Results 1 to 4 of 4
  1. #1
    RC poster
    Join Date
    Mar 2013
    Posts
    2

    Post Nitro Sport Steering setup problem

    Hi,

    We just purchased Nitro Sport and are going through the set up process. Got to testing steering and the (apologies for not knowing tech part names) white plastic part is apart and will not secure together, seems it needs to be to allow the steering to work. Any advice on what to do greatly appreciated.

    Michael & Jon

    Last edited by cooleocool; 03-24-2013 at 09:33 PM. Reason: merge

  2. #2
    RC Qualifier
    Join Date
    Mar 2012
    Location
    Pittsburgh, PA
    Posts
    662
    That's the servo saver. Looks like the screw came out. Look at the bottom of the chassis through the little hole to see if the screw is still there. If it is, your saver may be broken.


  3. #3
    RC poster
    Join Date
    Mar 2013
    Posts
    2
    Hi,

    Thanks for the reply. There is a screw in there but it is not holding it all in place, looking at your pic is there another small part that holds it in i.e a washer or lug?

  4. #4
    RC Qualifier
    Join Date
    Mar 2012
    Location
    Pittsburgh, PA
    Posts
    662
    No no washer on mine. Take the screw out and pull out the white servo saver. Looks like it came apart. You'll have to remove it to see if it can be put back together.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •