Hey guys, I have owned a tmaxx for years now and decided to bust her out of storage and get back into the hobby. My original 2.5 had many gallons of use so I decided to start fresh with a new 2.5r. I'm having a problem with my throttle linkage to the carb. When I go from WOT to closed the carb is not closing all the way. Everything is moving freely up untill I connect the last piece to the carb. The engine is factory new and yet the carb feels slightly sticky when moving in and out while connected to the low speed needle due to friction from the small amount of play. I'm not too sure I have the entire linkage set correctly. I will include a video demonstrating my problem. Thanks for the help I'm advance.