I'm in the middle of installing Tekno M6 driveshafts on the front & rear of my VXL 4x4. I know that the factory settings for rear toe-in are 2.5 degrees on each side. There are multiple ways to set up the rear toe-in with these new Tekno rear hubs. I know most of you will probably say that everyone sets up their truck different according to their driving habits, if you are driving on or off-road & whether you are racing or just bashing in the backyard, local constructions site, etc.
That being said, I still wanted to get some feed back from those of you that are running Teknos on your Stampede. Using the 1.5 or .5 degree Tekno rear hubs & whether you have the "numbers facing forward or rearward", which of the 4 available toe-in settings are you running on your Tekno rear hubs? 1, 2, 3 or 4 degrees of toe-in?