Resources
Forum
Parts List
Exploded Views
Manuals
Instructions
Air Filter
Bent shock shaft
Body rubs when cornering
Break-In Procedure for TRX Pro.15 Engine
Bushings in the steering bellcranks are worn
Carburetor Care
Clicking sound and wheels don't turn (Steering)
Cutting ventilation holes in the body
Drive Train Binding
Excessive steering slop
EZ-Start turns but engine does not rotate
Failed Servo
Fine tuning the low speed mixture setting (Pro .15)
Forward and Reverse Trim Adjustment (TQ 27 MHz)
Fuel Mixture Setting (TRX .15 Nitro Sport)
Glow plug connector loose (Pro .15)
Glow Plugs
High-Speed Mixture Setting: TRX Pro.15
How big is the fuel tank?
How can I convert my Nitro Sport to a Nitro Rustler?
How do I set the Gear Mesh on my Traxxas Model?
How To - Adjust the Slipper Clutch
How To - Adjust the Steering Trim
How To - Clean a gummed engine
How To - Clean and Maintain the Roller Clutch (One-Way Bearing)
How To - Clean and Re-oil the Air Filter
How To - Clear a Flooded Engine
How To - Glue Tires To Wheels
How To - Install u-joints
How To - Maintaining and Storing Your Traxxas Nitro Model
How To - Paint a Traxxas Lexan Body
How To - Perform After-run Procedure
How To - Prime the Engine
How To - Replace Clutch Shoes
Installing axle drive pins
Keep stripping or melting spur gears
Keep stripping plastic out drive yokes
Legacy/Previous Nitro Model Listing
Model does not slow down (no brakes)
Model does not track straight
Model feels sluggish (poor acceleration) (Nitro)
Model glitches and stutters
Model goes backward when I apply forward power, or vice versa
Model goes right when I steer left
Model Has No Power to Electronics
Model loses control after 50 feet
Model only has slow or high speeds
Model runs in circles and/or does not respond to transmitter controls
PDF DOWNLOADS for All Traxxas Models
Poor Radio Signal/interference (27MHz AM)
ProGraphix painted bodies
Readjust carburetor to factory break-in settings (Pro.15, TRX 2.5R/3.3)
Release a Stuck Engine (TDC)
Repairing Cut or Damaged Wiring
Repairs and Service
Replace the bent suspension pins with a new set
Replace the clutch in the Nitro Sport?
Replace the clutch shoe spring
Rod End and Hollow Ball Connector Maintenance
Run-time on a tank of fuel
Screws keep coming loose in my vehicle
Setting the idle speed on the Pro .15 Engine
Shocks leak oil even after they're rebuilt
Spur Gear Maintenance
Spur Gear/Clutch Bell Maintenance
Steering and throttle response feels sluggish
Steering binds
Steering control is erratic, but throttle and brake response is fine
Steering works, but there's no throttle
Suspension arms bind
The Fuel
Throttle and Brake Linkage Adjustment
Throttle works, but there's no steering
Tightening loose screws with thread lock glue
Tranny makes grinding noises
Transmission has a hard time or does not engage into drive
Traxxas Engine Replacement Plan
Traxxas Warranty Service
Troubleshooting - Connecting EZ-Start Motor
Troubleshooting - Engine chokes or stalls under acceleration and at speed
Troubleshooting - Engine has poor performance and poor acceleration
Troubleshooting - Engine mounting screws keep loosening
Troubleshooting - Engine overheats
Troubleshooting - Engine stalls during normal driving or braking
Troubleshooting - Engine stalls when brakes are applied
Troubleshooting - Engine starts and then stalls
Troubleshooting - Engine Will Not Start
Troubleshooting - EZ-Start Battery
Troubleshooting - EZ-Start motor will not turn
Troubleshooting - Glow plug wire damaged
Troubleshooting - Replacing the EZ-Start Gears
Troubleshooting - Replacing the EZ-Start Motor
TRX Pro.15 carburetor settings
TRX Pro.15 Engine Rebuild
Tuned exhaust system leaks at the joints
What accessories do I need to buy in order to run a Traxxas nitro model?
What are the differences between a Nitro Sport/SE and the Nitro Rustler 2.5?
Tweet
