Results 1 to 9 of 9

Thread: Correct Pins?

  1. #1
    RC Racer
    Join Date
    Dec 2012
    Posts
    129

    Correct Pins?

    http://www3.towerhobbies.com/cgi-bin...&I=LXEMC9&P=SM

    Are these the pins I would need to run with GH bulkheads and RPM arms?

    Also this what I need for the axles?
    http://buy.traxxas.com/product_info....oducts_id=8459

    Or do I need something more?

    Refer to: http://traxxas.com/forums/showthread...and-I-broke-it...
    Last edited by cooleocool; 04-01-2013 at 08:51 AM. Reason: merge

  2. #2
    RC Champion
    Join Date
    Nov 2010
    Location
    u.k.
    Posts
    1,771
    I would measure and check, click=
    Problems.The manual's good starting point. Simple

  3. #3
    RC Racer
    Join Date
    Dec 2012
    Posts
    129
    Quote Originally Posted by trax de max View Post
    I would measure and check, click=
    Thank you! Those are the right pins

    Do you know about those axles?

  4. #4
    RC Champion
    Join Date
    Nov 2010
    Location
    u.k.
    Posts
    1,771
    Not too sure on the shafts. The pins I linked and the ones you linked are two different lengths. The measurement is taking from the groove, not the total length.
    Problems.The manual's good starting point. Simple

  5. #5
    RC Racer
    Join Date
    Dec 2012
    Posts
    129
    Quote Originally Posted by trax de max View Post
    Not too sure on the shafts. The pins I linked and the ones you linked are two different lengths. The measurement is taking from the groove, not the total length.
    Strange, the part number is the same, but you are right on the lengths they are a little different. I'll have to look and make sure I'm getting the right lengths. I measured and found out which ones I need. Still need to know about those shafts tho lol

  6. #6
    RC Champion
    Join Date
    Sep 2011
    Posts
    1,350
    Stock E Maxx axle shafts for the 3903 or 3905 are these:
    http://buy.traxxas.com/advanced_sear...rch=partsearch

    Or the whole assembly are these:
    http://buy.traxxas.com/advanced_sear...rch=partsearch

    Or for a factory fix, these CVD's
    http://buy.traxxas.com/product_info....oducts_id=8047

    Plus

    These extended drive cups work really good together
    http://buy.traxxas.com/product_info....oducts_id=7441

  7. #7
    RC Racer
    Join Date
    Dec 2012
    Posts
    129
    Quote Originally Posted by M n M View Post
    Stock E Maxx axle shafts for the 3903 or 3905 are these:
    http://buy.traxxas.com/advanced_sear...rch=partsearch

    Or the whole assembly are these:
    http://buy.traxxas.com/advanced_sear...rch=partsearch

    Or for a factory fix, these CVD's
    http://buy.traxxas.com/product_info....oducts_id=8047

    Plus

    These extended drive cups work really good together
    http://buy.traxxas.com/product_info....oducts_id=7441
    Thank you very much! I think I need the whole assembly, and what are those extended drive cups use for?

  8. #8
    RC Champion
    Join Date
    Sep 2011
    Posts
    1,350
    Quote Originally Posted by Skink910 View Post
    and what are those extended drive cups use for?
    Some guys have reported that the steel CVD has a tendency to work it's way out of the supplied drive cups when bashing hard. So by replacing the shorter cups with the extended one you keep the drive shaft in the cup.

  9. #9
    RC Racer
    Join Date
    Dec 2012
    Posts
    129
    Ahh I see, thank you. You guys have been so much help!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •