Results 1 to 7 of 7
  1. #1
    RC Racer
    Join Date
    Feb 2013
    Location
    Ashley, MI
    Posts
    165

    Mamba monster 2 battery connectors?

    Can I just put a traxxas connector on the two battery leads then buy a series connector to plug into the connector?

  2. #2
    RC Turnbuckle Jr. mike-susieq1's Avatar
    Join Date
    Nov 2010
    Location
    California
    Posts
    4,840
    the mamba monster 2 you have to solder on 2 traxxas connectors as it should be soldered like that or you can just solder 1 traxxas connector male on there and then 2 traxxas female connectors on your lipos/nimh. if you use 1 connector on the esc then you will need a series connector but the wires have to be atleast 12g wire, i made mine out of 10g wire and its working great.
    DEU 8:18 ESV

  3. #3
    RC Racer
    Join Date
    Feb 2013
    Location
    Ashley, MI
    Posts
    165
    Ok thanks for the help

  4. #4
    RC Racer
    Join Date
    Feb 2013
    Location
    Ashley, MI
    Posts
    165
    Another question do I wirer it in series or parallel

  5. #5
    RC Turnbuckle Jr. mike-susieq1's Avatar
    Join Date
    Nov 2010
    Location
    California
    Posts
    4,840
    you want the esc wired in series since the emaxx is made to be ran in series with 2 batteries. Make sure the esc is rated for atleast 4s lipo the higher the max of lipo you can run the better.
    DEU 8:18 ESV

  6. #6
    RC Racer
    Join Date
    Feb 2013
    Location
    Ashley, MI
    Posts
    165
    It's the mamba monster 2 so it can un 4s-6s

  7. #7
    RC Turnbuckle Jr. mike-susieq1's Avatar
    Join Date
    Nov 2010
    Location
    California
    Posts
    4,840
    wire it in series then, there are pics over in the brushless forum and pics online of it wired in series to get the idea of what it looks like, i do believe castle is using 10g wires on the esc last i checked.
    have fun and happy running
    DEU 8:18 ESV

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •