Results 1 to 9 of 9
  1. #1
    RC Competitor
    Join Date
    Mar 2013
    Location
    Clitherall MN 56524
    Posts
    77

    Traxxas TQI 2.4 radio setup

    Is there a way to reverse only 1 steering channel?

    I am running this radio in a Tamiya Clod and need 1 Ch.1 reversed - I tried switching the plugs around but it senses that and shuts both Ch.1's down all together..

    Any help would be great..

    EDIT -I have the TRX link version that can use a Ipod or Iphone.. I do not have either..
    Last edited by Zac_F71; 09-26-2013 at 07:24 PM.

  2. #2
    RC Turnbuckle Jr. Jimmie Neutron's Avatar
    Join Date
    Oct 2009
    Location
    Alma, MI
    Posts
    12,280
    No there is not... both channel 1's are ran in parallel on the Rx. Also, flipping around the connector only takes the servo ground to Rx signal and servo signal to Rx ground.

    A signal reverser might work...
    Whatever it is I just said... I could be wrong.

  3. #3
    RC Competitor
    Join Date
    Mar 2013
    Location
    Clitherall MN 56524
    Posts
    77
    I see I was able to swap the rear steer servo saver to fix the issue

    NOW ON to the next issue I am having trouble reprogramming the multifunction knob to the throttle sensitivity - I tried like 4 times and it always goes to the steering sensitivity..

  4. #4
    RC Racer
    Join Date
    Oct 2013
    Location
    Polk,NE
    Posts
    133
    I have 2 steering servos on my merv with the TQi transmitter and the second servo is reversed when I have both plugged it

  5. #5
    RC Turnbuckle Jr. Jimmie Neutron's Avatar
    Join Date
    Oct 2009
    Location
    Alma, MI
    Posts
    12,280
    Are both servos the same?
    Whatever it is I just said... I could be wrong.

  6. #6
    RC Racer
    Join Date
    Oct 2013
    Location
    Polk,NE
    Posts
    133
    On my merv, they are both trx2080

  7. #7
    RC Turnbuckle Jr. Jimmie Neutron's Avatar
    Join Date
    Oct 2009
    Location
    Alma, MI
    Posts
    12,280
    Something isn't right... it is impossible for one to receive a different signal than the other. Are you sure they are moving in opposite directions?
    Whatever it is I just said... I could be wrong.

  8. #8
    RC Racer
    Join Date
    Oct 2013
    Location
    Polk,NE
    Posts
    133
    I was looking at it wrong. I apologize

  9. #9
    RC Turnbuckle Jr. Jimmie Neutron's Avatar
    Join Date
    Oct 2009
    Location
    Alma, MI
    Posts
    12,280
    No problem!
    Whatever it is I just said... I could be wrong.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •