Results 1 to 5 of 5

Hybrid View

  1. #1
    RC Racer
    Join Date
    Jan 2013
    Posts
    121

    Going to the beach!

    Well like the title says I am going to the beach and would like to know what parts would be good to have on hand while bashing at the beach.

  2. #2
    RC Enthusiast
    Join Date
    Feb 2014
    Location
    Houston Tx
    Posts
    24
    Parts? Your going to need to clean those bearings. Sand gives so I wouldn't expect you to break anything. But it gets every where and can trash bearings if you don't clean them

  3. #3
    RC Qualifier
    Join Date
    Feb 2010
    Location
    Va
    Posts
    476
    Paddles!!!!!!!!!!!!!!!!
    Twin Brushless Latrax Teton, .21TM Jato

  4. #4
    RC Racer
    Join Date
    Oct 2013
    Location
    Finksburg MD
    Posts
    144
    I have been beach bashing for 3 years and form my first hand experience I have learned to use sand paddle tires and another 8 shocks filled with 10wt oil just for the beach.hope this helps and be careful,there are a lot of people on the beach.

  5. #5
    RC Competitor
    Join Date
    Jan 2014
    Posts
    80
    I taped where sand could be kicked up by paddle tires (read driveshafts and rear center driveshaft), and DO NOT use locked diffs and the front/rear and DO NOT use a center diff. Make sure you use a wheelie bar. Happy sand flinging😜

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •