The foundation of Spartan's extreme performance is its all-new hull. The clean, modern hull design is built up in layers for maximum rigidity where it matters most, the transom and ride pad. Lightweight yet incredibly strong, Spartan's ABS hull is designed to withstand the stress of high-voltage brushless horsepower, without the weight penalty of a fiberglass hull. The transom bulkhead also incorporates bosses for the trim tabs, turn fins, rudder support, and drive strut, eliminating the need for plywood doublers and additional hardware inside the hull. In the Spartan's bow, molded foam is form-fitted to the interior, adding security as it further stiffens the hull. Outside the hull, Spartan impresses with its durable, vivid, factory-applied graphics—a Traxxas trademark.
Power Cell LiPo Batteries
Designed from the start for high-voltage, high-capacity LiPo packs, Traxxas’ Spartan now includes a pair of genuine Traxxas Power Cell LiPo battey packs—the only LiPos certified to deliver the full performance potential of Traxxas’ most versitile all-terrain truck. Spartan includes two 5000mAh 3-cell Power Cell LiPo battery packs. Spartan arrives with Low Voltage Detection activated to assure maximum battery life and prevent over-discharging.
LiPo Balance Chargers
Charging care is just as important to LiPo life and performance, so a pair of 2-Cell / 3-Cell LiPo Balance chargers are also included. Just plug the battery’s balance plug into the charger and you’re on the way to another run—no programming or settings required. Every time a pack is charged, the cells are charged individually to precisely balance voltage for optimum performance, run time, and cycle life. Experience the ultimate in electric horsepower with the only models designed for LiPo power from the start, and genuine Power Cell LiPo technology on board.
Spartan's hatch is secured by a single body clip and removes in seconds for fast and easy access to the hull interior. No sealing tape is required, and a specially designed drip rail in the hull channels away any water that washes over the hatch.
You'll never drop a body clip into the pond with Spartan! A flexible rubber lanyard keeps the body clip secured to the hatch so it's always at the ready. It's just one of the many small details that makes a day at the pond with Spartan fun and easy.
Streamlined Water Outlet
Nothing was overlooked in the effort to optimize every detail of the Spartan—even the water outlet is unique! Instead of an unsightly piece of tubing, Spartan's water outlet is streamlined and integrated into the hull, maintaining its sleek look.
Spartan's bold graphics make it the most stunning boat on the pond, with a custom look even pro painters can't match. No painting or decaling is required; all the graphics are pre-applied to get Spartan out of the box and into the water with speed and style.
Integrated Battery Trays
Spartan's hull is further strengthened by its integrated battery trays, which securely hold a variety of battery configurations—from 7-cell Power Cell NiMH packs to 3S LiPos. The roomy trays allow the hull to be trimmed by positioning the packs fore and aft, and convenient hook and loop straps secure the batteries.
Removable Power Module
A signature feature of the Spartan is its unique Power Module. The VXL-6s speed control, waterproof receiver box, and powerful 2056 high-torque servo are all bolted securely to the tray. Detach the steering linkage and flex cable, then loosen just two screws to release the Spartan's electronics. All of the electronic components, including the motor and stuffing tube, lift out as a unit. No other boat makes it so easy to access the hull interior and electronics, and the molded parts fit into the hull precisely for perfect alignment without crude brackets or wooden stringers. The Power Module also contributes to the Spartan's stability by holding the electronic components low in the hull. Spartan's low center of gravity, combined with its wave-cutting deep-V hull, gives it high stability without compromising high performance.
Quick Release Flex Cable
Some boats rely on set-screws to pinch the flex shaft in place. Setscrews are prone to loosening and can damage the flex shaft—that's not the Traxxas way. Spartan features a clamping collet that holds the cable tightly and centers it perfectly with the motor's output shaft for smooth, efficient operation. When it's time for maintenance, the collet releases quickly with a twist of the included precision wrench. Once loosened, the prop and flex cable simply slide out. Reinstallation is just as fast, making it easy to keep your Spartan running in absolute peak form.
Spartan's surface-piercing prop is optimized to get the hull on plane quickly without cavitation and to run at maximum speed with the least current draw. Traxxas engineers spent many hours testing prop configurations to find the perfect balance of performance, efficiency, and durability. Molded composite construction makes the prop light and tough, and no balancing or sharpening is required.
High-Strength Aluminum Hardware
Extreme brushless horsepower demands rigid drive hardware and a flex-free transom for sharp and predictable handling. The rudder, rudder support and drive strut are extruded and machined from rugged 6000-series aluminum alloy for maximum strength, and then polished and anodized vivid blue for that unmistakable Traxxas look. When you lean the Spartan over into a water-carving turn, you can count on the rudder to dig in and hold your line. The rudder incorporates a pickup for the water-cooling system, and uses oilite bushings for smooth steering action. The drive strut also uses oilite bushings for corrosion-free performance, and features an oiling hole for easy maintenance.
Stainless-Steel Trim Tabs & Turn Fins
Spartan's dual trim tabs and turn fins are critical to its high-speed performance. The parts are precision die-cut and bent from stainless steel to resist corrosion as they provide aggressive cornering 'bite' and the proper hull attitude for water-boiling speed.
Stainlees Steel Hex Hardware
Spartan uses corrosion-resistant stainless-steel and nickel-plated hardware throughout for good looks, easy maintenance, and lasting performance. Convenient hex heads make Spartan a pleasure to maintain.
Extreme Velineon brushless horsepower delivers the muscle you want with the reliability you expect from Traxxas. The VXL-6s Marine electronic speed control is built for true 6S LiPo power.* On-board low voltage detection helps you maintain your batteries. The extra voltage and current maximizes the potential of the Velineon 540XL motor for extreme 50+mph speed. The rebuildable, sensorless Velineon 540XL motor is designed for high-rpm performance and reliability with ultra high-temperature sintered Neodymium magnets, a precision-balanced rotor, and efficient, high-speed ball bearings. Cooling water is routed through the innovative speed control case and then into a unique sealed motor jacket that allows cooling water to flow directly against the motor for maximum possible heat transfer. The Spartan keeps its cool, run after run, for trouble-free all-day fun.
- Innovative waterproof design
- integrated water cooling
- Three programmable drive profiles:
- Sport Mode – 100% FWD / 15% REV
- Race Mode - 100% FWD / No REV
- Training Mode – 50% FWD / 15% REV
- High-efficiency MOSFET transistors
- Built-in two-stage low-voltage detection for LiPo batteries
- Thermal overload protection
- Voltage overload protection
- Locked rotor protection
- Throtle Neutral Setting protection
- NiCad and NiMH battery packs: 6-18 cells (7.2 to 21.6 volts)
- LiPo battery packs: 2-6 cells (7.4 to 22.2 volts)
- 12-gauge Maxx Cable wire
- Traxxas High-Current Connectors
- Ultra high-temperature sintered Neodymium magnets
- Optimized for power and efficiency in marine applications
- Consistent, high-power output, run after run
- Low-maintenance design
- Efficient, high-speed ball bearings
- Precision-balanced rotor
- High-efficiency bullet connectors
- 5mm output shaft
- Brilliant blue-anodized finish
- Silicon steel laminations
- Unique high-flow silicone water cooling jacket
Traxxas High-Current Connectors
The VXL-6s electronic speed control comes equipped with Traxxas patented High-Current Connectors and Maxx® cable 12-gauge wire. Designed to handle high-current applications, Traxxas Connectors effortlessly funnel the dual batteries' total power to the electronics, keeping things running cool and at full capacity—even at the highest power levels, run after run. Click here for more info about the Traxxas High-Current Connector.
The World's Most Advanced Ready-To-Race® Radio System
Total Control. Traxxas models deserve the world's most advanced Ready-To-Race® radio system. The radio system after all is the sole connection between the driver and machine. It has to be precise, comfortable, powerful, and reliable. The all-new Traxxas® TQi™ radio system arrives with a full compliment of tuning features; long-range, high-output, 2.4GHz signal, and proven Traxxas reliability for rock-solid performance. It's so advanced; it doesn't even need an external antenna. However, the most important new feature may already be in your pocket. The TQi can be equipped with an optional Docking Base (#6510) that turns your iPhone® or iPod touch® into a powerful tuning tool for your Traxxas model. The full-color display combines with the Traxxas Link™ App to deliver an intuitive, high-definition, full-color graphical user interface that unlocks the mysteries of optimizing your radio system for ultimate vehicle control.
5-channel Micro Receiver with Fail-Safe Security
The TQi 2.4GHz micro receiver fits easily into any vehicle, and features dual channel-1 outputs for easy installation in vehicles with dual steering servos—no Y-harness necessary! The integrated LINK button makes it fast and easy to bind the receiver, and the two-color LED indicates power-on and bind status for fool-proof control and convenience. Traxxas Link Model Memory allows the receiver to recognize up to thirty TQi 2.4Ghz Traxxas Link enabled transmitters—just switch on and drive. In the event of signal loss due to an accidental switch-off or depleted batteries, the receiver will automatically return the throttle to neutral and hold the last commanded steering position. The Fail Safe programming is built-in and does not need to be set or activated. Three telemetry ports are incorporated in the 5-channel receiver to allow real-time data to be transmitted from your Traxxas model to the TQi transmitter.
Waterproof electronics are a must in the marine environment. Traxxas electronics are fully waterproof (not just water resistant). The speed control, servo, and receiver all feature rugged waterproofing protection for dependable operation you can count on. It's an innovation you'll find only in Traxxas vehicles.
High-Torque Waterproof Servo
Spartan demands a powerful steering servo for responsive performance, and Traxxas delivers with the 2056 high-torque servo. O-ring seals make the servo completely waterproof, and there's steering muscle to spare with 80 oz-in of torque at your command. That's twice the power of typical "standard" servos.
Sealed Watertight Receiver Box
Traxxas' innovative, ground-breaking waterproof receiver box routes the antenna and servo wires neatly through a special watertight seal (patent pending). To protect the receiver, a custom shaped blue O-ring seals the receiver box. Thanks to the unique design, the receiver can be removed for service and even aftermarket receivers can be used, without losing the sealing properties of the box.
Unmatched Customer Support and Parts Availability
Spartan comes fully-assembled and Ready-To-Race® with the TQi™ 2.4GHz radio system installed and adjusted, waterproof electronics with VXL-6s Electronic Speed Control, Power Cell batteries, and detailed instructions. Traxxas backs the Spartan and all of our products with top-notch support that is second to none. A staff of skilled representatives is on-hand to answer your questions via phone, website, or e-mail (support@Traxxas.com). Unmatched parts support allows Spartan to be serviced with parts and support from thousands of hobby dealers worldwide. Your investment is also protected by the Traxxas Lifetime Electronics Warranty. Traxxas goes the extra mile to ensure that your R/C experience is easy and fun (and fast!).
MODEL 5707L: Fully assembled, Ready-To-Race®, TQi™ 2.4GHz radio system, Velineon® 540XL Brushless Motor, VXL-6s Marine ESC, two Power Cell 11.1-volt LiPo battery packs, two LiPo balance chargers, and factory-applied graphics.