluminum) (2)/ axle pins(2)

$9.00

1726: Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)

$1.00

1747: Nuts, 4mm nylon locking (10)

$2.00

1747G: Nuts, aluminum, flanged, serrated (4mm) (green-anodized) (4)

$7.50

1747P: Nuts, 4mm flanged nylon locking (aluminum, pink anodized) (4)

$7.50

1747R: Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4)

$7.50

1834: Body Clips (12) (standard size)

$2.00

1926: Antenna caps, vinyl (2)/ antenna spool

$2.00

1951R: Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2) (fits 2WD Rustler®/Stampede®)

$69.95

1985: PTFE-coated Washers, 5x8x0.5mm (20) (use with ball bearings)

$2.00

2381X: Main diff with steel ring gear/ side cover plate/ screws (Bandit, Stampede®, Rustler®)

$6.00

2382: Planet gears (4)/ planet shafts (4)/ sun gears (2)/sun gear alignment shaft (1) all hardened steel

$6.00

2388X: Planetary gear differential with steel ring gear (complete) (fits Bandit, Stampede®, Rustler®)

$15.00

2419: Gear, 19-T pinion (48-pitch) / set screw

$3.00

2421: Gear, 21-T pinion (48-pitch) / set screw

$3.00

2542: Screws, 4x12mm countersunk machine (hex drive) (6)

$2.50

2552: Screws, 3x12mm countersunk machine (6) (hex drive)

$2.50

2554: Screws, 3x6mm caphead machine (hex drive) (6)

$2.50

2567: Screws, 3x23mm roundhead machine (6)

$1.50

2575: Screws, 3x6mm button-head machine (hex drive) (6)

$2.50

2576: Screws, 3x8mm button-head machine (hex drive) (6)

$2.50

2578: Screws, 3x12mm button-head machine (hex drive) (6)

$2.50

2579: Screws, 3x15mm button-head machine (hex drive) (6)

$2.50

2580: Screws, 3x20mm button-head machine (hex drive) (6)

$2.50

2582: Screws, 3x30mm button-head machine (hex drive) (6)

$2.50

2586: Screws, 3x15mm cap-head machine (hex drive) (6)

$2.50

2587: Screws, 3x10mm caphead machine (6) (no washer)

$2.50

2591: Screws, 3x23mm button-head machine (hex drive) (6)

$2.50

2592: Screws, 3x40mm button-head machine (hex drive) (6)

$3.00

2593: Screws, 3x14mm button-head machine (hex drive) (6)

$3.00

2754: Stub axle pins (4)

$1.00

3195: Top drive gear, steel (22-tooth)

$3.00

3383: BL-2s™ Electronic Speed Control, waterproof (brushless) (fwd/rev/brake)

$79.95

3384: Motor, BL-2s™ 3300, brushless

$39.95

3614X: Body mounts, front & rear (for clipless body mounting)

$8.00

3622R: Main chassis (grey) (164mm long battery compartment) (fits both flat and hump style battery packs) (use only with #3626R ESC mounting plate)

$10.00

3622X: Main chassis (black) (164mm long battery compartment) (fits both flat and hump style battery packs) (use only with #3626R ESC mounting plate)

$10.00

3623-BLK: Skid plates, front & rear (black)

$7.00

3623-BLUE: Skid plates, front & rear (blue)

$7.00

3626R: Mounting plate, electronic speed control/receiver box (for installation of XL-5/VXL and waterproof receiver box into Stampede®)

$3.00

3627X: Battery hold-down (grey) (1) / receiver hold-down (grey) (1) / metal posts (2)/ spacers (2)/ body clips (2)/ servo tape/ adhesive foam pad

$5.00

3628: Box, receiver (sealed)/ foam pad/2.5x8mm CS (4)/ 3x10mm CS (2)

$12.00

3629: Seal kit, receiver box (includes o-ring, seals, and silicone grease)

$4.00

3638R: Shock tower (rear) (for clipless body mounting)

$4.50

3642X: Shoulder screws, Ultra Shocks (3x12 hex drive) (6)

$3.00

3647: Nuts, 4mm flanged nylon locking (steel, serrated) (8)

$3.25

3652P: Stub axle carriers, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (pink-anodized)/ 5x11mm ball bearings (4)

$29.95

3655G: Suspension arms, green, front/rear (left & right), heavy duty (2)

$12.00

3655L: Suspension arms, red, front/rear (left & right), heavy duty (2)

$12.00

3655P: Suspension arms, blue, front/rear (left & right), heavy duty (2)

$12.00

3655R: Suspension arms, front/rear (left & right), heavy duty (2)

$12.00

3655T: Suspension arms, orange, front/rear (left & right), heavy duty (2)

$12.00

3656: Grille, Bigfoot® No. 1, (chrome)/ decals/ adhesive tape

$10.00

3660X: Body, Bigfoot® No. 1 (clear, requires painting)/ window masks/ decal sheet (requires #3747 body support for clipless mounting)

$34.95

3662: Body accessories kit, Bigfoot® No. 1, (includes winch, front and rear bumpers, roll bar, light bar, engine detail & mounting hardware) (grille sold separately)

$20.00

3663: Tires & wheels, assembled, glued (satin chrome wheels, Terra Groove dual profile tires, foam inserts) (electric rear) (2)

$29.95

3663X: Tires & wheels, assembled, glued (chrome wheels, Terra Groove dual profile tires, foam inserts) (electric rear) (2)

$29.95

3667: Tires, Terra Groove (dual profile 5.3"x2.7"- 2.0") (2)/ foam inserts (2)

$19.95

3668: Tires & wheels, assembled, glued (2.8") (All-Star chrome wheels, Talon tires, foam inserts) (electric rear) (2)

$25.95

3668A: Tires & wheels, assembled, glued (2.8") (All-Star black chrome wheels, Talon tires, foam inserts) (electric rear) (2) (TSM® rated)

$26.95

3671: Tires, Talon 2.8" (2)/ foam inserts (2)

$18.95

3672: Wheels, chrome (2.2'') (rear) (2)

$5.95

3674: Wheels, dyable nylon 2.2" (rear) (2)

$3.95

3677: Wheelie bar mount (1)/ hardware (Stampede®, Rustler®, Bandit series)

$4.00

3677A: Wheelie bar mount (1) / hardware (green)

$4.00

3677P: Wheelie bar mount (1) / hardware (pink)

$4.00

3677X: Wheelie bar mount (1) / hardware (blue)

$4.00

3678: Wheelie bar, assembled (black) (fits Slash®, Stampede®, Rustler®, Bandit® series)

$15.00

3678A: Wheelie bar, assembled (green) (fits Slash®, Stampede®, Rustler®, Bandit® series)

$15.00

3678P: Wheelie bar, assembled (pink) (fits Slash, Stampede®, Rustler®, Bandit series)

$15.00

3678X: Wheelie bar, assembled (blue) (fits Stampede®, Rustler®, Bandit series)

$15.00

3691: Gearbox halves (L&R) (black) w/ idler gear shaft

$8.00

3691A: Gearbox halves (L&R) (grey) w/ idler gear shaft

$8.00

3695: Transmission, complete (fits 1/10-scale 2WD Rustler®, Bandit®, Stampede®, Slash®)

$79.95

3696: Idler gear, steel (30-tooth)

$3.00

3747: Body support (with front & rear latches)/ 2.6x15mm BCS (6) (for clipless body mounting)

$8.00

3762A: Ultra Shocks (grey) (xx-long) (complete w/ spring pre-load spacers & springs) (rear) (2)

$18.00

3772: Wheels, All-Star 2.8" (chrome) (Rustler®, Stampede® rear only)

$7.95

3772A: Wheels, All-Star 2.8" (black chrome) (electric rear)

$8.95

3785: Motor, Titan® 12T (12-Turn, 550 size)

$25.95

3790: Gear adapter, fixed

$4.50

3792: Cover, gear/ rubber gear cover plug/ 3x6 RM (2)

$3.50

3793: Input shaft (slipper shaft) / spring pin

$3.00

3931: Screws, 3x8mm flat-head machine (hex drive) (6)

$2.50

3965: Screws, 2.5x8mm cap-head machine (6)

$2.50

4683: Spur gear, 83-tooth (48-pitch) (for models with Torque Control slipper clutch)

$3.00

4686: Spur gear, 86-tooth (48-pitch) (for models with Torque-Control slipper clutch)

$3.00

4690: Spur gear, 90-tooth (48-pitch) (for models with Torque-Control slipper clutch)

$3.00

4974: Wheelie Bar arm (1)/ connector (1)/ 3x12 SS (hex drive) (4)

$10.00

4976: Wheels (4)/ Axles (2), for Maxx® Wheelie Bar

$4.00

5116: Ball bearings, blue rubber sealed (5x11x4mm) (2)

$3.50

5116A: Ball bearings, black rubber sealed (5x11x4mm) (2)

$3.50

5185: Tires, rubber (2) (fits Traxxas® wheelie bar wheels)

$7.00

5186: Wheels, aluminum (red-anodized) (2)/ 5x8mm ball bearings (4)/ axles (2)/ rubber tires (2)

$19.95

5529: Shim set, 3x7x1mm (2), 3x6x0.5mm (4), 3x7x2mm (2)/ hollow balls, captured (4)

$3.50

5552X: Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/ pin/ 4.0mm NL (1)/ 5.0mm NL (1))

$10.00

5556: Slipper pressure plate & hub (aluminum alloy)

$8.00

6519: Receiver, micro, TQ 2.4GHz (3-channel)

$29.95

6770: Tires, Maxx® 2.8" (2)/ foam inserts (2)

$18.95

6828A: Differential output yoke assembly, extreme heavy duty (2) (left or right, front or rear) (assembled with external-splined half shaft)/ screw pin (2)

$8.00

6852A: Driveshaft assembly, rear, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

$12.00

6852R: Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2)

$69.95

6853A: Stub axle assembly, rear, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft)

$6.00

8361: Shock caps (black) (4) (assembled with hollow balls)

$5.00

9142: Suspension pin set, extreme heavy duty, complete (front and rear) (2.5x26mm (4), 3x32mm (2), 3x40mm (2), 3x46mm (2)) (for use with #9180, 9181, 9182 upgrade kit)

$4.00

9150: Carriers, stub axle, rear, extreme heavy duty, black (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)

$6.00

9150-BLUE: Carriers, stub axle, rear, extreme heavy duty, blue (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)

$6.00

9150-GRAY: Carriers, stub axle, rear, extreme heavy duty, gray (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)

$6.00

9150-GRN: Carriers, stub axle, rear, extreme heavy duty, green (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)

$6.00

9194: Camber links, rear (molded composite) (82mm center to center) (2) (assembled with hollow balls) (for use with #9180 upgrade kit)

$5.00

Bigfoot No. 1 Brushless (36334-4) Chassis Assembly Exploded View

Bigfoot No. 1 Brushless (36334-4) Body Assembly Exploded View

Bigfoot No. 1 Brushless (36334-4) Chassis Assembly Exploded View

Bigfoot No. 1 Brushless (36334-4) Front Assembly Exploded View

Bigfoot No. 1 Brushless (36334-4) Rear Assembly Exploded View

Bigfoot No. 1 Brushless (36334-4) Transmission Assembly Exploded View

View PDF

Enter your email address to Subscribe.