Results 1 to 6 of 6

Hybrid View

  1. #1
    RC poster
    Join Date
    May 2013
    Posts
    10

    How can I cool down the Titan 550 motors??

    I'm running Lipo batteries, so I get longer run time. I switched my pinion gear from a 19T to a 16T which I guess will help. I did run it today and noticed they're still getting pretty warm. Not as hot as before but still hot. I hate to have to stop and wait for them to cool down all the time. So I'm wondering if anyone has any ideas of how to keep the motors cool so I can run longer?? Or how to get the motors to cool down quicker? I just hate sitting and waiting for the motors to cool, when I have plenty of battery left to run..

  2. #2
    RC Champion
    Join Date
    Jan 2012
    Location
    muscoda, wi
    Posts
    1,245
    similar items as this help. to be honest i had a hard time keeping my 550's cool on lipos. i ended up going brushless
    http://www.ebay.com/itm/Castle-Creat...item43bbb59a30
    Last edited by ajcar; 05-19-2013 at 05:23 AM.
    I'm not krazy. My mother had me tested.

  3. #3
    RC Qualifier
    Join Date
    Feb 2013
    Posts
    566
    I would go with a true finned heatsink, with or without a fan. A finned heatsink is passive cooling, depending on air blowing through the body to cool it, so make sure there is openings in the body. Without fins and only a fan, to me alot of the heat transfer is lost.
    I was leaning to something like this with oversized fins
    http://www.ebay.com/itm/290909507417...84.m1438.l2649
    Or a hybrid fan fin setup like this
    http://www.ebay.com/itm/540-550-Elec...item5aee09dac6

    Just because it has fans doesn't mean you have to use them.
    Last edited by Oldrcguy; 05-19-2013 at 11:39 AM.

  4. #4
    RC poster
    Join Date
    May 2013
    Posts
    10
    Ok, so how mush is it to go brushless? Do the motors run cooler, I know they go a lot faster. I'm up in WA so I'd like, to be able to run this in the snow. I heard once you go brushless, its strictly dry conditions. I contacted on the seller on those fans a few weeks ago and he stated they were to small for my truck. Dunno honestly..

  5. #5
    RC Champion
    Join Date
    Jun 2009
    Location
    W Monroe, Louisiana
    Posts
    1,995
    Quote Originally Posted by Wilson1978 View Post
    Ok, so how mush is it to go brushless? Do the motors run cooler, I know they go a lot faster. I'm up in WA so I'd like, to be able to run this in the snow. I heard once you go brushless, its strictly dry conditions. I contacted on the seller on those fans a few weeks ago and he stated they were to small for my truck. Dunno honestly..
    No you can play in wet conditions if you like. http://www.castlecreations.com/produ..._monster2.html
    Its All relative to your perspective.

  6. #6
    RC Qualifier
    Join Date
    Feb 2013
    Posts
    566
    There is a great thread on the E Maxx brushed section where they are discussing going brushless and some of the motors and esc's.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •