ALUMINUM STEERING BELLCRANKS FOR RUSTLER & BANDIT: Enhance steering precision, strength, and looks with Genuine Traxxas™ machined aluminum steering bellcrank assemblies. Engineered exclusively for Rustler and Bandit, the ball bearing equipped bellcranks offer silky smooth operation for reduced friction and long life. The pre-assembled units are easy to install, include detailed installation instructions, and are available in fire-red or a brilliant-blue anodized finish with laser-etched Traxxas logo.

3743X Red-Anodized Aluminum Steering Bellcranks for Rustler & Bandit/ 5x8mm ball bearings (4) hardware (assembled)
Suggested retail price $34.00

3743A Blue-Anodized Aluminum Steering Bellcranks for Rustler & Bandit/ 5x8mm ball bearings (4) hardware (assembled)
Suggested retail price $34.00

TRAXXAS CRYSTAL ACCESSORY PACKAGE: Traxxas now offers a package containing crystal holders for transmitters and receivers. The new crystal accessory package from Traxxas includes two receiver crystal holders and a transmitter crystal housing. For easy frequency identification, color coded labels for each of the six 27MHz AM frequencies are included for labeling the transmitter crystal housing.

Part #2030 Crystal holders, transmitter & receiver/ decal sheet
Suggested retail price $2.00

TRAXXAS HIGH-CURRENT CONNECTOR: The patent-pending Traxxas High-Current Connector defines the new standard for efficiency, ease of use, and high-current handling for real-world use.

Large, textured surfaces on the plug bodies are easy for fingers to grip and the clever reverse-polarity protection makes Traxxas Connectors virtually impossible to plug in backwards. Shrouded wire connections eliminate the extra steps to install heat shrink tubing. Beefy, gold-plated copper terminals with large, spring-loaded contact areas ensure a perfect connection every time. Even after thousands of uses, Traxxas Connectors maintain their precision feel and incredibly low resistance.

Get full details on the product page >>

SPECIAL HOW-TO VIDEO:
Learn how to assemble a Traxxas connector!

Part #3060 Traxxas Connector (male/female) (1)
Suggested retail price $4.25

Part #3070 Traxxas Connector (male) (2)
Suggested retail price $3.75

Part # 3080 Traxxas Connector (female) (2)
Suggested retail price $4.75

TRAXXAS CONNECTOR ADAPTER: Designed to allow chargers with standard Molex connectors to charge batteries equipped with Traxxas High-Current Connectors (#3061). Or, for charging from a charger outfitted with the Traxxas High-Current Connector to an EZ-Start® 7.2V battery pack equipped with a Molex connector (#3062) . Use only in low current applications, not intended for use in vehicles.

Part #3061 Traxxas Connector Adapter, Male/Standard Molex Female (1)
Suggested retail price $5.00

Part # 3062 Adapter, Traxxas Connector Female/Standard Molex Male (1)
Suggested retail price $5.50

DIGITAL HIGH-TORQUE STEERING SERVO: The Traxxas digital high-torque, ball bearing servo features precision control, quick response, and incredible torque for increased steering response and control. It has over 50% more torque than the 2055 servo and it's 25% faster! That's 125 oz-in torque, 0.16-second speed!

Part #2070 Digital high-torque servo (ball bearing)
Suggested retail price $40.00

ALUMINUM STUB AXLE CARRIERS: Traxxas aluminum stub axle carriers add both strength and beauty. In addition to the durability and precision of the machined billet 6061-T6 aluminum, larger 5x11mm ball bearings are included for smooth performance, reduced friction, and long life. Rubber seals on the bearings make them virtually maintenance free. Easy, bolt-on good looks in fire-red or brilliant-blue anodizing.

3652X Stub Axle Carriers (2), 6061-T6 Red-Anodized Aluminum, 5x11mm ball bearings (4)
Suggested retail price $35.00

3652A Stub Axle Carriers (2), 6061-T6 Blue-Anodized Aluminum, 5x11mm ball bearings (4)
Suggested retail price $35.00

ALUMINUM STEERING BLOCKS: Traxxas aluminum steering blocks improve appearance, ruggedness, and control. In addition to the strength and precision of the machined billet 6061-T6 aluminum steering blocks, larger 5x11mm ball bearings are included for smooth performance, reduced friction, and long life. Rubber seals on the bearings make them virtually maintenance free. Easy, bolt-on good looks in fire-red or brilliant-blue anodizing.

3636X Steering Blocks (2), 6061-T6 Red-Anodized Aluminum, 5x11mm ball bearings (4)
Suggested retail price $35.00

3636A Steering blocks (2), 6061-T6 Blue-Anodized Aluminum, 5x11mm ball bearings (4)
Suggested retail price $35.00

WHEELIE BAR FOR BANDIT: Traxxas has engineered a bolt-on wheelie bar mount for Stampede, Rustler, and Bandit that uses the unique patent-pending Traxxas adjustable wheelie bar. The wheelie bar features four position adjustment, plus it quickly and easily installs onto the rear of any electric Rustler, Stampede, and Bandit. The wheelie bar mount is constructed of durable composite nylon and it offers an extra level of protection for the motor and transmission case.

The mount is available separately as part #3677, so existing Maxx wheelie bar components (part #4974 and #4976) can be added to complete the assembly. The complete wheelie bar assembly for Rustler, Stampede, and Bandit is available as part #3678. Existing wheelie bar accessories such as the aluminum wheelie bar wheels with rubber tires (part #5186) or the separate rubber tires (part #5185) are also compatible for custom looks and increased performance.

3678 Wheelie bar assembly for Stampede/Rustler/Bandit
Suggested retail price $15.00

3677 Wheelie bar mount for Stampede/Rustler/Bandit (accepts Maxx wheelie bar components, #4974 and #4976)
Suggested retail price $4.00

Part # 4976 Wheels (4)/ Axles (2),
for wheelie bar
Suggested retail price $4.00

MACHINED ALUMINUM BALL BEARING WHEELS WITH RUBBER TIRES: Traxxas now offers an impressive set of red and blue-anodized machined aluminum wheelie bar wheels with rubber tires. The precision 6061-T6 aluminum wheels feature a stunning anodized finish and they ride on rubber-sealed 5x8mm ball bearings. For controllable and seemingly never-ending wheelies, Traxxas developed a durable, soft compound rubber tire that reduces side-to-side movement for stable, consistent wheelies. The rubber tires are available separately and they also install on the stock nylon wheels.

Part #5186A Rubber Tires Mounted on Blue-Anodized Wheelie Bar Wheels (2)/ 5x8mm Ball Bearings (4)/ Axles (2)
Suggested retail price $19.95

Part #5186 Rubber Tires Mounted on Red-Anodized Wheelie Bar Wheels (2)/ 5x8mm Ball Bearings (4)/ Axles (2)
Suggested retail price $19.95

Part #5185 Rubber Tires for Traxxas Wheelie Bar Wheels (2)
Suggested retail price $7.00

TRACER™ 2.2" WHEELS: These 2.2" wheels for Bandit fit Traxxas and other standard 2.2" buggy tires. Tracer 2.2" wheels are available in a shiny mirror-chrome or sinister black-chrome.

2473 Tracer 2.2" Mirror-Chrome Wheels (2) (Bandit Front)
Suggested retail price $7.50

2472 Tracer 2.2" Mirror-Chrome Wheels (2) (Bandit Rear)
Suggested retail price $8.00

2473A Tracer 2.2" Black-Chrome Wheels (2) (Bandit Front)
Suggested retail price $8.50

2472A Tracer 2.2" Black-Chrome Wheels (2) (Bandit Rear)
Suggested retail price $9.00

ANACONDA™ TIRES WITH TRACER™ 2.2" BLACK-CHROME WHEELS: Anaconda 2.2" performance street tires feature a unique rubber compound which provides incredible traction and long tread life. They come pre-glued to Tracer 2.2" Black Chrome wheels.

2479A Tires & wheels, assembled (Tracer 2.2" Black-Chrome Wheels, Anaconda 2.2" tires with foam inserts) (2) (Bandit front)
Suggested retail price $24.00

2478A Tires & wheels, assembled (Tracer 2.2" Black-Chrome Wheels, Anaconda 2.2" tires with foam inserts) (2) (Bandit rear)
Suggested retail price $27.00

ANACONDA™ TIRES WITH TRACER™ 2.2" MIRROR-CHROME WHEELS: High-grip Anaconda 2.2" performance street tires provide incredible tread life and traction and come pre-glued to popular Tracer 2.2" Mirror-Chrome wheels.

2479R Tires & wheels, assembled (Tracer 2.2" Mirror-Chrome Wheels, Anaconda 2.2" tires with foam inserts) (2) (Bandit front)
Suggested retail price $23.00

2478R Tires & wheels, assembled (Tracer 2.2" Mirror-Chrome Wheels, Anaconda 2.2" tires with foam inserts) (2) (Bandit rear)
Suggested retail price $26.00

ANACONDA 2.2" TIRES: Anaconda 2.2" performance street tires provide exceptional wear and sticky traction for high-speed asphalt action. Fits Traxxas and other standard 2.2" buggy wheels.

2478 Tires, Anaconda 2.2" (rear) (2)/ foam inserts (Bandit) (soft compound)
Suggested retail price $16.00

2479 Tires, Anaconda 2.2" (wide, front) (2)/foam inserts (Bandit) (soft compound)
Suggested retail price $14.00

PROGRAPHIX® CUSTOM BODY: From mild to wild, choose your own color and
personalize your body. The detailed graphics are fully painted, but the rest of the body is clear, so you can choose your own main body color. Simply grab a can of paint and spray the final color. It's easy for anyone to get instant, professional results. The bodies are completely trimmed and include the body post holes for easy installation on the chassis.

Part #2411X Bandit ProGraphix® Replacement Body
Suggested retail price $34.99

Part #2411 Bandit Body (clear, requires painting)
Suggested retail price $16.00

BIG BORE™ ALUMINUM SHOCKS: Traxxas Big Bore shocks provide ultimate dampening control. They're hard-anodized, Teflon®-coated aluminum and have large cylinders for greater oil capacity. Adjustments are a snap with clip-on spring pre-load spacers and installation time is reduced because the shocks are sold pre-assembled.

Part #2660 Aluminum Big Bore Shocks (Long, front (2))
Suggested retail price $30.00

Part #2662 Aluminum Big Bore Shocks (XX-Long rear (2))
Suggested retail price $30.00

PRO-SERIES ALUMINUM SHOCKS: These shocks are hard-anodized and Teflon®-coated just like the Big-Bore shocks, but they have a slightly smaller cylinder diameter. A great alternative to the Traxxas Big Bore aluminum shocks because they're more affordable.

Part #4760 Aluminum Shocks (long, front (2))
Suggested retail price $25.00

Part #4761 Aluminum Shocks (X-long, rear (2))
Suggested retail price $25.00

TITANIUM NITRIDE (TIN) SHOCK SHAFTS: These hardened, ground steel shafts have a super tough titanium nitride coating with a micro-polished finish that reduces stiction for smoother performance and resists scratching for much longer shaft life. The special hardened ground steel is extra strong to prevent bending.

Part #1664T Titanium Nitride Shock Shafts (long pair)
Suggested retail price $10.00

Part #2765T Titanium Nitride Shock Shafts (X-long pair)
Suggested retail price $10.00

Part #2656T Titanium Nitride Shock Shafts (XX-long pair)
Suggested retail price $10.00

Part #4261T Titanium Nitride Shock Shafts (29mm) Suggested retail price $10.00

Part #4262T Titanium Nitride Shock Shafts (32mm)
Suggested retail price $10.00

4mm Blue-Anodized Flange Lock Nuts
Lightweight and great looking, these blue-anodized-aluminum flange lock nuts are the perfect finishing touch for your serious road racer.

Part #1747X 4mm Blue-Anodized Flanged Lock Nuts (4)
Suggested retail price $5.00

Shock Rebuild Kit
The Traxxas shock rebuild kit includes everything that is needed to rebuild two shocks. The package includes silicone O-rings, Rubber diaphragms, C-clips and spacers.

Part #2362 Shock Rebuilt Kit Big Bore/Ultra Shocks
Suggested retail price $2.50

ALUMINUM SHOCK CAPS: Replace your stock Ultra Shock™ caps with the increased durability and superior sealing of our trick aluminum shock caps.

Part #2667 Aluminum Shock Caps (2)
Suggested retail price $7.00

RUBBER-SEALED BALL BEARINGS
Rubber-sealed ball bearings provide smooth, long-lasting and precise driving. Especially in dirt environments, rubber-sealed ball bearings provide the ultimate protection.

Part #5114 Ball bearings, blue rubber-sealed (5x8x2.5mm) (2)
Suggested retail price $4.00

Ball Bearings
Ball bearings deliver more speed and increase the life of moving parts by reducing friction. Bearings also last longer and require less maintenance than the stock oilite metal and plastic bushings.

Part #4710 Ball Bearings (5x11x4mm) (12) Suggested retail price $24.00

Part #2728 Ball Bearings (5x8x2.5mm) (2) (two packages required for the steering bellcranks)
Suggested retail price $6.00

Racing Sponsors Decal Sheet
Dress up your model's body with the Traxxas Racing Sponsor Decal Sheet. The decal sheet includes over 25 different full-scale sponsors including, NOS, K&N, Mechanix Wear, Holley, and Hooker headers. The decal sheet also includes various Traxxas logos including the popular TRAXXAS.COM decals. All the logotypes are faithfully produced and are fully licensed. 9" x 41/2"

Part #2514 Racing Sponsors Decal Sheet Suggested retail price $3.00

High Torque Servo
The Traxxas 2055 high-torque servo has 80 in/oz of torque to eliminate "mushy" steering response. Install it for more aggressive steering.

Part #2055 High Torque Servo
Suggested retail price $28.00

Metal Turnbuckles
Replace the non-adjustable camber links on your Stampede with these versatile metal turnbuckles that allow trackside camber adjustment. (Requires #2742 rod ends/ball connectors)

Part #1937 Turnbuckles (54mm) (2) (F) Suggested retail price $2.00

Part #2336 Turnbuckles (78mm) (2) (R) Suggested retail price $2.00

Part #2742 Rod Ends (long) (6)/ Ball Connectors (6)
Suggested retail price $4.00

Pro Ball Differential
Designed for all out competition, this Pro Ball Diff features dual ball bearings, metal thrust bearing ring and carbide differential balls for the smoothest operation possible. Our patented mechanism allows instant trackside adjustment in the Stampede without disassembly.

Part #2520 Pro Ball Differential
Suggested retail price $60.00

Suspension Tie Bar
Strengthens the front bulkhead and suspension arms. Requires #2640 suspension pins to complete installation.

Part #2532 Fiberglass Tie Bar
Suggested retail price $4.00

Part #2532X Graphite Tie bar
Suggested retail price $6.00

Suspension Pins, 3x44mm w/ E-clips
Replace the stock screw pins with these heavy duty steel suspension pins that are stronger, fit more precisely and pivot with less friction. These are required hardware for installing the #2532 or 2532X tie bar.

Part #2640 3x44mm Suspension Pins
(Steel, Chrome Finish)
Suggested retail price $2.50

Soft Red Rear Springs
The Traxxas red rear springs are specially designed for the StampedeÕs XX-long rear Ultra Shocks and feature a softer 2.5 rate. Perfect for softening up the rear end of the truck for increased rear traction.

Part #4957 Soft Red Rear Springs
Suggested retail price $2.50

Pinion Gears
Boost acceleration, out-of-the-corner punch and run time by installing this smaller 18-tooth pinion gear with the stock 78-tooth spur gear.

Part #1918 18-Tooth Pinion Gear (Steel) Suggested retail price $3.00

Part #2416 16-Tooth Pinion Gear
Suggested retail price $3.50

Part #4725 25-Tooth Pinion Gear (Stock) Suggested retail price $3.00

Part #4728 28-Tooth Pinion Gear
Suggested retail price $3.00

Aluminum Shocks
These shocks are hard-anodized and Teflon®-coated just like the Big Bore shocks, but they have a slightly smaller cylinder diameter. A great alternative to the Traxxas Big Bore aluminum shocks because they're more affordable.

Part #4760 Aluminum Shocks
(long, front (2))
Suggested retail price $25.00

Part #4761 Aluminum Shocks
(X-long, rear (2))
Suggested retail price $25.00

Spur Gears
Traxxas offers a broad selection of 48-pitch spur gears for performance fine-tuning.

Part #4678 Spur Gear (78-tooth)
Suggested retail price $3.00

Part #4681 Spur Gear (81-tooth)
Suggested retail price $3.00

Part #4684 Spur Gear (84-tooth) (Stock) Suggested retail price $3.00

Part #4687 Spur Gear (87-tooth)
Suggested retail price $3.00

Big-Bore Shocks
Traxxas Big-Bore shocks provide ultimate dampening control. They're hard-anodized, Teflon-coated and have large cylinders for greater oil capacity. Adjustments are a snap with clip-on spring pre-load spacers and installation time is reduced because the shocks are sold pre-assembled.

Part #2660 Aluminum Big Bore Shocks (Long, front (2))
Suggested retail price $30.00

Part #2662 Aluminum Big Bore Shocks (XX-Long rear (2))
Suggested retail price $30.00

Cap Head Motor Screws
You can replace the washerhead machine screws that secure the motor to the motor plate with these 3x8mm cap head machine screws for more secure motor mounting. The set includes 6 cap head screws, 6 split washers and a 2.5mm hex wrench.

Part #1552 Cap Head Screws
Suggested retail price $3.00

XL-10™ ELECTRONIC SPEED CONTROL (ESC) POWERFUL 10-TURN MOTOR LIMIT!
Traxxas’ all-new XL-10™ 7.2-volt electronic speed control is the muscle car of reversing speed controls. It’s built from the ground up to pack a serious punch and flows rivers of hardcore power. The XL-10 harnesses that current with smooth, precise full-proportional control of your forward/reverse speed and the powerful brakes. It features three easy-to-program drive profiles and EZ-Set™ push-button setup. Efficient high-frequency operation, MOSFET transistors, and thermal shutdown protection allow a generous 10-turn motor limit. The same low-loss design that puts down the power also provides longer run times. The sturdy XL-10 comes with the peace of mind of the Traxxas Lifetime Electronics Warranty and unmatched Traxxas customer support.
For more information about the XL-10, click here.

3016 XL-10 FWD/REV/BRK programmable electronic speed control
Suggested retail price $99.00

3625 Mounting plate, speed control (XL-10) (fits into Bandit, Rustler, and Stampede)
Suggested retail price $2.75

XL-5™ ELECTRONIC SPEED CONTROL (ESC)
The Traxxas XL-5 Electronic Speed Control provides smooth and consistent throttle control for the enthusiast who wants to extract the most from their mild modified and stock motors. The XL-5 features EZ-Set™ push-button setup for easy operation, four throttle profiles, 4-8 cell compatibility, and thermal shutdown production. High frequency operation combined with ultra low resistance make the XL-5 an efficient and ultra-smooth fully proportional speed control. The XL-5 is backed by the Traxxas Lifetime Electronics Warranty.

Patent Pending Training Mode™ an exclusive feature that places the XL-5 ahead of the pack is the patent pending Training Mode. This feature reduces the overall power output of the XL-5 by 50% making it easier for new drivers to control their model. When they’re ready, simply change profiles to unleash full-throttle action. Only Traxxas has it! For more information about the XL-5, click here.

Part #3016 XL-5 FWD/REV/BRK programmable electronic speed control
Suggested retail price $75.00

Part # 3625 Mounting plate, speed control (XL-5) (fits into Bandit, Rustler, Stampede and 4-Tec)
Suggested retail price $2.75

XL-1™ ELECTRONIC FWD/REV SPEED CONTROL:
The XL-1 electronic speed control puts the power of full, digital proportional forward/reverse throttle control at your fingertips. The XL-1 electronic speed control increases run time, and a special circuit prevents loss of control when the battery is discharged. The XL-1 is backed by a lifetime service guarantee.

Part #3006- XL-1 Electronic speed control
Suggested retail price $60.00