Results 1 to 14 of 14

Thread: cut trenchers?

  1. #1
    RC Racer
    Join Date
    Feb 2013
    Location
    so cal
    Posts
    155

    cut trenchers?

    has anyone cut there trenchers? the regular 1160 style. itching to cut mine. the lil lugs between the big ones. i think the extra space will help it grab rocks and edges better. just dont know if it will dig down in the dirt real quick. thanks
    My posts and summit are a hazard to your health

  2. #2
    RC Qualifier
    Join Date
    Dec 2012
    Location
    Newcastle, Australia
    Posts
    886
    I believe Jamann has
    Slugs are just naturally aspirated snails

  3. #3
    RC Turnbuckle Jr. jamann's Avatar
    Join Date
    Sep 2009
    Location
    Victoria B.C Canada
    Posts
    4,979
    I did and so far it does seem like it helps them to grab a little better.

    zli


    Sent using lipo power
    Mountains cant stop me
    they have tried

  4. #4
    RC Racer
    Join Date
    Feb 2013
    Location
    so cal
    Posts
    155
    did a test snip with some dykes (side cutters). did ok left 1/16 of a inch or so of the lug. how did you do it?. i guess i could use my 1:1 tire iron but one slip and i will have a big vent hole
    My posts and summit are a hazard to your health

  5. #5
    RC Qualifier
    Join Date
    Mar 2012
    Location
    Chehalis, Wa
    Posts
    436
    Quote Originally Posted by gojeepinawillys View Post
    did a test snip with some dykes (side cutters). did ok left 1/16 of a inch or so of the lug. how did you do it?. i guess i could use my 1:1 tire iron but one slip and i will have a big vent hole
    I cut my mud slingers and was going to use my tire groover buy I couldn't find It so i found a set of garbage pallor store scissors (mooth blade) and was going to see if I can make them razor Sharp but to my surprise they cut the lugs with issues. clean job to.
    _______^_
    /______l__\____
    l_l O l_____l O l

  6. #6
    RC Turnbuckle Jr. jamann's Avatar
    Join Date
    Sep 2009
    Location
    Victoria B.C Canada
    Posts
    4,979
    I used a rare special tool.25+ year old set of dykes lol

    It did leave a little.
    I thought about removing it but it will make the tire less likely to tear or puncture there hopefully no issues so far couple good runs in I have some video to go through 24 gigs yesterday
    Lol



    Sent using lipo power
    Mountains cant stop me
    they have tried

  7. #7
    RC Turnbuckle Jr. jamann's Avatar
    Join Date
    Sep 2009
    Location
    Victoria B.C Canada
    Posts
    4,979
    A pic from today. 5 summits

    A couple odd ones from yesterday nostopin is hooked on my bumper





    Sent using lipo power
    Last edited by jamann; 03-24-2013 at 11:43 PM.
    Mountains cant stop me
    they have tried

  8. #8
    RC Competitor
    Join Date
    Mar 2013
    Location
    Tacoma, WA
    Posts
    81
    Nice pics, looks like a killer place to run your trucks. We have lots of woods and terrain in my area of Washington, but not many rocks. Did you do anything to the tire foams?

  9. #9
    RC Turnbuckle Jr. jamann's Avatar
    Join Date
    Sep 2009
    Location
    Victoria B.C Canada
    Posts
    4,979
    No I left them alone.my tires are not vented rims not vented either.
    My glue job is starting to weaken
    So they are vented and damp now.lol
    Added 6 oz to each front rim grabs pretty good now.trimming for sure seems to have helped on the rock.
    I am lucky got every type of terrain to run on lots of forest trails and climbs.
    For mostly trail and some climbing mudslingers are popular and appear to work well.mine is setup to my driving style and terrain.I'm narrower than everyone else I run with so better in some thing suffer in others.few different tires being run head to head sorta
    They do soften up with use and now that spring is coming for us west coasters...lol warmth that will help too


    Sent using lipo power
    Mountains cant stop me
    they have tried

  10. #10
    RC Turnbuckle Jr. jamann's Avatar
    Join Date
    Sep 2009
    Location
    Victoria B.C Canada
    Posts
    4,979
    They seem to work on the rocks.
    Working on some trail footage
    http://youtu.be/4V1oubwqLY8


    Sent using lipo power
    Mountains cant stop me
    they have tried

  11. #11
    RC Racer
    Join Date
    Feb 2013
    Location
    so cal
    Posts
    155
    in that video what motor esc and gear are you using?
    My posts and summit are a hazard to your health

  12. #12
    RC Turnbuckle Jr. jamann's Avatar
    Join Date
    Sep 2009
    Location
    Victoria B.C Canada
    Posts
    4,979
    Dewalt 14.4 evx2 12/68


    Sent using lipo power
    Mountains cant stop me
    they have tried

  13. #13
    RC poster
    Join Date
    Aug 2012
    Location
    Upstate,NY
    Posts
    17
    I see that {nostopin's} green "buggy" summit has mashers..how do they seem to do rock crawling. I have came to the conclusion that the stock Canyons have the most grip on smooth rocks and are the best all around "rock crawling" tire.. Comparing to big joe's, cut (no foam and foamed) mudslingers and worn in trencher x's. Nothing seems to compare in my opinion. I was thinking of cutting the long small lugs on the trencher x's but their side wall is somewhat short. Also rc4wd has the X-Lock Lightning Bolt 40 Series but I cant seem to find any good crawling vids... any opinions??
    Last edited by ZachDaddy67; 03-30-2013 at 11:45 AM.

  14. #14
    RC Turnbuckle Jr. jamann's Avatar
    Join Date
    Sep 2009
    Location
    Victoria B.C Canada
    Posts
    4,979
    Quote Originally Posted by ZachDaddy67 View Post
    I see that {nostopin's} green "buggy" summit has mashers..how do they seem to do rock crawling. I have came to the conclusion that the stock Canyons have the most grip on smooth rocks and are the best all around "rock crawling" tire.. Comparing to big joe's, cut (no foam and foamed) mudslingers and worn in trencher x's. Nothing seems to compare in my opinion. I was thinking of cutting the long small lugs on the trencher x's but their side wall is somewhat short. Also rc4wd has the X-Lock Lightning Bolt 40 Series but I cant seem to find any good crawling vids... any opinions??
    I admit I did not expect much from the mashers but I have to say pretty amazed at how well they do on the trail and rock.still to wide for my taste but they work better than I expected
    Trail vid
    http://youtu.be/dXPVhpPMBrc


    Sent using lipo power
    Mountains cant stop me
    they have tried

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •