Results 1 to 7 of 7
  1. #1
    RC Enthusiast
    Join Date
    Oct 2012
    Location
    Norfolk, Virginia
    Posts
    30

    Servo Reversing Help.

    While trying to do the Servo Reversing steps, When you are supposed to hold the SET button and it is supposed to blink indicating to turn the nob, mine begins quickly flashing red and green. I still attempted to do the steps but it didn't work.

  2. #2
    RC Champion
    Join Date
    Nov 2012
    Posts
    1,162
    you are suppose to press the menu button to save changes
    http://traxxas.com/sites/default/fil...ual-120130.pdf

  3. #3
    RC Champion
    Join Date
    Jan 2012
    Posts
    2,008
    you dont have to turn the know...doing this procedure is simply using the set and menu buttons.

    it can be a pain to understand the menu if you havent done it before. hang in there, read the manual carefully and if you cant get it call traxxas, surely they can walk you through it over the phone.

  4. #4
    RC Enthusiast
    Join Date
    Oct 2012
    Location
    Norfolk, Virginia
    Posts
    30
    I did read the manual included with my VXL MERV, For the TQi transmitter with it the book included says to use SET. I'm tryuing to get the link posted to load, but having computer difficulties.

  5. #5
    RC Champion
    Join Date
    Jan 2012
    Posts
    2,008
    push and hold "Menu" button for 3 seconds to enter adjustment mode - it should flash green 1 time
    push the menu button 1 time - light should flash green 2 times
    push set button 1 time - light should flash green 1 time
    push set button 1 time- light should flash red 1 time
    push set button 1 time - light should flash green quickly and the servo should be reversed.

    turn transmitter off then back on - you're ready to go

  6. #6
    RC Enthusiast
    Join Date
    Oct 2012
    Location
    Norfolk, Virginia
    Posts
    30
    Thank you Redsawacs, the manual with the merv was nothing like this at all. I appreciate you taking the time to enter that in for me. Worked perfectly! Sorry for the simple issue.

  7. #7
    RC Champion
    Join Date
    Jan 2012
    Posts
    2,008
    Hey man, thats what this forum is for! I dont mind helping at all. Glad it worked, I was going off memory

    Welcome to the forums and congrats on your purchase.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •