Results 1 to 11 of 11
  1. #1
    RC Racer
    Join Date
    Feb 2013
    Location
    Ashley, MI
    Posts
    165

    Heat sinks on twin titans?

    I am Getting lipo batteries and I have heard the run the titans really hot so I was going to get heat sinks. How hard will they be to put on the motors with evx-2.

  2. #2
    RC Competitor
    Join Date
    Mar 2013
    Location
    House Springs, Mo
    Posts
    71
    Tell me how the perform. I might get new motors and sinks while I'm saving to go brushless

  3. #3
    RC Qualifier
    Join Date
    May 2011
    Posts
    374
    Quote Originally Posted by Gunamonkey View Post
    I am Getting lipo batteries and I have heard the run the titans really hot so I was going to get heat sinks. How hard will they be to put on the motors with evx-2.
    heat sinks aren't hard to install you simply place them over your motors, they just clamp on.... here are mine they have two fans each that i just connected to the receiver box and they work pretty great, one thing integy actually did right
    The smartest person, asks the most questions...

  4. #4
    RC Racer
    Join Date
    Feb 2013
    Location
    Ashley, MI
    Posts
    165
    U said u plugged it into your receiver What slots did u plug them in?

  5. #5
    RC Competitor
    Join Date
    Mar 2013
    Location
    Clitherall MN 56524
    Posts
    77
    you can plug them into any open channel as they only need a + (positive) and - (negative) to run- They are polarized as well so do not hook them up backwards..(I fried one doing so) they will turn on and off with the ESC

    I hooked mine to the Ch4 on the right side (matched the wire colors to those of the servo's if you know what I mean)


    Mine-

  6. #6
    RC Qualifier
    Join Date
    May 2011
    Posts
    374
    +1 what Zac said
    The smartest person, asks the most questions...

  7. #7
    RC Racer
    Join Date
    Dec 2012
    Posts
    129
    Do the heat sinks and fans keep the twin titans cool enough to run with LiPos?

  8. #8
    RC Qualifier
    Join Date
    Jan 2013
    Location
    Austin Tx
    Posts
    360


    Integy heat sink/fans. Work good so far. Keeps my motors around 135 deg.

  9. #9
    RC Racer
    Join Date
    Dec 2012
    Posts
    129
    Quote Originally Posted by JDenham View Post


    Integy heat sink/fans. Work good so far. Keeps my motors around 135 deg.
    Are you running with LiPos?

  10. #10
    RC Racer
    Join Date
    Feb 2013
    Location
    Ashley, MI
    Posts
    165
    I'm think he is.

  11. #11
    RC Qualifier
    Join Date
    Jan 2013
    Location
    Austin Tx
    Posts
    360
    Ya I'm running two 2s Lipos

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •