Results 1 to 9 of 9
  1. #1
    RC Enthusiast
    Join Date
    Sep 2013
    Posts
    22

    help me with pinion spur combo on brushless..

    i first tried 17pinion 54t 32 spur. way too much top end it flies down the entire driveway but i want more low end, dont need the telluride doing 60 down the driveway, whats a good low pinion you would suggest.

  2. #2
    RC Qualifier
    Join Date
    Oct 2012
    Location
    Puttin out a fire
    Posts
    575
    What battery are you using ? Try 11/54
    E-REVO MMM - Stampede 4x4 6s/3s

  3. #3
    RC Enthusiast
    Join Date
    Sep 2013
    Posts
    22
    venom 5000mah 2s lipos, ill give 11 a shot

  4. #4
    RC Qualifier
    Join Date
    Oct 2012
    Location
    Puttin out a fire
    Posts
    575
    I run my Pede 4X4 on 2s or 3s 11/54 with the Vxl stock motor. It works great on that combo and I get no heat problems. What motor are you running ?
    E-REVO MMM - Stampede 4x4 6s/3s

  5. #5
    RC Qualifier
    Join Date
    Oct 2012
    Location
    Puttin out a fire
    Posts
    575
    I tried mine yesterday 18/54 and its was too much top end for me as well. Fast yes, but lost the torque 11/54 gives me.
    E-REVO MMM - Stampede 4x4 6s/3s

  6. #6
    RC Turnbuckle Jr. rag6's Avatar
    Join Date
    Mar 2008
    Location
    PM me if ya wanna bash at Greenwood Bashplex in Pittsburgh PA
    Posts
    13,258
    What motor? Must know the kv to suggest gearing... 11/54 will be safe unless running a high kv motor. Also are you using the stock slipper or the pede slipper?
    Wanna bash at Greenwood Bashplex in Pittsburgh ???

  7. #7
    Traxxas Employee nixhex32's Avatar
    Join Date
    Mar 2001
    Location
    Ft Worth, tx
    Posts
    280
    on one truck i'm running the stock gearing(pinion and diff), on my other truck i have 15/54 32p diff from my 4x4 slash.
    slash 4x4 lcg, telluride(modded), TCP........and other things

  8. #8
    RC Enthusiast
    Join Date
    Sep 2013
    Posts
    22
    3500 kv its the velineon system, went with it to remain waterproof

  9. #9
    RC Turnbuckle Jr. rag6's Avatar
    Join Date
    Mar 2008
    Location
    PM me if ya wanna bash at Greenwood Bashplex in Pittsburgh PA
    Posts
    13,258
    @ 54/14, my slash was around 25-30 mph, so 11 tooth pinion should get it down to around 20 or so.
    Wanna bash at Greenwood Bashplex in Pittsburgh ???

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •