Resources
Forum
Parts List
Exploded Views
Manuals
Instructions
2-Speed Shift Point Adjustment
Adjust the body posts
Air Filter
Bent shock shaft
Body rubs when cornering
Bushings in the steering bellcranks are worn
Carburetor Care
Changing the shift point for different gear ratios
Clicking sound and wheels don't turn (Steering)
Complete T-Maxx Performance Guide (Part 1)
Complete T-Maxx Performance Guide (Part 2)
Complete T-Maxx Performance Guide (Part 3)
Cutting ventilation holes in the body
Drive Train Binding
Excessive steering slop
EZ-Start turns but engine does not rotate
Factory Carburetor Settings for TRX 2.5, 2.5R and 3.3
Failed Servo
Glow Plugs
Grinding noise from the differential
How big is the fuel tank?
How do I set the Gear Mesh on my Traxxas Model?
How To - Maintaining and Storing Your Traxxas Nitro Model
How To Adjust the Slipper Clutch
How To Adjust the Steering Trim
How to Clean a gummed engine
How To Clean and Maintain the Roller Clutch (One-Way Bearing)
How To Clean and Re-oil the Air Filter
How To Clear a Flooded Engine
How To Glue Tires To Wheels
How to install u-joints
How to Paint a Traxxas Lexan Body
How To Perform After-run Procedure
How To Prime the Engine
How To Rebuild the TRX 2.5, 2.5R and 3.3 Engine
How to rebuild the TRX Racing carburetor
How To Start and Tune the TRX 2.5/3.3 Racing Engine™
How To Tune the TRX 2.5, 2.5R and 3.3 for Best Performance
Installing axle drive pins
Keep stripping or melting spur gears
Keep stripping plastic out drive yokes
Legacy/Previous Nitro Model Listing
Model does not shift into 2nd
Model does not slow down (no brakes)
Model does not track straight
Model feels sluggish (poor acceleration) (Nitro)
Model glitches and stutters
Model goes backward when I apply forward power, or vice versa
Model goes right when I steer left
Model Has No Power to Electronics
Model loses control after 50 feet
Model only has slow or high speeds
Model runs in circles and/or does not respond to transmitter controls
Model shifts into high gear too early
Model shifts into high gear too late
Model will not roll forward
PDF DOWNLOADS for All Traxxas Models
ProGraphix painted bodies
Release a Stuck Engine (TDC)
Repairing Cut or Damaged Wiring
Repairs and Service
Replace the bent suspension pins with a new set
Replace the clutch shoe spring
Rod End and Hollow Ball Connector Maintenance
Run-time on a tank of fuel
Screws keep coming loose in my vehicle
Shocks leak oil even after they're rebuilt
Spur Gear Maintenance
Steering and throttle response feels sluggish
Steering binds
Steering control is erratic, but throttle and brake response is fine
Steering works, but there's no throttle
Suspension arms bind
The Fuel
Throttle and Brake Linkage Adjustment
Throttle works, but there's no steering
Tightening loose screws with thread lock glue
TQi Telemetry Instructions
Tranny makes grinding noises
Transmission has a hard time or does not engage into drive
Traxxas Engine Replacement Plan
Traxxas TQi Compatibility Guide
Traxxas Warranty Service
Troubleshooting - Connecting EZ-Start® Motor
Troubleshooting - Engine chokes or stalls under acceleration and at speed
Troubleshooting - Engine has poor performance and poor acceleration
Troubleshooting - Engine mounting screws keep loosening
Troubleshooting - Engine overheats
Troubleshooting - Engine stalls during normal driving or braking
Troubleshooting - Engine stalls when brakes are applied
Troubleshooting - Engine starts and then stalls
Troubleshooting - Engine Will Not Start
Troubleshooting - EZ-Start Battery
Troubleshooting - EZ-Start motor will not turn
Troubleshooting - Glow plug wire damaged
Troubleshooting - Replacing the EZ-Start Gears
Troubleshooting - Replacing the EZ-Start Motor
Tuned exhaust system leaks at the joints
What accessories do I need to buy in order to run a Traxxas nitro model?
SSP: $529.99
Tweet
