1726: Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)

1747: Nuts, 4mm nylon locking (10)

1926: Antenna caps, vinyl (2)/ antenna spool

2056: Servo, high-torque, waterproof (blue case)

2745: Nuts, 3mm nylon locking (12)

3159: Screws, 3x10mm caphead machine (hex drive) (6)/ lockwashers (6)/ hex wrench

3628: Box, receiver (sealed)/ foam pad/2.5x8mm CS (4)/ 3x10mm CS (2)

3629: Seal kit, receiver box (includes o-ring, seals, and silicone grease)

3934: Body clips, heavy duty (12)

5345R: Servo horns, steering, long (2), short (2)/ linkage, steering (3x20mm turnbuckle) (2)/ rod ends (short) (4)/ hollow balls (4)

5711X: Hull, Spartan, white (no graphics) (fully assembled)

5712X: Hatch, Spartan, white (no graphics)

5722: Battery straps (225mm) (4)

5723: Hatch post/hull water outlet/foam pads (10)/ washer (1)/ 4x8mm BCS, stainless steel/ 3x4mm BCS, stainless steel

5724R: Radio tray with RPM mount/ radio tray retainer (2)/ stuffing tube clamp/ 4x16mm BCS (stainless) (2)/ 4x10mm BCS (stainless) (2)

5725: Seal, stuffing tube (1)/ push rod (1)

5726: Mount, drive strut (2)

5730: Trim tab (2)/ 4x12mm BCS (stainless) (4)

5732: Turn fins, left & right/ 4x12mm BCS (stainless) (4)

5734: Stuffing tube (assembled with liner)

5740: Rudder/ rudder arm/ hinge pin/ 3x15mm BCS (stainless) (2)/ NL 3.0 (2)/4x3mm GS (stainless, with threadlock) (1)

5741: Rudder pushrod, assembled/ servo horn/ 3x18mm BCS (stainless) (1)/ 3x15mm CS (stainless) (1)/ 3x6mm CS (stainless) (1)/ NL 3.0 (1)

5750: Body clip retainer, black (4)

5751: Body clip retainer, blue (4)

5752: Body clip retainer, red (4)

5753: Body clip retainer, green (4)

5760: Water cooling jacket, motor

5761: Motor coupler, collet style/ GS 4x3 (with threadlock) (1)/ Wrench, 10mm (2)