Results 1 to 5 of 5

Thread: Confused

  1. #1
    RC Competitor
    Join Date
    Feb 2011
    Location
    ID
    Posts
    52

    Question Confused

    I was adjusting the camber and toe on my ERBE the other day and took it out and the shocks were not working at all they would work fine at first but then it would bottom out and never come back up. whats happening?
    Rustler Vxl, Merv, ERBE, Jato 3.3, and others

  2. #2
    RC Turnbuckle Jr. MITCH316's Avatar
    Join Date
    May 2012
    Location
    Australia
    Posts
    3,256
    Check to see if your pivot balls caps aren't binding with the pivot balls from been over tightened. Also check that the hollow balls in the rod ends aren't binding either, I usually give mine a squirt with WD40 and then blow excess off with compressed air.
    Rock n Rolla !

  3. #3
    RC Competitor
    Join Date
    Feb 2011
    Location
    ID
    Posts
    52
    Well i checked it all and sprayed some wd 40 on it and its still doing it.
    Rustler Vxl, Merv, ERBE, Jato 3.3, and others

  4. #4
    RC Qualifier
    Join Date
    Jun 2012
    Posts
    316
    shocks may just need some more oil --- maybe try a little thicker oil in there too

    make sure nothing if hitting the shock the would stop it from coming all the way up

  5. #5
    RC Turnbuckle Jr. MITCH316's Avatar
    Join Date
    May 2012
    Location
    Australia
    Posts
    3,256
    What WT shock oil and springs are you running? I'm running 60 WT oil with Black springs Front and Pink rear.
    Rock n Rolla !

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •