1.) Your donor will be from Team Associated mini-MGT 110cc fuel tank.
2.) Next you have to trim the tabs on the side as much as possible so you will be able to place the tank as far away as you can from the throttle linkage.
3.) Part of the upper deck also needs to be trimmed flushed with the reciever box. The EZ-start has to go to make room.
4.) After making sure that there's enough room for the throttle linkage, use a playdo to mark your drill holes.
5.) Use a punch tool to mark your holes.
6.) Cut 44mm x 23mm off the secondary battery cover.
7.) The tank should sit perfectly.
HAVE FUN AND ENJOY THOSE EXTRA RUN TIMES!