Innovative New Chassis
The innovation designed into the Stampede 4X4 begins with an all-new chassis. Extreme Brushless Power and 4WD requires a chassis that won't flex under load for arrow-straight, hard-charging acceleration. The new chassis fully integrates the electronics and battery compartment for an efficient and compact layout, and maintains the high center ground clearance that gives Stampede 4X4 its monster stance and high-riding look. The extra clearance dramatically increases the offroad versatility that allows you to tackle rough terrain and large obstacles. The Stampede 4X4 feels planted and secure at speed, even on pavement and in other high-grip conditions. Stampede 4X4 is 100% monster truck, but it handles like a racing machine! Underneath, the chassis is ultra-smooth to reduce drag and prevent snags driving through brush.
Old designs made servicing of 4-wheel drive vehicles cumbersome and time-consuming. Traxxas has a better way. Modular design allows the entire front section to be removed with just 5 screws, and the rear assembly with just 4 screws. In less than a minute using a power screwdriver, you have full access for easy service and adjustment.
Power Cell LiPo Battery
Designed from the start for high-voltage, high-capacity LiPo packs, Traxxas’ Stampede 4X4 now includes a genuine Traxxas Power Cell LiPo battey—the only LiPos certified to deliver the full performance potential of Traxxas’ VXL brushless models. The Stampede 4X4 includes a 4000mAh 7.4-volt Power Cell pack. Stampede 4X4 arrives with Low Voltage Detection activated to assure maximum battery life and prevent over-discharging.
LiPo Balance Charger
Charging care is just as important to LiPo life and performance, so a 2-Cell / 3-Cell LiPo Balance charger is also included. Just plug the battery’s balance plug into the charger and you’re on the way to another run—no programming or settings required. Every time the pack is charged, the cells are charged individually to precisely balance voltage for optimum performance, run time, and cycle life. Experience the ultimate in electric horsepower with the only models designed for LiPo power from the start, and genuine Power Cell LiPo technology on board.
Integrated Shock Guards
Stampede is legendary for knock-around durability, and Stampede 4X4 follows suit with its Traxxas-tough construction. New Shock Guards attach to the front and rear suspension arms and shield the lower ends of the shocks, preventing spring perches from being knocked loose and warding off impact damage while giving Stampede 4X4 a high-tech look.
The World's Most Advanced Ready-To-Race® Radio System
Total Control. Traxxas models deserve the world's most advanced Ready-To-Race® radio system. The radio system after all is the sole connection between the driver and machine. It has to be precise, comfortable, powerful, and reliable. The all-new Traxxas® TQi™ radio system arrives with a full compliment of tuning features; long-range, high-output, 2.4GHz signal, and proven Traxxas reliability for rock-solid performance. It's so advanced; it doesn't even need an external antenna. However, the most important new feature may already be in your pocket. The TQi can be equipped with an optional Docking Base (#6510) that turns your iPhone® or iPod touch® into a powerful tuning tool for your Traxxas model. The full-color display combines with the Traxxas Link™ App to deliver an intuitive, high-definition, full-color graphical user interface that unlocks the mysteries of optimizing your radio system for ultimate vehicle control.
5-channel Micro Receiver with Fail-Safe Security
The TQi 2.4GHz micro receiver fits easily into any vehicle, and features dual channel-1 outputs for easy installation in vehicles with dual steering servos—no Y-harness necessary! The integrated LINK button makes it fast and easy to bind the receiver, and the two-color LED indicates power-on and bind status for fool-proof control and convenience. Traxxas Link Model Memory allows the receiver to recognize up to thirty TQi 2.4Ghz Traxxas Link enabled transmitters—just switch on and drive. In the event of signal loss due to an accidental switch-off or depleted batteries, the receiver will automatically return the throttle to neutral and hold the last commanded steering position. The Fail Safe programming is built-in and does not need to be set or activated. Three telemetry ports are incorporated in the 5-channel receiver to allow real-time data to be transmitted from your Traxxas model to the TQi transmitter.
Black-Chrome All-Star Wheels
The Stampede 4X4’s 2.8" All-Star™ black-chrome wheels feature a horizontal bead configuration that holds the tire to the rim even under extreme rpm. Performance-designed foam inserts are standard, and the tires come pre-glued from the factory to get you rolling right out of the box.
Talon™ 2.8" Multi-Terrain Tires
The advanced Talon tread pattern is the same proven design used to provide excellent traction on our highest-performing E-Revo Brushless Edition! The soft-compound rubber hooks up for maximum acceleration and great grip on a wide variety of surfaces, including dirt, grass, pavement, and rocks.
Adjustable Wheelie Bar
Stampede 4X4 comes equipped with the unique Traxxas adjustable wheelie bar. The patented wheelie bar features four position adjustments for wheelie control or wheelies on command. No tools are required to set the ‘bar for sky-high wheelstands or road-hugging launches—just snap the wheelie bar into the position you prefer.
Sealed Watertight Receiver Box
Stampede 4X4’s receiver is fully enclosed for protection from the elements. The antenna and servo wires route neatly through a special watertight seal, and a custom blue O-ring seals the receiver box to protect the receiver from water. The receiver can be removed for service and aftermarket receivers can be installed without losing the sealing properties of the box. Patent pending.
- Innovative waterproof design
- Three Programmable
- Sport Mode - Forward / Brake / Reverse
- Race Mode - Forward / Brake
- Training Mode™ - 50% Forward / Brake / 50% Reverse (patent pending)
- Integrated on/off switch
- Traxxas EZ-Set® one-button setup
- Large heat sink
- High-efficiency MOSFET transistors
- Auto-detects brushed, brushless, and sensored brushless motors
- Built-in two-stage low-voltage detection for LiPo batteries.
- NiCad and NiMH battery packs: 4-9 cells (4.8 to 10.8 volts)
- LiPo battery packs: 2-3 cells (7.4 to 11.1 volts)
- For more info about the Velineon VXL-3s ESC click here.
- Ultra high-temperature sintered Neodymium magnets
- Optimized for power and efficiency in 1/10th scale vehicles
- Consistent, high-power output, run after run
- Low-maintenance, unique Traxxas design
- Efficient, high-speed ball bearings
- Precision-balanced rotor
- Accessible solder tabs
- Protective end cap
- 10-Turn, 3500kV
- Hex hardware
- Brilliant blue-anodizing finish
- Silicon steel laminations
- Delivers more power than comparable brushed motors
- For more info about the Velineon 3500 Brushless motor click here.
Traxxas High-Current Connectors
The Velineon Brushless Power System comes equipped with the Traxxas High-Current Connector. Designed to handle high-current applications, the Traxxas Connector effortlessly funnels the battery's total power to the electronics, keeping things running cool and at full capacity. For more info about the Traxxas High-Current Connector click here.
Maxx Cable 12-Gauge Wire
This super-flexible, high-current, low-resistance 12-gauge, wire acts like a series of giant pipes, flowing energy in and out of the electronic speed control. The Traxxas Connector combined with Maxx cable is a better engineered solution for extracting all the power your battery has to give.
Oil-Filled Ultra Shocks
High-speed off-road action requires rugged, responsive shocks that can take abuse. Traxxas Ultra Shocks are proven tough as stock equipment for Traxxas Maxx trucks. The high-volume body yields large oil capacity, and a silicone bladder separates oil from air within the shock for consistent damping action, even during all-day off-road sessions. Dual X-ring seals give super-smooth performance without weeping or leaking, and Ultra Shocks are fully tunable with a wide range of oils, springs, and pistons.
Digital High-Torque Waterproof Steering Servo
A monster truck needs a powerful steering servo for responsive performance. A Traxxas digital high-torque, ball bearing steering servo (#2075) comes standard for precision control, quick response, and unmatched torque—all in a waterproof case. With 125 oz-in torque and a 0.16-second transit speed, it gives Stampede 4X4 ample steering power for responsive, precise control.
Extruded Aluminum Driveshaft
Stampede 4X4's center driveshaft is formed from extruded aluminum. There are no dogbones to wear, no drive cups to wobble. The extrusion process allows the shaft to be hollow and lightweight with internal splines that fit directly and securely onto the input shafts of the front and rear drive assemblies. The shaft runs perfectly straight and true and offers superior durability. Traxxas engineers highlighted this important innovation with vivid blue anodizing and a laser-etched Traxxas logo, then protected it with a clear cover that shows off the high-tech look while keeping dirt and debris away from the shaft.
Single-Screw Motor Access
Inspired by the innovative E-Revo, Stampede 4X4 features a unique mount that holds the Velineon 3500 motor securely yet releases instantly with just one screw. Gear-mesh adjustments are fast and easy and the motor can be removed in just seconds.
Race-proven in the 8-time National Champion Revo, Stampede 4X4's differentials represent the state of the art in power handling and efficiency. Precision silicone gaskets and X-ring seals allow the diffs to be tuned for specific running conditions by varying the viscosity of the fluid inside them. Differential access for tuning is quick and easy. Just remove the front or rear cover and the entire differential slides right out. The Stampede 4X4 let's you focus on having fun driving at the racetrack instead of being chained to the workbench scrambling through complex assemblies.
New Heavy-Duty Driveshafts
Stampede 4X4's telescoping, universal-joint driveshafts may look familiar but they have evolved for increased strength and articulation. Traxxas U-joint driveshafts allow for maximum suspension movement resulting in longer travel and tighter turning. Extra material and design tweaks greatly increase torque handling. The shafts can even be used to upgrade the 2WD Stampede and other Traxxas models!
Revo®-Spec Torque-Control™ Slipper Clutch
Another Traxxas exclusive, Stampede 4X4's patented slipper clutch design uses special semi-metallic friction material and finned aluminum alloy pressure plates to dissipate heat and provide consistent traction control. The slipper is easily adjusted without disassembly or removal, and the unique 3-pad design is proven rugged in Traxxas' most powerful electric and nitro vehicles. It's the perfect compliment to Velineon brushless power and 4WD, offering the ultimate in traction control.
Heavy-Duty 32-Pitch Gears
Extreme brushless horsepower is never an afterthought at Traxxas. The Stampede 4X4 driveline is built to handle power for today and accommodate future power upgrades down the road. The spur gear features rugged 0.8 module/32-pitch teeth for total reliability no matter how much power you pour on.
Stampede 4X4 has huge amounts of seemingly bottomless, ultra-plush suspension travel for suspension action that swallows up jumps and delivers incredible rough-track control. The fully-optimized front axle carrier is a result of computer modeling that allowed engineers to design for maximum articulation without binding or interference. Tight steering response is always there, even at the extreme ranges of the suspension travel. Double-shear tie rods and camber links simply can't pop off, so you always stay in control. Robust construction wards off crash damage, and oversized 10x15mm inboard bearings and 5x11mm outboard bearings are incredibly durable and smooth.
Optimum-Geometry Steering with Integrated Servo Saver
No part of Stampede 4X4 was overlooked in the quest for durability, precision, and performance. The new dual-bellcrank design pivots on rubber-sealed ball bearings for smooth action in the harshest conditions, and an integrated cam-type servo saver protects the servo gears from crash impacts without sacrificing steering precision.
Heavy-Duty 4mm Turnbuckles
Stampede 4X4’s turnbuckles have broad flats that make it easy to set toe-in and camber. The tough steel construction is ultra durable and the captured rod ends won't pop apart during rigorous off-road pounding.
Stampede 4X4’s fully trimmed and painted ProGraphix body is available in red, blue, black, and silver. Decals are also applied to save you time and get you driving just minutes out of the box. Traxxas’ ProGraphix bodies are the hottest looking bodies around and are only available on Traxxas Ready-To-Race® models.
Pro-quality, high-grade, metric hex-drive hardware is used throughout for extra strength, and easy maintenance and repair. The black-oxide rust-resistant finish provides a high tech-look and feel.
Rubber-Sealed Ball Bearings
Precision 5x11mm rubber-sealed bearings offer the ultimate in super low-friction performance and maximum protection in dirty environments. They are used in all exposed locations on the truck and are virtually maintenance free.
Unmatched Customer Support & Parts Availability
Unparalleled Traxxas support comes standard with every Traxxas model. Traxxas offers the most extensive product support base in the industry and provides unrivaled parts availability. Rustler parts and service are available from a network of nearly 2000 hobby dealers worldwide. Nobody works harder than Traxxas to be accessible to you. We have friendly toll-free phone support that's available from 8:30am to 9pm central time weekdays. Just call 1-888-TRAXXAS. We also offer e-mail support anytime at email@example.com. Traxxas models are about experiencing total performance and satisfaction, not just in the products, but also with the company that stands behind them.