So I just finished rebuilding my transmission so I decided to try tuning it and shortly into the process I accidently ran into a curb and broke an a-arm so now im waiting for parts. so heres my question when I go full throttle from start it try to bog out so if I slowly pull throttle too full it work but then bogs when it shifts into second does anyone have any ideas of where im off on my tuning all I know is my idle is high but ill change that after and help will be really appreciated ive been trying to get the tune right for about a month now I would really like to get it close to work properly. p.s. I only bash so im not looking to run it on the lean side I would rather be richer.
Again thanks in advance,