Results 1 to 4 of 4
  1. #1
    RC poster
    Join Date
    Mar 2013
    Posts
    7

    Problem with the racers edge servo saver.

    I purchased a racers edge hitech servo saver today and went to install it on the truck and noticed that it won't fit on my servo gear. What do i do?? Lhs for me is 2.5 hour drive.

  2. #2
    RC Champion
    Join Date
    Jan 2007
    Location
    Michigan
    Posts
    1,678
    What brand servo are you running on your truck?
    Last edited by dave00bear; 03-26-2013 at 02:30 PM.
    My previous sig conflicted with a forum policy.

  3. #3
    RC Champion
    Join Date
    Jan 2012
    Location
    Colorado Springs, CO.
    Posts
    2,012
    Its been some times since I used one, If I am not mistaken, that servo saver has a removable insert that will accomodate different size servos. You'll have to use the insert that will fit your servo. there should be 3 different ones...23, 24, and 25 spline. it the servo is too big for the saver, look to see if there is an insert already in the servo saver you can remove to make it fit.

  4. #4
    RC poster
    Join Date
    Mar 2013
    Posts
    7
    No there is no insert.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •