Results 1 to 3 of 3
  1. #1
    RC poster
    Join Date
    Mar 2013
    Posts
    6

    What Parts To Lubricate On A Revo ?

    Hey guys ! I just ran my Revo in a dirty and muddy track. I stripped it down removing all the electronics, the engine, the gas tank, the wheels, and the tranny. I hosed it down in my backyard and dried it. Does anyone know what parts I should re-lubricate and possibly what lubricant is best for it ? I know my Revo came with silicone oil but I not even sure what that's good for. Thanks !!

  2. #2
    RC Qualifier
    Join Date
    Jan 2013
    Location
    Biggest Little City In The World
    Posts
    723
    I use wd-40. I clean and lube wheel bearings, clutch bell and bearings, slipper clutch bearings. Not every time but now and then ill clean and oil the bearings in the bell cranks and the OWB.
    " You just got passed by a Traxxas"

  3. #3
    RC Qualifier
    Join Date
    Jan 2013
    Location
    Biggest Little City In The World
    Posts
    723
    I forgot i try to clean my hinge pins out as best i can and give them a shot of wd-40 also. If the still feel gritty ill go as far to pull them out and run pipe cleaners through the holes. A lil grit in there will wear the bulk heads out premature.
    " You just got passed by a Traxxas"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •