The store will not work correctly when cookies are disabled.
JavaScript seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Javascript in your browser.
×
This website uses cookies to enhance your user experience.
Your interactions and personal data may be collected on our website by us and our partners in accordance with our
Privacy Policy .
Allow Cookies
4-Tec 3.0 Toyota Supra BL-2s
MODEL SPECS
Name:
Toyota GR Supra GT4
Type:
On-Road Cars
Top Speed:
35+ mph
Skill Level:
1
Scale:
1/10
Length:
19.3 inches (490 mm)
Width:
8.6 inches (219 mm)
Height:
5.6 inches (141 mm)
Weight:
3.92 lbs (1.78 kg)
Front Track:
8.0 inches (204 mm)
Rear Track:
8.0 inches (204 mm)
Wheelbase:
10.7 inches (272 mm)
Ground Clearance:
0.5 inches (14 mm)
Driveline:
Shaft-driven AWD
Transmission:
Single speed direct drive
Differential Type:
Sealed, hardened steel bevel, limited slip
Gear Pitch:
48
Steering Servo:
2075 digital high-torque waterproof
Radio System:
TQ™ 2.4 GHz 2-channel transmitter
Battery Compartment Specs:
174 mm X 48 mm X 23 mm or 26 mm
MOTOR SPECS
Name:
BL-2s 3300 Kv
Motor Type:
Sensorless brushless
Weight:
7.51 ounces (213 g)
Length:
3.15 inches (80 mm)
Diameter:
1.42 inches (36 mm)
Shaft Size:
3 mm
Connector Type:
Traxxas Quick Connect Motor Plug
ESC SPECS
Name:
BL-2s Electronic Speed Control
ESC Type:
Brushless
Case Size:
1.53″ (39 mm) x 2.31″ (59 mm) x 1.21″ (31 mm)
Weight:
3.07 ounces (87 g)
Motor Connectors:
Traxxas Quick Connect Motor Plug
Battery Connectors:
Traxxas High Current Connector
Available for purchase and resale only in the US (excluding HI), Mexico, Puerto Rico, and U.S. Virgin Islands
Officially Licensed Toyota GR Supra GT4 Body
Clipless body eliminates body post holes
Injection molded details
Grilles, hood vent, side mirrors, exhaust tips, and wing
Replica black multi-spoke wheels with lug nut detail
Replica brake discs with red calipers
Clipless Body Mounts
Easy removal of the body
Front bumper/splitter incorporates the front body mount
BL-2s™ Waterproof Electronic Speed Control
Heat sink accepts accessory cooling fan (3340)
Three Programmable Drive Profiles
Sport Mode - Forward / Brake / Reverse
Race Mode - Forward / Brake
Training Mode™ - 50% Forward / Brake / 50% Reverse (patented)
Traxxas EZ-Set® one-button setup
Built-in two-stage low-voltage detection for LiPo batteries
NiMH battery packs: 6-7 cells (7.2 to 8.4 volts)
LiPo battery packs: 2 cells (7.4 volts)
3300 Kv Brushless Motor
Integrated cooling fan
Low-maintenance design
Efficient ball bearings
Steering
High-torque waterproof Traxxas 2075 servo
Precise servo saver integrated into servo horn
High steering angle option
Low Center of Gravity (Low CG) Chassis
Positions weight low for improved handling
Smooth underside resists drag and snags
Angled front bumper improves approach angle
Modular interlocking chassis pieces
Improves rigidity and tightens tolerances
Allows for easy maintenance
High Performance Suspension
Captured links won’t pop off
Geometry tuned for precise handling
Dual rear camber link mounts
Adjustable droop
Adjustable Battery Hold Down
Easy, secure battery installation
Swivels to allow different height batteries
Locks securely without pins or parts to lose
Driveline
Full-time shaft driven all-wheel drive
Steel center driveshaft with center bearing support
Direct drive
Sealed, silicone-filled differential
Brushless ready for easy Velineon brushless power upgrade
Wheels and Tires
Replica Toyota GR Supra GT4 black multi-spoke wheels
High-performance racing slicks with long-wearing compound
Ultra-wide racing slicks provide ultimate traction
Replica brake discs incorporate standard 12mm wheel hexes
Brake calipers can be mounted in forward or trailing edge positions
Springs and Shocks
Fully adjustable oil-filled Ultra Shocks™ with X-ring technology
Red powder coated shock springs feature a responsive spring rate
Rubber-Sealed Ball Bearings
Requires Traxxas 7-Cell NiMH “flat pack” or 2-Cell LiPo Battery and Charger (Sold Separately)
MODEL 93164 : 4-Tec® Toyota GR Supra GT4: fully assembled, Ready-To-Race® , with TQ™ 2.4 GHz radio system, BL-2s™ Brushless Power System, and clipless pre-painted replica body.
What’s In The Box:
Traxxas GR Supra GT4, Ready-To-Race Model TQ 2.4 GHz Radio System Quick Start Guide High Quality Maintenance Tools
What You’ll Need:
Battery Pack
GR Supra GT4 requires the use of a 7-Cell NiMH “flat pack” or 2-Cell LiPo Battery equipped with a Traxxas High Current Connector
Charger
Traxxas EZ-Peak® Plus (model 2970) recommended
Alkaline Batteries
Four AA alkaline batteries for the transmitter
TOYOTA GR SUPRA GT4
The Traxxas 1/10 scale GR Supra GT4 captures the muscular curves and fine detail of the Toyota Supra with the proven performance of the Traxxas 4-Tec® 3.0 chassis. Feel the surge as BL-2s brushless power rockets GR Supra off the line with AWD grip and exhilarating 35+ mph top speed. Ultra-wide racing slicks hold tight in the corners with a double-link suspension and oil-filled shocks to soak up the bumps. The 1/10 scale GR Supra GT4 replica delivers fun, thrills, and rugged RC performance from Traxxas – The Fastest Name in Radio Control® .
BL-2S BRUSHLESS POWER SYSTEM
The BL-2s™ brushless power system ramps up the fun with up to 60% more speed and faster acceleration than comparable brushed power systems. Improved efficiency, high-speed ball bearings, and an internal cooling fan allow 4-Tec Supra to run battery after battery for all-day fun. With no brushes to wear out, the BL-2s 3300 Kv is long-lasting and requires virtually no maintenance.
RACE-BRED STYLING
Toyota’s 60+ years of racing experience transformed the Supra platform into a track-dominating GT4 race car. Traxxas faithfully captures the essence of the GR Supra GT4’s racing pedigree down to the smallest detail. Replica aero trim, molded scale parts, and wide racing slicks provide an RC racing experience like no other.
Clipless Body Mounting
Traxxas’ exclusive clipless body mounting system maintains the uninterrupted clean lines and functional aero of the Supra's exotic shape. The uniquely engineered clipless frame with its integrated quick release latch system secures the body invisibly. The hidden mechanism delivers a firm and incredibly rugged hold and releases in seconds to provide chassis access.
INNOVATION
4-Tec Supra captures the excitement of the full-size GR Supra GT4 in exacting detail, with performance to match.
4-Tec 3.0
Supra’s 3.0-spec chassis is longer than the previous 4-Tec with an extended wheelbase, larger wheels and tires, and a wider track to enhance stability and handling. Proven Ultra Shocks deliver road-tuned handling with full adjustability.
Clipless Body Mounting System
No posts, no clips—just drop the body onto the chassis and snap into place for a perfect stance and secure hold. When you need to access the chassis, simply depress the tabs under the chassis and lift up. Patent Pending
Replica GT4-Spec Wing
Race cars need functional aero to reduce drag and provide high-speed downforce. The 4-Tec Supra accurately replicates the full-size car’s front splitter and rear wing with tough molded composite pieces for a truly authentic look.
All-Wheel Drive
A highly efficient shaft-driven all-wheel drive system rides on sealed bearings and provides maximum acceleration and responsiveness.
Modular Simplicity
Rigid Traxxas modular design utilizes three precision engineered modules to provide unprecedented stiffness and tight tolerances.
Adjustable Battery Hold Down
A quick-release, dual-height battery mount accommodates a wide range of batteries including long format NiMH and LiPo battery packs.
Waterproof All-Weather Performance
Race fearlessly in the rain and slide your Supra on wet pavement for realistic “skidpad” driving—Traxxas waterproof electronics take splashes in stride.
Replica Race Wheels
The Supra’s black multi-spoke wheels and ultra-wide slick tires recreate the GT4’s racing rubber while providing improved stability and handling. The wider wheels and tires fill the fenders to duplicate the GT4’s race-ready stance. With equal-width tires front and rear, steering response is predictable and aggressive thanks to the wide design and sticky tire compound.
BL-2s Brushless Power
The BL-2s™ brushless power system ramps up the fun with up to 60% more speed and faster acceleration than comparable brushed power systems. Improved efficiency, high-speed ball bearings, and an internal cooling fan allow 4-Tec Supra to run battery after battery for all-day fun. With no brushes to wear out, the BL-2s 3300 Kv is long-lasting and requires virtually no maintenance.
Precision 2.4 GHz Control Radio System
With the TQ™ 2.4 GHz radio system, you just switch it on and drive. There are no channels or frequencies to manage, so the focus is on having fun. The TQ’s ergonomic design is comfortable for all-day driving, and its sleek lines are enhanced by an internal antenna that is impervious to damage.
DETAILS
Look beneath the GR Supra GT4’s race-inspired lines to reveal the individual design details that make the 4-Tec 3.0 chassis as easy to operate as it is exciting to drive.
Detailed Replica Body
Countless hours of aero testing allow the GR Supra GT4 race car to slice through the wind with dagger-like precision. Traxxas accurately recreates both the beauty and form of the full-size car down to the smallest details. The injection molded grilles, side mirrors, and wing set the Traxxas Supra’s tough polycarbonate body apart with elevated scale realism.
New Clipless Body Mounting System
The Supra’s sculpted body incorporates mounts into the internal frame. Traditional body posts have been eliminated leaving only the sleek lines of the GT4 race car. When it’s time to change the battery, just reach under the car to release the secure front and rear latches and the entire body releases in seconds.
Replica Wheels and Tires
The Supra’s 2.0″ multi-spoke wheels and meaty racing rubber are taller than the standard 4-Tec 2.0 for increased stability and improved handling.
Oil-Filled Ultra Shocks
4-Tec 3.0 rides on oil-filled Ultra Shocks utilizing X-ring technology for a perfect seal and silky-smooth performance. They are fully tunable with a wide range of oils, springs, and pistons. Features include pressure bladders for air/oil separation and spring clips to precisely change the ride height and spring pre-load. Redesigned shock caps feature hollow balls for better articulation and durability.
High Performance Suspension Adjustments
The 4-Tec’s high performance suspension features bosses molded into the arms to adjust droop. Suspension droop is the amount of downward travel on the wheels. Droop adjustment allows the 4-Tec 3.0 to be tuned for better stability in the corners.
Integrated Servo Saver
Conventional servo savers earned a reputation for sloppy steering in on-road cars. The 4-Tec 3.0 incorporates the servo saver into the horn for precise and responsive handling in all situations. An integrated collar allows the spring tension to be adjusted for personalized settings or track conditions.
High-Torque Waterproof Steering Servo
A high-performance race car needs a powerful steering servo for responsive performance, and Traxxas delivers with the 2075 high-torque servo. This waterproof steering servo uses O-ring seals to keep the fun going when things get wet. Waterproof for all-weather action, the 2075 provides 125 oz-in of steering muscle.
Waterproof Receiver Box
Real world driving requires dealing with the elements. The 4-Tec 3.0 comes fully protected with a patented waterproof receiver box. The innovative receiver box keeps the micro receiver dry, even in the worst weather.
Molded Wire Retainer
A simple wire clip would look out of place with this futuristic high tech chassis. Traxxas engineers designed a trick molded wire retainer to keep wiring secured safely out of the way.
High-Current Connector
The Traxxas High-Current Connector funnels maximum power from your battery to the 4-Tec’s electronics. This innovative connector also enables your iD-equipped charger and battery to communicate. This ensures optimum charge settings specific to your battery for quicker, safer, more complete charging and extended battery life.
Fixed Gear Mesh System
4-Tec 3.0 makes it easy to set gear mesh with precision thanks to the innovative fixed gear positioning system. Use the convenient chart included in the user manual to select the proper locations for the motor mounting plate based on the selected spur and pinion gears. And, when the action gets rough on-track, the fixed gear system holds firm to prevent gear damage under impacts.
Hex Hardware
4-Tec 3.0 uses pro-quality, high-grade, metric hex-drive hardware throughout for extra strength and easy maintenance and repair. The black-oxide rust-resistant finish provides a high tech look and feel.
Rubber-Sealed Ball Bearings
Precise rubber-sealed bearings offer super low-friction performance and maximum protection in dusty environments. These virtually maintenance free bearings are used in all exposed locations on the car.
One-Piece Driveshafts
One-piece steel driveshafts save weight and send power directly to the wheels for lightning quick response times. Extended drive cups allow for maximum articulation and ultimate durability.
Steel Center Driveshaft
4-Tec 3.0 distributes power to all four wheels through a one-piece center driveshaft. There are no dogbones to wear and no drive cups to wobble. The steel driveshaft runs straight and true with a center support bearing to handle the high RPM of Velineon brushless upgrades.
Fully Authentic Look
Bold red brake calipers highlight the Supra’s race-bred performance with replica brake discs. The brake calipers even switch from leading to trailing orientation to give your ride that fully authentic look.
Proven Sealed Differentials
4-Tec 3.0 features the same sealed, beveled-gear differential in the front and rear as the ultra-rugged Slash® 4X4. Tune the performance by varying the viscosity of the fluid inside.
