Results 1 to 4 of 4
  1. #1
    RC Racer
    Join Date
    Jul 2011
    Location
    North Florida
    Posts
    205

    Springs to short.

    Ok I swap my rears (green) to the front that had (white) springs. Get (tan) springs for the rear. Prob is they maybe stiffer but they are shorter and I screw out my adjusters to the end of the threads just to have a little preload. Why is this and what options do I have for adding spacers so I can get back some of my adjustments.

    Thanks.

  2. #2
    Marshal Double G's Avatar
    Join Date
    May 2008
    Location
    Putting the wet stuff on the hot stuff
    Posts
    9,794
    You sure you have the right springs? The height of the springs should be the same, the thickness and number of coils is slightly different.
    The Super Derecho

  3. #3
    RC Racer
    Join Date
    Jul 2011
    Location
    North Florida
    Posts
    205
    Well I think so I ordered for the Revo 3.3 and them (green) springs I took off the rear are the same way.

  4. #4
    RC Racer
    Join Date
    Jul 2011
    Location
    North Florida
    Posts
    205
    Part #5440

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •