Bandit (24254-8) Chassis Assembly Exploded View

1548: Set (grub) screws, 3x4mm (8)/ 4x4mm (stainless) (4)

$2.00

1651: Half-shafts (internal-splined (2)/external-splined (2))/ metal U-joints (4)

$6.00

1726: Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)

$1.00

1747: Nuts, 4mm nylon locking (10)

$2.00

1747A: Nuts, aluminum, flanged, serrated (4mm) (red-anodized) (4)

$7.50

1747G: Nuts, aluminum, flanged, serrated (4mm) (green-anodized) (4)

$7.50

1747P: Nuts, 4mm flanged nylon locking (aluminum, pink anodized) (4)

$7.50

1747R: Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4)

$7.50

1747T: Nuts, aluminum, flanged, serrated (4mm) (orange-anodized) (4)

$7.50

1834: Body Clips (12) (standard size)

$2.00

1926: Antenna caps, vinyl (2)/ antenna spool

$2.00

1985: PTFE-coated Washers, 5x8x0.5mm (20) (use with ball bearings)

$2.00

2380: Differential, complete (fits 1/10-scale 2WD Rustler®, Bandit, Stampede®, Slash®)

$14.95

2381X: Main diff with steel ring gear/ side cover plate/ screws (Bandit, Stampede®, Rustler®)

$6.00

2382: Planet gears (4)/ planet shafts (4)/ sun gears (2)/sun gear alignment shaft (1) all hardened steel

$6.00

2388X: Planetary gear differential with steel ring gear (complete) (fits Bandit, Stampede®, Rustler®)

$15.00

2414: Wing wire

$2.00

2417: Body, Bandit (front & rear) (clear, requires painting)/ window, lights, grille decal sheet

$19.95

2421: Gear, 21-T pinion (48-pitch) / set screw

$3.00

2470: Tires, Alias® 2.2" (rear) (2)/ foam inserts (Bandit) (soft compound)

$14.95

2470A: Tires & wheels, assembled (Tracer 2.2" black chrome wheels, Alias® 2.2" tires) (2) (Bandit rear, medium compound with foam inserts) (TSM® rated)

$22.95

2470G: Tires & wheels, assembled (2.2" black, satin chrome beadlock wheels, Alias® 2.2" tires) (2) (Bandit® rear, medium compound with foam inserts)

$24.95

2470R: Tires & wheels, assembled (Tracer 2.2" chrome wheels, Alias® 2.2" tires) (2) (Bandit rear, medium compound with foam inserts)

$22.95

2470T: Tires & wheels, assembled (2.2" black chrome wheels, Alias® 2.2" tires) (2) (Bandit® rear, medium compound with foam inserts)

$24.95

2472: Wheels, Tracer 2.2" (chrome) (2) (Bandit rear)

$7.95

2472A: Wheels, Tracer 2.2" (black chrome) (2) (Bandit rear)

$8.95

2478: Tires, Anaconda® 2.2" (rear) (2)/ foam inserts (Bandit) (soft compound)

$15.95

2478A: Tires & wheels, assembled (Tracer 2.2" black chrome wheels, Anaconda® 2.2" tires with foam inserts) (2) (Bandit rear)

$22.95

2478G: Tires & wheels, assembled (2.2" black, satin chrome beadlock wheels, Anaconda® 2.2" tires with foam inserts) (2) (Bandit® rear)

$24.95

2478R: Tires & wheels, assembled (Tracer 2.2" chrome wheels, Anaconda® 2.2" tires with foam inserts) (2) (Bandit rear)

$21.95

2478T: Tires & wheels, assembled (2.2" black chrome wheels, Anaconda® 2.2" tires with foam inserts) (2) (Bandit® rear)

$24.95

2480: Wheels, 2.2" (black, satin chrome beadlock) (2) (Bandit® rear)

$12.00

2480A: Wheels, 2.2" (black chrome) (2) (Bandit® rear)

$12.50

2542: Screws, 4x12mm countersunk machine (hex drive) (6)

$2.50

2552: Screws, 3x12mm countersunk machine (6) (hex drive)

$2.50

2554: Screws, 3x6mm caphead machine (hex drive) (6)

$2.50

2575: Screws, 3x6mm button-head machine (hex drive) (6)

$2.50

2576: Screws, 3x8mm button-head machine (hex drive) (6)

$2.50

2578: Screws, 3x12mm button-head machine (hex drive) (6)

$2.50

2579: Screws, 3x15mm button-head machine (hex drive) (6)

$2.50

2580: Screws, 3x20mm button-head machine (hex drive) (6)

$2.50

2582: Screws, 3x30mm button-head machine (hex drive) (6)

$2.50

2587: Screws, 3x10mm caphead machine (6) (no washer)

$2.50

2591: Screws, 3x23mm button-head machine (hex drive) (6)

$2.50

2593: Screws, 3x14mm button-head machine (hex drive) (6)

$3.00

2615: Wing buttons (2)/ set screws (2)/ spacers (2)/ 3x8mm CS (2)

$2.50

2743: Set (grub) screws, 3mm hardened (12)

$3.00

2751: Half-shaft pro-pack (intemal-splined (6)/extemal (6)) (plastic shafts only)

$10.00

2753X: Stub axles, rear (2)

$5.00

2754: Stub axle pins (4)

$1.00

2758: Suspension arms, black (rear, left & right), heavy duty

$10.00

2758-BLUE: Suspension arms, blue (rear, left & right), heavy duty

$10.00

2758-GRN: Suspension arms, green (rear, left & right), heavy duty

$10.00

2758-ORNG: Suspension arms, orange (rear, left & right), heavy duty

$10.00

2758-RED: Suspension arms, red (rear, left & right), heavy duty

$10.00

3018R: XL-5 Electronic Speed Control, waterproof (land version, low-voltage detection, fwd/rev/brake)

$59.95

3195: Top drive gear, steel (22-tooth)

$3.00

3628: Box, receiver (sealed)/ foam pad/2.5x8mm CS (4)/ 3x10mm CS (2)

$12.00

3629: Seal kit, receiver box (includes o-ring, seals, and silicone grease)

$4.00

3638X: Shock tower (rear)

$4.50

3647: Nuts, 4mm flanged nylon locking (steel, serrated) (8)

$3.25

3652P: Stub axle carriers, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (pink-anodized)/ 5x11mm ball bearings (4)

$29.95

3685: White plastic washers (5x8x1.0mm) (6)

$2.50

3691: Gearbox halves (L&R) (black) w/ idler gear shaft

$8.00

3691A: Gearbox halves (L&R) (grey) w/ idler gear shaft

$8.00

3695: Transmission, complete (fits 1/10-scale 2WD Rustler®, Bandit®, Stampede®, Slash®)

$79.95

3696: Idler gear, steel (30-tooth)

$3.00

3725R: Mounting plate, electronic speed control (for installation of XL-5/VXL into Bandit or Rustler®)

$3.00

3727: Battery hold-down plate (black)/ metal posts (2)/body clips (2)

$3.00

3727A: Battery hold-down plate (grey) / metal posts (2) / body clips (2)

$3.00

3728: Lower chassis (black) (166mm long battery compartment) (fits both flat and hump style battery packs)

$15.00

3728A: Lower chassis (gray) (166mm long battery compartment) (fits both flat and hump style battery packs)

$15.00

3762A: Ultra Shocks (grey) (xx-long) (complete w/ spring pre-load spacers & springs) (rear) (2)

$18.00

3775: Bushings, self-lubricating (5x8x2.5mm) (12)

$5.00

3785: Motor, Titan® 12T (12-Turn, 550 size)

$25.95

3790: Gear adapter, fixed

$4.50

3792: Cover, gear/ rubber gear cover plug/ 3x6 RM (2)

$3.50

3793: Input shaft (slipper shaft) / spring pin

$3.00

3931: Screws, 3x8mm flat-head machine (hex drive) (6)

$2.50

3965: Screws, 2.5x8mm cap-head machine (6)

$2.50

4628: Differential output yokes (2)/ 3x5mm countersunk screws (2)/ 3mm set (set) screws (4)

$4.00

4628R: Differential output yokes, black (2)/ 3x5mm countersunk screws (2)/ screw pin (2)

$4.00

4628X: Differential output yokes, hardened steel (w/ U-joints) (2)

$19.50

4676: Spur gear, 76-tooth (48-pitch) (for models with Torque Control slipper clutch)

$3.00

4683: Spur gear, 83-tooth (48-pitch) (for models with Torque Control slipper clutch)

$3.00

4686: Spur gear, 86-tooth (48-pitch) (for models with Torque-Control slipper clutch)

$3.00

4690: Spur gear, 90-tooth (48-pitch) (for models with Torque-Control slipper clutch)

$3.00

5116: Ball bearings, blue rubber sealed (5x11x4mm) (2)

$3.50

5116A: Ball bearings, black rubber sealed (5x11x4mm) (2)

$3.50

5347: Rod ends, Revo® (large) with hollow balls (12)

$9.00

5552X: Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/ pin/ 4.0mm NL (1)/ 5.0mm NL (1))

$10.00

5556: Slipper pressure plate & hub (aluminum alloy)

$8.00

6519: Receiver, micro, TQ 2.4GHz (3-channel)

$29.95

8361: Shock caps (black) (4) (assembled with hollow balls)

$5.00

9142: Suspension pin set, extreme heavy duty, complete (front and rear) (2.5x26mm (4), 3x32mm (2), 3x40mm (2), 3x46mm (2)) (for use with #9180, 9181, 9182 upgrade kit)

$4.00

9150: Carriers, stub axle, rear, extreme heavy duty, black (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)

$6.00

9150-BLUE: Carriers, stub axle, rear, extreme heavy duty, blue (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)

$6.00

9150-GRAY: Carriers, stub axle, rear, extreme heavy duty, gray (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)

$6.00

9150-GRN: Carriers, stub axle, rear, extreme heavy duty, green (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)

$6.00

9190: Camber links, rear (molded composite) (56mm center to center) (2) (assembled with hollow balls) (for use with #9182 upgrade kit)

$5.00

9450R: Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2)

$79.95

Bandit (24254-8) Chassis Assembly Exploded View

Bandit (24254-8) Front Assembly Exploded View

Bandit (24254-8) Rear Assembly Exploded View

Bandit (24254-8) Transmission Assembly Exploded View

View PDF

Enter your email address to Subscribe.