Results 1 to 3 of 3
  1. #1
    RC poster
    Join Date
    May 2013
    Posts
    2

    New 2.5 trx wont start

    I need help and lots of advice on this. I got a new 2.5 trx nitro motor for a Rustler that I had for 4 years and just getting it to pull over it self was a edit. Now that I can get it to pull over my electric start wont work so I have to use the recoil. It gets fuel but it wont start. I got the glow plug thing you need to use when using a recoil and a new glow plug. By the way I had to use alot of wd-40 to get the new motor to pull over and some oil. any/lots of help would be nice
    Last edited by Double G; 06-06-2013 at 09:09 AM. Reason: language

  2. #2
    RC Qualifier
    Join Date
    Apr 2013
    Posts
    469
    maybe u flooded it. remove plug, rotate flywheel flip upsidd down and drain fuel. reinstall plug and lean out a little the high speed needle till it starts.

  3. #3
    RC Enthusiast
    Join Date
    Apr 2012
    Location
    South West PA
    Posts
    40
    heat the engine up with a hair dryer before trying to start it. The pinch is tight on a new engine.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •