Results 1 to 7 of 7
  1. #1
    RC Enthusiast
    Join Date
    Oct 2013
    Location
    Grenada, MS.
    Posts
    20

    Exclamation Turnbucle wrench ???

    I am trying to find out what the so called "turnbuckle wrench" that came with my Slash actually fits. I have yet to find anything that it will fit much less any of my turnbuckles. Does anybody have a clue?

  2. #2
    Marshal Double G's Avatar
    Join Date
    May 2008
    Location
    Putting the water on the hot stuff
    Posts
    9,696
    It is a 5mm wrench that you use to turn the turnbuckle to adjust the toe in and out or on the links to adjust the camber. Looking at the following photo there is a hex portion of the middle of the rods.

    The Super Derecho

  3. #3
    RC Enthusiast
    Join Date
    Oct 2013
    Location
    Grenada, MS.
    Posts
    20
    The wrench that came with mine does not fit any of the toe and camber links.

  4. #4
    RC Enthusiast
    Join Date
    Feb 2014
    Posts
    48
    I had to unscrew the outter end of the camber like and turn it buy hand, but make sure you count the threads that you screw in or the camber wont be the same.

  5. #5
    traxxas71
    Guest
    Mine either

  6. #6
    RC Champion
    Join Date
    Nov 2012
    Location
    Nashville, TN
    Posts
    1,783
    The 8mm side will fit the nut on the slipper clutch shaft.

  7. #7
    RC Competitor
    Join Date
    Mar 2014
    Location
    Where do I live? In a house! (don't we all!)
    Posts
    83
    You drill a 2.5mm hole in it, put fishing line thru it, and it acts a lure coz it's shiny! - and that's about all their good for.
    I found an old Tamiya spanner that fitted better.
    Jesus Is Lord.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •