Results 1 to 5 of 5

Hybrid View

  1. #1
    RC poster
    Join Date
    Mar 2013
    Posts
    1

    Need help with receiver

    I have a 1/16 slash, and the antenna wire got severed. I soldered it, then covered it in electrical tape, but since then I cannot drive it, and sometimes when it does work, full forward is break, and full reverse is full throttle.
    Last edited by qwert12345as; 03-21-2013 at 07:32 PM.

  2. #2
    RC Champion
    Join Date
    Jul 2012
    Location
    Yakima, Washington
    Posts
    1,421
    by the way welcome to the forums!
    Last edited by revoman78; 03-21-2013 at 07:58 PM.
    With great brushless comes great responsibility.

  3. #3
    RC Turnbuckle Jr.
    Join Date
    Mar 2012
    Location
    so cal
    Posts
    9,244
    the antenna wire is a coaxial cable . small wire in the middle

  4. #4
    RC Competitor
    Join Date
    Jul 2011
    Location
    yankees suck
    Posts
    88
    did you try reversing the channels on the tx? i suppose this wouldnt help w it only function intermittently......if fairly new try calling traxxas

  5. #5
    RC Racer
    Join Date
    Aug 2011
    Posts
    169
    Bad news is you are going to need a new reciver. If you recently bought it you might get luck if you are hones with traxxas and they might take care of you. I doubt it but worth a try, just be honest.

    Good luck.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •